CALL
Lo (Low battery)
rFEr
P
U_
「」, number
outr
ExplanationGuest pager display GP-200R display
When it receivers a call
Low battery, recharging is required
Faulty RF, No reception – Please contact us
% of remaining battery
Version information (ex. U-32)
When RF o, 「」and number will be ashed. Stack up the pager on the charger
Alerting when the guest pager is in out of range area.
It will be stopped when it is within the range.
5-1. Screen Display Description
Caution! The transmitter’s group & channel numbers and guest pagers’group & channel numbers
should be identical. Please stack up all guest pagers on the charger before setting.
Random Number Setting is able to allocate any numbers to each guest pager whenever it is used.
Advantage :using any numbers depending on the situation. (range: 1~9999)
5-2-1. Input a Random Number ▶[7P] 6-1-1. How to Call a Random Number
Caution) Although there is a number‘0’ or other number by Fn,
Please follow the instruction below from the beginning.
※The random number function is not usable when GP-1000T is in interactive transmission mode.
Please set the GP-1000T as simplex mode if you wish to use the random number function
- Refer to GP-1000T additional features.
5-2. Random Number Setting
FUN
DEL
Press it longer
NEXT
Move to [Fn]
Enter to General Functions
0
Rc
0
Fn
5. Display Description & Guest Pager Number Setting
CALL
Save
ESC
Exit
1
2
3
4
44
P33 GP2
N
Gn
0
Fn
-n
Input number ‘0’
0U
0
0
0
0
0
0
0
0
0
0
CAL
Lo
rFE
P
U_
「」, number
out
