Systembuild Evolution 7296500COM User manual

7296500COM
Storage Cart
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B347296500COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
Press CAM BOLT into hole.
Press parts together so CAM BOLT inserts
into edge hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Press CAM LOCK into hole.
End hole
Arrow to point towards end
hole in edge of part.

4
systembuild.com
Before You Start
Quick
Tip
Assembly
Tube
You
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
37296015010
Right Panel
34976015020
Upper Drawer Front
34976015070
Top
34976320030
Bottom
37296015040
ABC
DE
G
Back
34976015050
H
I
Drawer Side (x2)
39993120346200C
Drawer Back
39993120060790B
Drawer Bottom
39993341061810D
DWR
BTM
DWR
BACK
DWR
SIDE
Left Door
37296015080 Right Door
37296015090
Adjustable Shelf
37296015100
J

6
systembuild.com
Board Identification
Not actual size
Tube
You
B
C
E
A
H
D
I
J
G
DWR
BACK
DWR
SIDE
DWR
BTM
DWR
SIDE

7
systembuild.com
Part List
Actual Size
Tube
You
(x8)
#A22710
cam bolt
(x8)
#A22700
cam lock
(x8)
#A21670
wood dowel
(x4)
#A23030
confirmat screw
12
3
5
7
(x4)
#A80250
shelf support
(x26)
#A12120
7/16" screw
10
(x10)
#A11080
7/16" screw
(x4)
#A21970
drive fastener
4
(x2)
#A11170
5/8" screw
(x2)
#A89020
plastic stop
6
11
8
9
(x2)
#A54510
drawer bracket

8
systembuild.com
Tube
You
Part List
Not Actual Size
13
13b
left cabinet member
right cabinet member
left drawer member
right drawer member
(x1)
drawer slide kit
#A56760
13a
13c
13d
(x1)
#A54900
drawer brace
(x2)
#A42720
caster
(x2)
#A42730
locking caster
16
15
14
(x4)
#A65640
hinge
12

9
systembuild.com
STEP1
Tube
You
2
(x2)
2
A
8
(x3) (x1)
13a MARKED WITH "L"
Proper orientation of CAM LOCK
Tip
Assembly
Quick
13
(x2)
(x2)
1
3
2
13a
1
8
8
8
8
3

10
systembuild.com
STEP2
Tube
You
(x1)
2
13b
MARKED WITH "R"
1238
(x2) (x2) (x2)
(x3)
3
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
13b
3
1
2
B
8
8
8
8