System Build 6004015COM User manual

6004015COM
Bench
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B346004015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
Press CAM BOLT into hole.
Press parts together so CAM BOLT inserts
into edge hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Press CAM LOCK into hole.
End hole
Arrow to point towards end
hole in edge of part.

4
systembuild.com
Before You Start
Quick
Tip
Assembly
Tube
You
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
36004015010 Right Panel
36004015020
Left Partition
36004015030
Top
36004015060 Bottom
36004015070
Back Panel
K600401500
ABCD
E
FG
H
Right Partition
36004015040
Center Partition
36004015050
door (x2)
36004015080
I
This piece is paperboard construction.It
is not made from wood, but is required
for the assembly of your unit.

6
systembuild.com
Board Identification
Not actual size
Tube
You
I
B
G
C
E
A
H
D
F
H

7
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
(x10)
#A22710
cam bolt
(x10)
#A22700
cam lock
(x10)
#A21670
wood dowel
(x10)
#A23030
confirmat screw
(x10)
#A12420
5/8" screw
(x5)
#A12930
1-1/8" screw
(x30)
#A21110
nail
(x5)
#A44140
foot
12
34
9
5
6
(x4)
#A17400
7/8" bolt
7
(x2)
#A52395
handle
8
10 11
(x4)
#A65615
hinge

8
systembuild.com
STEP1
Tube
You
13
(x4) (x4)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
1
1
3
A
B
1
1
3
3

9
systembuild.com
STEP2
Tube
You
13
3
1
1
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x4)
(x4)
C
D
3
3
1
1

10
systembuild.com
STEP3
Tube
You
1
3
13
(x2)
(x2)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
3
E

11
systembuild.com
STEP4
Tube
You
4
4
4
4
4
4
4
4
4
4
4
(x10)
A
C
E
D
B
G
finished edges face up

12
systembuild.com
STEP5
Tube
You
2
(x10)
2
F
2
2
2
2
2
2
2
2
2

13
systembuild.com
STEP6
Tube
You
UNLOCKLOCK
F
finished edges face up
A
C
E
D
B

14
systembuild.com
STEP7
Tube
You
6
5
9
(x5)
(x10) (x5)
9
9
5
5
6
G
Carefully turn your unit on its top.

15
systembuild.com
STEP8
Tube
You
(x30)
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
Flush bottom edge of the back
panel with the bottom edge of
bottom (G).
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
8
8
I
B
G

16
systembuild.com
STEP9
Tube
You
7
10 11
(x4)
(x4) (x2)
7
7
11
11
10
x2
H

17
systembuild.com
STEP10
Tube
You
C
D
H
H

18
systembuild.com
STEP11
Tube
You
Door Adjustment
To adjust the vertical height:
Loosen the screws "A" on both hinges.
They are usually in slotted holes which
allows you to adjust up or down by a
few mm. Then tighten back up.
To adjust the depth:
Loosen the screw "B" and adjust door.
To adjust side to side:
Loosen the screw "C" on BOTH
hinges and tighten "B" moves
door outward. Loosen "B" and
tighten "C" moves doors inward.
A
B
AC

19
systembuild.com
Tube
You
Maximum Loads
Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is
not approved for use with a television.
Certificate of Conformity
1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South
Wright City, MO 63390
636-745-3351
4. Site of Manufacture: Tiffin OH
5. See front page of instruction manual for date of manufacture.
This unit has been designed to support the maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse, and/or serious injury.
20 lbs
9.1 kg
20 lbs
9.1 kg
250 lbs
113.4 kg

20
systembuild.com
Register your product to receive the following:
* New trend details - sneak peek on what's new
* Surveys - have a voice within our community
* Exclusive deals and discount codes
* Quick and easy replacement part service
To register your product, visit systembuild.com
Visit your local retailer's website, rate your purchased
product and leave us some feedback!
We would like to extend a big "Thank You" to all of
our customers for taking the time to assemble this
Systembuild product, and to give us your valuable
feedback.
Tube
You