Sylvania 60763 User manual

SYLVANIA Luminaires
Installation Guide –Emergency Lights Signs
For warranty coverage,please register at www.sylvania.com/warrantyregistration.
www.sylvania.com
1. Donotuseoutdoors.
2. Equipmentshouldbe mounted securelyinlocationsandatheights where itwill notbereadilysubjectedtotamperingby
unauthorizedpersonnel.
3. Donotmountneargasorelectricheaters
4. Capunusedwireswithenclosedwire nutsorotherapprovedmethod.
5. Donotusethisequipmentforanythingotherthanitsintendeduse.
6. Theuseofaccessory equipmentnot recommendedbythemanufacturerwill voidproductlistingand warrantyand maycause
anunsafecondition.
7. DisconnectACpowerbeforeservicing andinstallation.
8. Consultlocalbuildingcodeforapprovedwiringandinstallation.
9. Usecautionwhenservicingbatteries.Batteryacid cancause burnsto skinandeyes.Ifacidisspilledonskinoreyes,flushacid
withfresh water andcontacta physicianimmediately.
10.Anyserviceonthisequipmentshouldbeperformedbyqualifiedpersonnelonly.
11.Makesurewireterminationsaresecure andleadsareproperlytuckedin appropriatewirechannels.
E24646
The battery in this unit may not be fully charged after electricity is connected to the
unit, let the battery charge for at least 24 hours. Normal operation of this unit should
then take effect. To check, Press the push-to-test switch, the light inside the unit
should then turn on.

Competitor Product Comparison Confidential –for internal use only
IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE.
GENERAL: Upon receipt of the product, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier.
INSTALLATION:
Product Information
E24646
Mounting Instructions (J-Box)
1.Feed fixture leads through the back plate and
connect to AC power supply (Fig A). 2.Connect
wires through J-Box. Mount back plate on J-Box
and secure with screws. 3.Connect battery only
after continuous AC power can be provided to
the unit (Fig B).
4.Align snaps and push housing directly onto main bottom
case (Fig C). Apply continuous AC power and press 'TEST"
button to check light.
Wiring Diagrams
Maintenance:
BATTERY: The battery supplied with the Battery Backup model requires no maintenance. However, it
should be tested periodically replaced when it no longer operates the connected fixtures for the duration of a
30-second or 90-minute test. The battery supplied in this equipment has a life expectancy of 5 years when
used in a normal ambient temperature of 72º .
Mounting Instructions (Conduit)
1. Secure back plate to wall surface. Route wires
through hole in conduit flange and make conduit
connection.
2. Connect battery only after continuous AC power can
be provided to the unit (Fig B).
3. Align snaps and push housing directly onto the back
plate (Fig.C). Apply continuous AC power and press
“TEST” button to check light.