Systembuild Evolution 8964412COM User manual

8964412COM
Storage Cabinet
B348964412COM0
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
1
34
2

4
systembuild.com
Tube
You

5
systembuild.com
Board Identification
Not actual size
Tube
You
This piece is
paperboard
construction. It is not
made from wood, but
is required for the
assembly of your unit.
Left Panel
31117412010 Right Panel
31117412020
shelf (2)
31117412030
Bottom
31117412040
Adjustable shelf (2)
37362412060
Door (4)
38964412070
Drawer Side (2)
39991167346200C
Drawer Back
39991167051390B
Drawer Front
34632412080
Drawer Bottom
39991341052210D
Back Panel
K111741200
AB
C
D
F
DWR
SIDE
DWR
BACK
S
G
H
DWR
BTM

6
systembuild.com
Board Identification
Not actual size
Tube
You
A
B
C
D
F
S
DWR
SIDE
DWR
BACK
H
G
DWR
SIDE
F
C
G
G
G
This piece is paperboard construction. It
is not made from wood, but is required
for the assembly of your unit.
DWR
BTM

7
systembuild.com
Part List
Actual Size
Tube
You
(x8)
#A22610
cam bolt
(x8)
#A22620
cam lock
(x8)
#A21660
wood dowel
(x10)
#A11080
7/16" flat
head screw
(x10)
#A12120
7/16" round
head screw
(x2)
#A11160
5/8" flat
head screw
(x8)
#A12420
5/8" round
head screw
(x4)
#A12930
1-1/8" round
head screw
(x2)
#A89020
bumper
(x4)
#A23030
confirmat screw
(x42)
#A21110
nail
(x4)
#A21970
drive fastener
(x8)
#A17400
8-32 x 7/8"
(x8)
#A80250
shelf support
(x1)
#A84050
safety bracket kit
2
13
7
6
9
14
13
4
11
10
8
5
17a
17b
17d
(x2)
#A89210
bumper
16
17
17c
(x2)
#A17200
8-32 x 1/2"
15
12

8
systembuild.com
Part List
Not Actual Size
20
21
19
22
23b
23a
23c
23d
(x5)
#A52395
handle
(x8)
#A65615
hinge
(x1)
#A54900
drawer brace
(x2)
#A54520
drawer bracket
(x4)
#A44140
foot
left cabinet member
right cabinet member
left drawer member
(x1)
#A56770
drawer slide kit
right drawer member
23
18

9
systembuild.com
STEP1
Tube
You
27
23a
(x4) (x3)
left cabinet member
(x1)
marked with "L"
2
A
23a
7
finished edge
marked with "L"
2
22
7
7
7

10
systembuild.com
STEP2
27
(x4) (x3) (x1)
marked with "R"
right cabinet member
finished edge
marked with "R"
B
7
23b
23b
2
2
2
2
7
7
7

11
systembuild.com
STEP3
13
17b
17a
(x8) (x8) (x1)
17a
17b
3
3
3
3
C
C
Do not tighten screw.
3
3
3
3
1
1
1
1
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
1

12
systembuild.com
STEP4
914
13
11 22
(x8)
(x2) (x4) (x2) (x4)
9
11
13
14 14
22
D
D
top surface
bottom surface
22
Unscrew the
two halves of
the foot.
Attach
bottom half to
bottom (D) and
screw top half
back on.
finished edge
22
22
22

13
systembuild.com
STEP5
C
C
A
All finished edges will face up.
Cam locks (1) on top surface.
UNLOCKLOCK

14
systembuild.com
STEP6
All finished edges will face up.
C
A
C
B
UNLOCKLOCK

15
systembuild.com
STEP7
All finished edges will face up.
4
(x4)
4
B
A
D
44
4

16
systembuild.com
STEP8
IMPORTANT! THE BACK PANEL IS A STRUCTURAL
PART OF THIS UNIT AND MUST BE INSTALLED
PROPERLY.
(x42)
With the help of another person, turn your unit over on its front side as shown. Position the back
panel as shown. Align squarely with all outer edge. Assure that your unit is square. Distance from
corner to corner must be equal as shown. Attach the back panel as shown nailing straight into
the raw edges.
Assure that your unit is square. Distance
from corner to corner must be equal as
shown.
Flush the bottom edge of the back panel
with the bottom edge of the bottom (D).
"raw surface shown"
S
12
12

17
systembuild.com
STEP9
6
(x4)
21
(x2)
DWR
SIDE
DWR
SIDE
6
21 21
66
6

18
systembuild.com
STEP10
6
(x4)
6
DWR
SIDE
DWR
SIDE
H
6
Be sure the groove in the drawer sides are centered with the groove in the drawer front
.
6
6

19
systembuild.com
STEP11
STEP 12
DWR
SIDE
H
DWR
SIDE
finished surface
8
(x4)
#A21970
DWR
SIDE
DWR
SIDE
DWR
BACK
You will need to tap the drive fasteners (8) lightly with a hammer
to securely fasten.
8
8
8
8
DWR
BTM

20
systembuild.com
STEP13
7
(x4) (x2) (x1)
left drawer member
right drawer member
(x1)
#A56770
23c
23d
23c
23d
18
DWR
SIDE
DWR
BACK
DWR
SIDE
H
Note: Attach slides (23c&23d) first then attach handle.
15
7
7
7
7
15
15
18