System Build 7559337COM User manual

7559337COM
Beverage Cabinet
B347559337COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
12
34
Press parts together so CAM BOLT inserts
into edge hole.
Press CAM BOLT into hole. Press CAM LOCK into hole.
End hole
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Arrow to point towards end
hole in edge of part.

4
systembuild.com
Before You Start
Quick
Assembly
Tip
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
systembuild.com
Board Identification
Not actual size
Left Panel
37559337010 Right Panel 37559337020 Partition
37559337030
Top
37559337040
Bottom
37559337050 Adjustable Shelf
37559337060
Divider Shelf
37559337070
Divider Partition
37559337080
Pull Out Shelf
37559337090
Pull Out Molding
37559337100
ABC
D
E
F
G
H
I
J

6
systembuild.com
Board Identification
Not actual size
Door Assembly
37559337110
Drawer Front Assembly
37559337120
L
This piece is paperboard
construction. It is not made
from wood, but is required for
the assembly of your unit.
M
Back Panel
K755933700
Drawer Side (x2)
399951490346200C
Drawer Back
39995149030840B
Drawer Bottom
39995340031910D
DWR
SIDE
DWR
BACK
DWR
BTM
K

7
systembuild.com
Board Identification
A
B
D
E
C
F
H
HH
G
G
K
M
I
JL
DWR
SIDE
DWR
SIDE
DWR
BACK
DWR
BTM
This piece is paperboard
construction. It is not made
from wood, but is required for
the assembly of your unit.

8
systembuild.com
Part List
Actual Size
(x6)
#A22700
cam lock
(x6)
#A22710
cam bolt
(x3)
#A21660
wood dowel
(x6)
#A23030
confirmat screw
(x4)
#A80250
shelf support
(x8)
#A12120
#8 x 7/16" pan
(x16)
#A11080
#6 x 7/16" flat
(x4)
#A21970
drive fastener
(x2)
#A17400
7/8" bolt
(x2)
#A17030
5/16" bolt
(x2)
#A89210
rubber pad
(x2)
#A22760
quickloc fastener
(x35)
#A21110
nail
1
2
34
5678
9
11
12 13
For this item we provide extra hardware.
Please be aware that you will not use all the hardware provided.
10

9
systembuild.com
Part List
Not Actual Size
(x2)
#A54520
plastic bracket
15a
15b
15c
15d
(x2)
#A56750
drawer slide pkg.
left cabinet member
right cabinet member
left drawer member
right drawer member
16 17
(x2)
#A65615
euro hinge
18
(x2)
#A50415
handle
(x5)
#A43105
plastic foot
19
14a
14b
14c
14d
(x1)
#A84050
safety kit
14

10
systembuild.com
STEP1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
1
3
(x1)
15a
7
(x2)
3
1
marked with an (L)
1
7
7
7
15a
A
(x1)
left cabinet member
finished edge
15a

11
systembuild.com
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
3
7
(x2) (x1) (x2)
15b
1
3
marked with an (R)
B
7
7
1
15b
7
(x1)
right cabinet member
finished edge
15b

12
systembuild.com
STEP3
13
7
(x2) (x1) (x4)
15b
(x1)
(x1)
7
7
7
7
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
1
3
marked with an (R)
7
15a
marked with an (L)
C
C
turn over
15a
15b
left cabinet member
right cabinet member
15a
finished edge
7
15b

13
systembuild.com
STEP4
2
(x6)
2
(x1)
2
2
2
2
2
D
14a
14b
14a
14b
Do not fully tighten screw.

14
systembuild.com
STEP5
UNLOCKLOCK
raw edges
D
A
C
B

15
systembuild.com
STEP6
4
(x6)
4
4
4
4
4
4raw edge
D
A
CB
E

16
systembuild.com
STEP7
19
(x5)
19
19
19
19
19
Note: You may need to tap feet with a hammer to fully insert.
A
C
D
B
E

17
systembuild.com
STEP8
(x35)
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
13
13
Carefully turn the cabinet over on it's front side. Align squarely with
outer edges.
Flush bottom edge of back panel with the bottom edge
of bottom and nail straight into back edges of bottom, left panel,
partition, right panel & top.
raw surface
E
B
M

18
systembuild.com
STEP9
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW
THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS
PRODUCT.
WARNING
Serious or fatal crushing injuries can
occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest
drawers
* Unless specifically designed to
accommodate, do not set TVs or other
heavy objects on the top of this product
* Never allow children to climb or hang
on drawers, door, or shelves
* Never open more than one drawer at a
time
Use of tipover restraints may only
reduce, but not eliminate the risk of
tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned
in this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the
safety bracket into the stud. Drive the screw through the safety bracket into the wall stud. Tighten the screw
that was not fully tightened in step 4.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your
unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is
flush. Move your unit into location and fasten the wall bracket to the wall anchor with the screw. Tighten the
screw that was not fully tightened in step 4.
stud
wallboard
hole
14d
14c
14c
14d
(x1)

19
systembuild.com
STEP10
616
(x4) (x2)
DWR
SIDE
DWR
SIDE
6
6
6
16 16
6

20
systembuild.com
STEP11
6
(x4)
6
6
Center the groove in the drawer sides with the groove
in the drawer front (L). Attach as shown with screws (6).
L
DWR
SIDE
DWR
SIDE
6