System Build 7921414COM User manual

7921414COM
24 in Cabinet
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B347921414COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
37360056011
Right Panel
37360056021
Top
37362056030
Bottom
37921056040
Shelf
37362056050
Back Panel
K73625600
Door (x2)
37921414070
Adjustable Shelf (x3)
37362056060
AB
F
G
H
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
C
D
E

5
systembuild.com
Board Identification
Not actual size
Tube
You
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
E
F
G
H
A
B
C
D
G
F
F

6
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
(x8)
#A22620
cam lock
(x8)
#A22610
cam bolt
(x4)
#A17400
bolt
(x12)
#A80250
shelf support
(x8)
#A12420
5/8" screw
(x4)
#A13410
1-3/4" screw
(x4)
#A12930
1-1/8" screw
(x36)
#A21110
nail
(x4)
#A89210
door pad
10 11
12b
12c
12d
13
123456
789
(x1)
#A84050
safety bracket kit
(x4)
#A44145
adjustable foot
(x2)
#A50395
handle
(x6)
#A65700
hinge
12
12a

7
systembuild.com
STEP1
Tube
You
(x8)
#A22610
Detach the hinge plate from the hinge arm. Attach the hinge plates to the "A" and "B" panels as shown.
13
hinge arm
brazo de la bisagra
bras de charnière
hinge plate
placa de la bisagra
plaque de charnière
13
13
2
213
(x6)
#A65700
2
2
2
2
2
2
2
Press rear button on hinge
to release hinge plate.

8
systembuild.com
STEP2
Tube
You
1
12a
12b
(x8)
#A22620
(x1)
#A84050
Proper orientation of CAM LOCK
Tip
Assembly
Quick
C
E
1
1
1
1
12a
12b
Do not fully tighten this
screw in this step.

9
systembuild.com
STEP3
Tube
You
11
34
Unscrew the two piece foot as shown. After top part of foot is attached to
bottom shelf, screw on bottom part of foot. Be sure all four feet are level
with each other.
(x8)
#A12420
(x4)
#A12930
(x4)
#A44145
34
11
3
D

10
systembuild.com
STEP4
Tube
You
UNLOCKLOCK
* raw edges are shaded
A
B
C
E

11
systembuild.com
STEP5
Tube
You
* raw edges are shaded
(x4)
#A13410
6
6
6
C
E
A
B
D
6

12
systembuild.com
STEP6
Tube
You
(x36)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
7
H
7
Flush the edge of the back panel with the
bottom edge of the bottom shelf. Align
squarely and nail straight through into back
edges.
Assure that the unit is square.
Distance from corner to corner must
be equal as shown.
product collapse, and/or serious injury.
Por favor asegúrese que las Parte de atrás se atan
firmemente. Todos los clavos deben manejarse en las
partes recto y deben apretarse firmemente. El fracaso para
hacer para que podría causar inestabilidad, derrumbamiento
del producto, y/o la lesión seria.
S’il-vous-plaît assurez-vous que les PANNEAUX
ARRIÈRES sont attachés solidement. Tous les clous
doivent être enfoncés perpendiculairement et solidement
dans les parties. Sinon le meuble peut devenir instable,
s’effondrer subitement et/ou causer des blessures graves.
tightened firmly. Failure to do so could cause instability,
All nails must be driven into the parts straight and
Please make sure that the Backs are attached securely.
ADVERTENCIA
AVERTISSEMENT
WARNING
raw surface
superficie cruda
surface crue

13
systembuild.com
STEP7
Tube
You
12c
12d
(x1)
#A84050
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
12d
12c
Option 2
Opción 2
L'option 2
Option 1
Opción 1
L'option 1
Option 1;
Securely screw (12c) into solid area of the
wall as shown.
Option 2:
Drill a 3/16" diameter hole (5mm) in the
wallboard. Tap the wall anchor(12d) into
the hole until it is flush. Fasten the wall
bracket (12a) to the wall anchor (12d) with
the screw (12c).

14
systembuild.com
STEP8
Tube
You
8
8
8
8
8
8
8
8
8
F
F
F
(x12)
#A80250

15
systembuild.com
STEP9
Tube
You
G
13
13
x2
(x6)
#A65700

16
systembuild.com
STEP10
Tube
You
10
5
(x4)
#A17400
(x2)
#A50395
G
hinge arm
brazo de la bisagra
bras de charnière
2nd
hinge plate
placa de la bisagra
plaque de charnière
1st
hook
gancho
crochet
Assistance of another person is advised in attaching the doors.
10
5
5
Repeat this step for installing the second door.
x2

17
systembuild.com
STEP11
Tube
You
9
9
9
(x4)
#A89210
Position the rubber bumpers (9) on the edge of the top (C) and shelf (F) behind the doors (G).

18
systembuild.com
STEP12
Tube
You
B
A
C
A
Loosen screw C
Adjust door.
Tighten screw C
*side view
Suelte el tornillo C
Acomode la puerta.
Ajuste el tornillo C
*la vista lateral
Défaites le vis C
Ajustez la porte.
Serrez le vis C
*le côté envisagent
Loosen screw C
Turn screw B to
move door.
Tighten screw C
Suelte el tornillo C
Dé vuelta el tornillo B
para mover la puerta.
Ajuste el tornillo C
Défaites le vis C
Le vis du tour B
déplacer la porte.
Serrez le vis C
Loosen screw A
Adjust door.
Tighten screw A
Suelte el tornillo A
Acomode la puerta.
Ajuste el tornillo A
Défaites le vis A
Ajustez la porte.
Serrez le vis A
hinge cover
bisagra de la cubierta
couvre-charnière
Door Adjustment
Ajuste de la Puerta
Réglage de la Porte

19
systembuild.com
Tube
You
Maximum Loads
Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is
not approved for use with a television.
Certificate of Conformity
1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South
Wright City, MO 63390
636-745-3351
4. Site of Manufacture: Tiffin OH
5. See front page of instruction manual for date of manufacture.
This unit has been designed to support the maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse, and/or serious injury.
0 lbs.
0 kg.
40 lbs.
18.1 kg.
35 lbs.
15.8 kg.
35 lbs.
15.8 kg.
50 lbs.
22.7 kg.

20
systembuild.com
Register your product to receive the following:
* New trend details - sneak peek on what's new
* Surveys - have a voice within our community
* Exclusive deals and discount codes
* Quick and easy replacement part service
To register your product, visit systembuild.com
Visit your local retailer's website, rate your purchased
product and leave us some feedback!
We would like to extend a big "Thank You" to all of
our customers for taking the time to assemble this
Systembuild product, and to give us your valuable
feedback.
Tube
You