System air SYSHP MINI SPLIT 06-16 + TANK User manual

SYSHP MINI SPLIT 06-16 + TANK
Mini Heat Pump Split Series
Engineering Data Manual
Air Conditioning
7,0 to 14,0 kW 6,35 to 16,0 kW
R32

1
CONTENTS
Part 1 General Informaon.....................................................................................3
Part 2 Engineering Data ........................................................................................11
Part 3 Field Sengs .............................................................................................45

2

3
Part 1
General Informaon
1 Air-to-Water HP Split System ...........................................................................4
2 Unit Capacies ................................................................................................6
3 Nomenclature .................................................................................................6
4 System Design and Unit Selecon ....................................................................9

4
1 Air-to-Water HP Split System
1.1 System Schemac
It is an integrated air-to-water heat pump system which is one-stop soluon for space heang, space cooling and domesc hot
water. The outdoor heat pump system extracts heat from the outdoor air and transfers this heat through refrigerant piping to the
plate heat exchanger in the hydro module with water tank. The heated water in the hydro module circulates to low temperature
heat emiers (under-oor heang loops or low temperature radiators) to provide space heang. The 4-way valve in the outdoor
unit can reverse the refrigerant cycle so that the hydro module can provide chilled water for cooling using fan coil units. Because
the water tank is integrated design in the hydro module, so it can provide hot water directly to the users.
The heang capacity of heat pumps decreases with ambient temperature dropping. Backup electric heater is standard equipped
to provide addional heang capacity for use during extremely cold weather when the heat pump capacity is insucient.
Water supply
Floor heang
Mixing staon
Hot water
Buer tank
Indoor unit
Outdoor unit
Radiator

5
1.2 System Conguraons
It can be congured to run with the electric heater either enabled or disabled and can also be used in conjuncon with an
auxiliary heat source such as a boiler.
The chosen conguraon aects the size of heat pump that is required. Three typical conguraons are described below.
Conguraon 1: Heat pump only
▪ The heat pump covers the required capacity and no extra heang capacity is necessary.
▪ Requires selecon of larger capacity heat pump and implies higher inial investment.
▪ Ideal for new construcon in projects where energy eciency is paramount.
Conguraon 2: Heat pump and backup electric heater (Hydro module with water tank is standard with 3kW backup electric
heater)
▪Heat pump covers the required capacity unl the ambient temperature drops below the point at which the heat pump
is able to provide sucient capacity. When the ambient temperature is below this equilibrium point, the backup electric
heater supplies the required addional heang capacity.
▪Best balance between inial investment and running costs, results in lowest lifecycle cost.
▪Ideal for new construcon.
Conguraon 3: Heat pump conjuncon with auxiliary heat source
▪ Heat pump covers the required capacity unl the ambient temperature drops below the point at which the heat pump is
able to provide sucient capacity. When the ambient temperature is below this equilibrium point, depending on the system
sengs, either the auxiliary heat source supplies the required addional heang capacity or the heat pump does not run and
the auxiliary heat source covers the required capacity.
▪ Enables selecon of lower capacity heat pump.
▪ Ideal for refurbishments and upgrades.
System conguraons
Conguraon 1
Conguraon 2
Conguraon 3
Heat pump capacity
Required capacity
Ambient temperature
Highest temperature
(No more heang)
Lowest temperature
(Design temperature)
Equilibrium points
Capacity

6
2 Unit Capacies
2.1 Outdoor unit
2.2 Hydronic box
Capacity 4kW 6kW
SYSHP MINI SPLIT ODU 04 Q SPLIT ODU 06 Q
Power Supply (V/Ph/Hz) 220-240/1 /50 220-240/1 /50
Appearance
Capacity 8kW 10kW 12kW 14kW 16kW
SYSHP MINI SPLIT ODU 08 Q SPLIT ODU 10 Q SPLIT ODU 12 Q SPLIT ODU 12 R SPLIT ODU 14 Q SPLIT ODU 14 R SPLIT ODU 16 Q SPLIT ODU 16 R
Power Supply
(V/Ph/Hz) 220-240/1/50 220-240/1/50 220-240/1/50 380-415/3/50 220-240/1/50 380-415/3/50 220-240/1/50 380-415/3/50
Appearance
Model SYSHP MINI SPLIT TANK 190 Q SPLIT TANK 240 XL Q SPLIT TANK 240 Q
Power Supply (V/Ph/Hz) 220-240/1 /50 220-240/1 /50 220-240/1 /50
Compable outdoor unit model SYSHP MINI
SPLIT ODU 12 Q
SPLIT ODU 04 Q SPLIT ODU 04 Q SPLIT ODU 14 Q
SPLIT ODU 06 Q SPLIT ODU 06 Q SPLIT ODU 16 Q
SPLIT ODU 08 Q SPLIT ODU 08 Q SPLIT ODU 12 R
SPLIT ODU 10 Q SPLIT ODU 10 Q SPLIT ODU 14 R
SPLIT ODU 16 R
Appearance

7
SYSHP MINI SPLIT ODU 06 Q
3 Nomenclature
3.1 Outdoor unit
Power Supply
R: 3-phase, 380-415V, 50Hz
Q: 1-phase, 220-240V, 50Hz
Capacity in kW
ODU: outdoor unit
Split version
Model

8
SYSHP MINI SPLIT TANK 190 Q
3.2 Hydro module with water tank
Power Supply
Q: 1-phase, 220-240V, 50Hz
Capacity in kW
TANK: indoor unit
Split version
Model

9
Calculate condioned surface area
Select the heat emiers (type, quanty, water temperature and heat load)
Step 2: System conguraon
Decide whether to include AHS and set AHS’ s switching temperature
Decide whether backup electric heater is enabled or disabled
Step 3: Selecon of outdoor units
Determine required total heat load on outdoor units
Set capacity safety factor
Select power supply
Provisionally select the heat pump unit capacity based on nominal capacity
Correct capacity of the outdoor units for the following items:
Outdoor air temperature / Outdoor humidity / Water outlet temperature1/
Altude / An-freeze uid
Heat pump Split system
selecon is complete
4 System Design and Unit Selecon
4.1 Selecon procedure
Step 1: Total heat load calculaon
Is corrected Heat Pump Split unit capacity ≥ Required total heat load on outdoor
units2
Yes No
Select a larger model or enable
backup electric heater operaon
Notes:
1. If the required water temperatures of the heat emiers are not all the same, the Heat Pump Split’s outlet water temperature seng should be set at the
highest of the heat emier required water temperatures. If the water outlet design temperature falls between two temperatures listed in the outdoor
unit’s capacity table, calculate the corrected capacity by interpolaon.
2. If the outdoor unit selecon is to be based on total heang load and total cooling load, select Split units which sasfy both total heang and cooling load
requirements.

10
4.2 Heat Pump Leaving Water Temperature (LWT) Selecon
The recommended design LTW ranges for dierent types of heat emier are:
▪ For oor heang: 30 to 35⁰ C
▪ For fan coil units: 40 to 45⁰ C
▪ For low temperature radiators: 40 to 50⁰ C
4.3 Opmizing System Design
To get the most comfort with the lowest energy consumpon with the Heat Pump , it is important to take account of the following
consideraons:
▪ Choose heat emiers that allow the heat pump system to operate at as low a hot water temperature as possible whilst sll
providing sucient heang.
▪ Make sure the correct weather dependency curve is selected to match the installaon environment (building structure,
climate) as well as ender user’s demands.
▪ Connecng room thermostats (eld supplied) to the hydro system helps prevent excessive space heang by stopping the
outdoor unit and circulator pump when the room temperature is above the thermostat set point.
4.4 Tank back up heater noce
Heat pump will stop when T5(tank temperature) has reached the minimum of both T5S(tank seng temperature) and T5stop
(highest tank temperature which can be reached under certain ambient temperature with heat pump only) and lasted for 5s.
The value of T5stop is shown as below.
If T5S is higher than T5stop, then T5S can not be reached with heat pump only. In this case, tank back up heater is needed in
order to reach T5S.
T5stop value:
Ambient temperature(°C) < -20 -20~15 -15~-10 -10~-5 -5~0 0~5 5~10
T5stop(°C) 35 40 45 48 52 55 56
Ambient temperature(°C) 10~15 15~20 20~25 25~30 35~40 40~65 40~65
T5stop(°C) 57 56 55 52 50 48 45

11
Part 2
Engineering Data
1 Specicaons ................................................................................................12
2 Dimensions ...................................................................................................20
3 Operang Limits.............................................................................................22
4 Capacity Tables .............................................................................................23
5 Hydronic Performance ...................................................................................40
6 Sound Levels..................................................................................................41

12
1 Specicaons
1.1 Outdoor Unit
Model name SYSHP MINI SPLIT ODU 04 Q SPLIT ODU 06 Q SPLIT ODU 08 Q SPLIT ODU 10 Q
Indoor Unit Model SYSHP MINI SPLIT TANK 190 Q
Heang
A7W35
Capacity kW 4.25 6.20 8.30 10.0
Rated input kW 0.82 1.24 1.60 2.00
COP 5.20 5.00 5.20 5.00
A7W45
Capacity kW 4.35 6.35 8.20 10.0
Rated input kW 1.14 1.69 2.08 2.63
COP 3.80 3.75 3.95 3.80
A-7W35
Capacity kW 4.80 6.10 7.10 8.25
Rated input kW 1.52 2.00 2.18 2.62
COP 3.15 3.05 3.25 3.15
A-7W55
Capacity kW 4.00 5.15 6.15 6.85
Rated input kW 2.05 2.58 3.00 3.43
COP 1.95 2.00 2.05 2.00
Cooling
A35W18
Capacity kW 4.50 6.55 8.40 10.00
Rated input kW 0.81 1.34 1.66 2.08
EER 5.55 4.90 5.05 4.80
A35W7
Capacity kW 4.70 7.00 7.40 8.20
Rated input kW 1.36 2.33 2.19 2.48
EER 3.45 3.00 3.38 3.30
DHW
Tapping prole according EN16147 L
Water heang
energy eciency
class(1)
Warm climate
class A+ A+ A+ A+
COP 3.80 3.80 3.66 3.66
Average climate
class A+ A+ A+ A+
COP 3.10 3.10 3.02 3.02
Cold climate
class A A A A
COP 2.50 2.50 2.61 2.61
Seasonal space heang
energy eciency class(2)
Water outlet at 35⁰C
class A+++ A+++ A+++ A+++
SCOP 4.85 4.95 5.21 5.19
Water outlet at 55⁰C
class A++ A++ A++ A++
SCOP 3.31 3.52 3.36 3.49
Rated water ow m3/h 0.73 1.07 1.43 1.72
Outdoor
Unit
Power supply V/Ph/Hz 220-240/1/50
Rated input W 2200 2600 3300 3600
Rated current A 10.5 12.0 14.5 16.0
Unit dimension (W×H×D) mm 1008×712×426 1118×865×523
Packing dimension (W×H×D) mm 1065×810×485 1190×970×560
Net/Gross weight kg 60/65.5 78.5/92
Refrigerant
Type(GWP) R32(675)
Charged volume kg 1.50 1.65
Refrigerant to be added g/m 20 38
Refrigerant
piping connecons
Liquid/Gas side mm Φ6.35 / Φ15.9 Φ9.52 / Φ15.9
Max. piping length m 30
Max. dierence in height m20

13
Note:
(1)According to EN16147/2017;EU No:811/2013
(2)According to EN14511/2018; EN14825/2018; EU No:811/2013
(3)Sound power in heang mode, measured according to the EN 12102 under condions of the EN 14825
Drain connecon DN32
Outdoor unit sound Power Level(3) dB 56 58 59 60
Ambient
temperature
range
Heang °C -25~35
Cooling °C -5~43
Domesc hot water °C -25~43
Indoor
Unit
Model
Power supply V/Ph/Hz 220-240/1/50
Rated input W 3095
Rated current A 13.5
DHW Tank
Type Stainless steel
Material - SUS 316L
Water Volume l190
Maximum water
temperature(Disinfecon
mode)
°C 70
Maximum water pressure
limit bar 10
Insulaon Material -Polyurethane (Cyclopentane)
Insulaon Thickness mm 45
Heat Exchanger Plate heat exchanger
Backup E-heater
Standard mounted kW 3
Capacity steps 1
Water Pump
Type DC-inventer
Max. head m 9
Expansion vessel Volume L8
Water Piping
connecon
Water circuit
Inlet
R1”
Outlet
DHW tank water circuit
Cold Inlet
R3/4”
Hot Outlet
Recirculaon
Unit dimension (W×H×D) mm 600*600*1683
Packing dimension (W×H×D) mm 730*730*1920
Net/Gross weight kg 140 / 161
Ambient temperature range °C 5~35
LWT seng
range
Heang °C 25~65
Cooling °C 5~25
Domesc hot water °C 30~60
Indoor unit sound Power Level(3) dB 38 40

14
Model name SYSHP MINI SPLIT ODU 04 Q SPLIT ODU 06 Q SPLIT ODU 08 Q SPLIT ODU 10 Q
Indoor Unit Model SYSHP MINI SPLIT TANK 240 XL Q
Heang
A7W35
Capacity kW 4.25 6.20 8.30 10.0
Rated input kW 0.82 1.24 1.60 2.00
COP 5.20 5.00 5.20 5.00
A7W45
Capacity kW 4.35 6.35 8.20 10.0
Rated input kW 1.14 1.69 2.08 2.63
COP 3.80 3.75 3.95 3.80
A-7W35
Capacity kW 4.80 6.10 7.10 8.25
Rated input kW 1.52 2.00 2.18 2.62
COP 3.15 3.05 3.25 3.15
A-7W55
Capacity kW 4.00 5.15 6.15 6.85
Rated input kW 2.05 2.58 3.00 3.43
COP 1.95 2.00 2.05 2.00
Cooling
A35W18
Capacity kW 4.50 6.55 8.40 10.00
Rated input kW 0.81 1.34 1.66 2.08
EER 5.55 4.90 5.05 4.80
A35W7
Capacity kW 4.70 7.00 7.40 8.20
Rated input kW 1.36 2.33 2.19 2.48
EER 3.45 3.00 3.38 3.30
DHW
Tapping prole according EN16147 XL
Water heang
energy eciency
class(1)
Warm climate
class A+ A+ A+ A+
COP 4.24 4.24 4.18 4.18
Average climate
class A+ A+ A+ A+
COP 3.34 3.34 3.36 3.36
Cold climate
class A A A A
COP 2.63 2.63 2.72 2.72
Seasonal space heang
energy eciency class(2)
Water outlet at 35⁰C
class A+++ A+++ A+++ A+++
SCOP 4.85 4.95 5.21 5.19
Water outlet at 55⁰C
class A++ A++ A++ A++
SCOP 3.31 3.52 3.36 3.49
Rated water ow m3/h 0.73 1.07 1.43 1.72
Outdoor
Unit
Power supply V/Ph/Hz 220-240/1/50
Rated input W 2200 2600 3300 3600
Rated current A 10.5 12.0 14.5 16.0
Unit dimension (W×H×D) mm 1008×712×426 1118×865×523
Packing dimension (W×H×D) mm 1065×810×485 1190×970×560
Net/Gross weight kg 60/65.5 78.5/92
Refrigerant
Type(GWP) R32(675)
Charged volume kg 1.50 1.65
Refrigerant to be added g/m 20 38
Refrigerant
piping connecons
Liquid/Gas side mm Φ6.35 / Φ15.9 Φ9.52 / Φ15.9
Max. piping length m 30
Max. dierence in height m20

15
Note:
(1)According to EN16147/2017;EU No:811/2013
(2)According to EN14511/2018; EN14825/2018; EU No:811/2013
(3)Sound power in heang mode, measured according to the EN 12102 under condions of the EN 14825
Drain connecon DN32
Outdoor unit sound Power Level(3) dB 56 58 59 60
Ambient
temperature
range
Heang °C -25~35
Cooling °C -5~43
Domesc hot water °C -25~43
Indoor
Unit
Model
Power supply V/Ph/Hz 220-240/1/50
Rated input W 3095
Rated current A 13.5
DHW Tank
Type Stainless steel
Material - SUS 316L
Water Volume l240
Maximum water
temperature(Disinfecon
mode)
°C 70
Maximum water pressure
limit bar 10
Insulaon Material -Polyurethane (Cyclopentane)
Insulaon Thickness mm 45
Heat Exchanger Plate heat exchanger
Backup E-heater
Standard mounted kW 3
Capacity steps 1
Water Pump
Type DC-inventer
Max. head m 9
Expansion vessel Volume L8
Water Piping
connecon
Water circuit
Inlet
R1”
Outlet
DHW tank water circuit
Cold Inlet
R3/4”
Hot Outlet
Recirculaon
Unit dimension (W×H×D) mm 600*600*1943
Packing dimension (W×H×D) mm 730*730*2180
Net/Gross weight kg 157 / 178
Ambient temperature range °C 5~35
LWT seng
range
Heang °C 25~65
Cooling °C 5~25
Domesc hot water °C 30~60
Indoor unit sound Power Level(3) dB 38 40

Model name SYSHP MINI SPLIT ODU 12 Q SPLIT ODU 14 Q SPLIT ODU 16 Q
Indoor Unit Model SYSHP MINI SPLIT TANK 240 Q
Heang
A7W35
Capacity kW 12.1 14.5 16.0
Rated input kW 2.44 3.09 3.56
COP 4.95 4.70 4.50
A7W45
Capacity kW 12.3 14.2 16.0
Rated input kW 3.24 3.89 4.44
COP 3.80 3.65 3.60
A-7W35
Capacity kW 10.0 12.0 13.3
Rated input kW 3.33 4.29 4.93
COP 3.00 2.80 2.70
A-7W55
Capacity kW 10.0 11.0 12.5
Rated input kW 4.88 5.37 6.19
COP 2.05 2.05 2.02
Cooling
A35W18
Capacity kW 12.0 13.5 14.2
Rated input kW 3.0 3.74 3.94
EER 4.0 3.61 3.61
A35W7
Capacity kW 11.6 12.7 14.0
Rated input kW 4.22 4.98 5.71
EER 2.75 2.55 2.45
DHW
Tapping prole according EN16147 XL
Water heang
energy eciency
class(1)
Warm climate
class A+ A+ A+
COP 3.73 3.73 3.73
Average climate
class A+ A+ A+
COP 3.00 3.00 3.00
Cold climate
class A A A
COP 2.24 2.24 2.24
Seasonal space heang
energy eciency class(2)
Water outlet at 35⁰C
class A+++ A+++ A+++
SCOP 4.81 4.72 4.62
Water outlet at 55⁰C
class A++ A++ A++
SCOP 3.45 3.47 3.41
Rated water ow m3/h 2.08 2.49 2.75
Outdoor
Unit
Power supply V/Ph/Hz 220-240/1/50
Rated input W 5400 5700 6100
Rated current A 24.5 25.0 26.0
Unit dimension (W×H×D) mm 1118×865×523
Packing dimension (W×H×D) mm 1190×970×560
Net/Gross weight kg 100/113.5
Refrigerant
Type(GWP) R32(675)
Charged volume kg 1.84
Refrigerant to be added g/m 38
Refrigerant
piping connecons
Liquid/Gas side mm Φ9.52 / Φ15.9
Max. piping length m 30
Max. dierence in height m20
16

Drain connecon DN32
Outdoor unit sound Power Level(3) dB 64 65 68
Ambient
temperature
range
Heang °C -25~35
Cooling °C -5~43
Domesc hot water °C -25~43
Indoor
Unit
Model
Power supply V/Ph/Hz 220-240/1/50
Rated input W 3095
Rated current A 13.5
DHW Tank
Type Stainless steel
Material - SUS 316L
Water Volume l240
Maximum water
temperature(Disinfecon
mode)
°C 70
Maximum water pressure
limit bar 10
Insulaon Material -Polyurethane (Cyclopentane)
Insulaon Thickness mm 45
Heat Exchanger Plate heat exchanger
Backup E-heater
Standard mounted kW 3
Capacity steps 1
Water Pump
Type DC-inventer
Max. head m 9
Expansion vessel Volume L8
Water Piping
connecon
Water circuit
Inlet
R1”
Outlet
DHW tank water circuit
Cold Inlet
R3/4”
Hot Outlet
Recirculaon
Unit dimension (W×H×D) mm 600*600*1943
Packing dimension (W×H×D) mm 730*730*2180
Net/Gross weight kg 159 / 180
Ambient temperature range °C 5~35
LWT seng
range
Heang °C 25~65
Cooling °C 5~25
Domesc hot water °C 30~60
Indoor unit sound Power Level(3) dB 42 44 44
17
Note:
(1)According to EN16147/2017;EU No:811/2013
(2)According to EN14511/2018; EN14825/2018; EU No:811/2013
(3)Sound power in heang mode, measured according to the EN 12102 under condions of the EN 14825

Model name SYSHP MINI SPLIT ODU 12 R SPLIT ODU 14 R SPLIT ODU 16 R
Indoor Unit Model SYSHP MINI SPLIT TANK 240 Q
Heang
A7W35
Capacity kW 12.1 14.5 16.0
Rated input kW 2.44 3.09 3.56
COP 4.95 4.70 4.50
A7W45
Capacity kW 12.3 14.2 16.0
Rated input kW 3.24 3.89 4.44
COP 3.80 3.65 3.60
A-7W35
Capacity kW 10.0 12.0 13.3
Rated input kW 3.33 4.29 4.93
COP 3.00 2.80 2.70
A-7W55
Capacity kW 10.0 11.0 12.5
Rated input kW 4.88 5.37 6.19
COP 2.05 2.05 2.02
Cooling
A35W18
Capacity kW 12.0 13.5 14.2
Rated input kW 3.0 3.74 3.94
EER 4.0 3.61 3.61
A35W7
Capacity kW 11.6 12.7 14.0
Rated input kW 4.22 4.98 5.71
EER 2.75 2.55 2.45
DHW
Tapping prole according EN16147 XL
Water heang
energy eciency
class(1)
Warm climate
class A+ A+ A+
COP 3.73 3.73 3.73
Average climate
class A+ A+ A+
COP 3.00 3.00 3.00
Cold climate
class A A A
COP 2.24 2.24 2.24
Seasonal space heang
energy eciency class(2)
Water outlet at 35⁰C
class A+++ A+++ A+++
SCOP 4.81 4.72 4.62
Water outlet at 55⁰C
class A++ A++ A++
SCOP 3.45 3.47 3.41
Rated water ow m3/h 2.08 2.49 2.75
Outdoor
Unit
Power supply V/Ph/Hz 380-415/3/50
Rated input W 5400 5700 6100
Rated current A 9.0 10.0 11.0
Unit dimension (W×H×D) mm 1118×865×523
Packing dimension (W×H×D) mm 1190×970×560
Net/Gross weight kg 116/129.5
Refrigerant
Type(GWP) R32(675)
Charged volume kg 1.84
Refrigerant to be added g/m 38
Refrigerant
piping connecons
Liquid/Gas side mm Φ9.52 / Φ15.9
Max. piping length m 30
Max. dierence in height m20
18

Drain connecon DN32
Outdoor unit sound Power Level(3) dB 64 65 68
Ambient
temperature
range
Heang °C -25~35
Cooling °C -5~43
Domesc hot water °C -25~43
Indoor
Unit
Model
Power supply V/Ph/Hz 220-240/1/50
Rated input W 3095
Rated current A 13.5
DHW Tank
Type Stainless steel
Material - SUS 316L
Water Volume l240
Maximum water
temperature(Disinfecon
mode)
°C 70
Maximum water pressure
limit bar 10
Insulaon Material -Polyurethane (Cyclopentane)
Insulaon Thickness mm 45
Heat Exchanger Plate heat exchanger
Backup E-heater
Standard mounted kW 3
Capacity steps 1
Water Pump
Type DC-inventer
Max. head m 9
Expansion vessel Volume L8
Water Piping
connecon
Water circuit
Inlet
R1”
Outlet
DHW tank water circuit
Cold Inlet
R3/4”
Hot Outlet
Recirculaon
Unit dimension (W×H×D) mm 600*600*1943
Packing dimension (W×H×D) mm 730*730*2180
Net/Gross weight kg 159 / 180
Ambient temperature range °C 5~35
LWT seng
range
Heang °C 25~65
Cooling °C 5~25
Domesc hot water °C 30~60
Indoor unit sound Power Level(3) dB 42 44 44
19
Note:
(1)According to EN16147/2017;EU No:811/2013
(2)According to EN14511/2018; EN14825/2018; EU No:811/2013
(3)Sound power in heang mode, measured according to the EN 12102 under condions of the EN 14825