Syvio HD Media Player 200A User manual
1
Table of contents
Preliminary remarks
Packing list .2
Precautions
HDD installation guide .4
Back panel connectionguide
Remote control instruction
Operating &setting up
Technicalspecifications
Trouble shooting guide
..................................................................2
.............................................................................
.............................................................................3
.............................................................
...................................................5
Front panel overview...............................................................6
........................................................7
..............................................................9
...........................................................23
..............................................................24
INSTRUCTION
23
Preliminary remarks
Thank you for purchasing the SYVIO 200A.Please read this manual before operation
SYVIO 200A.Store the manual in a safety, easily accessible place for future reference.
Packing list
Please check thecontents of SYVIO200A packageand confirm thatall the itemslisted
below are included.
1.Adapter(Output DC12V/3A)......1pc
2.Remote control........................1pc
3.SYVIO 200A.............................1pc
4.Bracket................................... 2pcs
5.User manual............................1pc
6.HDMI cable.............................1pc
7.Battary(1.5v/AAA)................... 2pcs
8.Screw.....................................8pcs
Precautions
In this instructionmanual,''Warning'''and''Caution''are defined as follows.
Warning:Misuse may potentiallycause injury to
the user orphysical damage to the objects involved
Caution:Missue may potentiallycause death or
serious injury tothe user.
For your ownsafety,be sure to comply with these precautions.
Place station
1.Do notplace wet station
2.Do notplace quivery station
3.Do notstack
Note:
1.Do notturn off directly for protecting HDD
2.Please unplug all the connectorif SYVIO 200Adoes not work for a long time
3.Do notuse cauterant to clean SYVIO 200A
INSTRUCTION
4
HDD installation guide
The SYVIO 200A's salelist does not includeHDD,the user gets itand installs HDD forthe NMT
functions.The SYVIO 200Asupports SATA HDD andits installation guide asbelow.
1)Fix bracket for thehard disk
2)Undo the bottom screwof the player andpull the top coverboard of the player
3)Put the hard diskinto the player andfix screw
4)Shut the top coverboard of the playerand fix the bottomscrew
Note:Please turn off theplayer and unplug allthe connector before installinghard disk.
Connect to HDMI port of your LCD/PDP HDTV set
HDMI CABLE
TV
YPbPr Cable
CVBS/LR
S-video
Output
Output
Output
TV
Amplifier
Coaxial Output
USB Slave Connection
PC
Router
Network Connection
Adapter
Power 5
INSTRUCTION
Back panel connectionguide
Installation of 2.5 HDD
Installation of 3.5 HDD
1
2
3
4
5
6
7
8
1--Reset button Press to resetyour unit
2--Host usb port Connect USB storagedevice
3--IR receiver
4--Power LED:this ledis light whenthe unit hasbeen turned on
5--STB LED:this ledis light whenthe unit ison the standbymode
6--ACT:thisled is lightwhen the unitis connected toLAN
7--USB slave LED:thisled is lightwhen the unitis connected toPC.
8--HDD LED:this ledis light whenthe hard diskof the unitis working
Front pannel overview
Remote control instruction
INSTRUCTION
67
HIGH DEFINITION CITY
BT
DELETE
CAPS
NUM
0-9
Power:press to turnon the unitor off
FIFLE MODE:displays fileand folder
customization
SETUP:jumps to thesetup menu screen
During video playblack,thiskey allows
customization of thedisplay output
SUSPEND:this key isreserved for
future use
PAGE UP:movesup a pageon a list
of media files.Increasesthe volume
media playback
PAGE DOWN:movesdown a pageon
a list ofmedia files.Decreanses the
volume during mediaplayback
TV MODE:Quick accesskey to set
a TV outputresolution.
MUTE:mutes the audiooutput
USB DVDROM EJECT:eject an
attached extenal DVDROMdrive
or a mediaplayback
DELETE:to erase alphanumeric
values during input
Toswitch between capitalized,
numeric and non-capitalized
letters during alphanumeric
value input
Alphanumeric keypad:allows user
to input alphanumericcharacters.
8
INSTRUCTION
Make sure theHDD has been installed to the SYVIO 200A and then turnon the SYVIO200A ,the logo of nmt
installation guide isdisplayed.If you do not want to use the function of NMT, please cancel it.
There are twomethods of the NMT installation,as bellow:
The first method:InstallNMT from the U disk,you maydownload the installationfile from
(http://www.syvio.com.cn/syvio/nmt/updnmt.htm) andcopy to the U disk.
Following figure1 2 3 4 5shows the steps:
*How to installNMT's software to the SYVIO 200A?
Operating &setting up
Home
Preferences
Audio/video
Network
Network share
NMTApplications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Notavailable
Check for firmware update
Reset to factory settings
NMT setup wizard
Figure1
9
INTER
A
A
Return:renturns to theprev-
menu screen
Source:press to themedia
source screen
INFO:press to displaythe
current info offile
ENTER:select the currently
highlighted selection orplays
the highlighted mediafiles
Directional keypad:allows
you to navigateand high
lighted options
HOME:press to returnto the
media filters menuscreen
TIME SEEK:Allows youto
time-seek the currentmedia
file
ZOOM:press to zoomthe
screen when the photoand
media file playback
Menu:jumps to menu
screen when playback
PREV:Skips backwardto
the prev-file
PLAY:Pressto play the
selected media file
NEXT:skipsforward to
the next file
TITLE:opens the text
input box forURL input
REV:rewinds thecurrent
playback
AUDIO:Press to switch
the audio mode
REN key:jumps tothe
video filter
BLUE KEY:Jumpsto the
other media filter
GREEN KEY:jumpsto the
music filter
Yellowkey:jumps to the
photo media filter
STOP:Stop the currentplayback
and return tothe menu screen
FWD:press to controlthe playback
speed
Repeat:repeat the currentmedia
file
Angle:Switch the cameraor viewing
angle during playback
Pause pause the currentthe media
playback
Slow:Slows down thecurrent media
playback
SUBTITLE:turn on thesubtitles and
toggles when playback
// NMT setup wizard
[Warning]
"Typcial setup will install t he NMTAppllications
Without removing your media files,
If this is your de sired option,press[next] to continue.
Next Cancel
Back
// NMTse tup wizard
Next Cancel
Back
// NMTse tup wizard
Setting
Pleasewaiting
Downloadingimage...
Please choose the NMT setup source
online
USB
10 11
INSTRUCTION
Figure2
Figure4
This setup process will install the following
Networked Media Tank(NMT) Applications
[Samba Server]
[Torrent Server]
[UPnPAVServer]
[mylHome Server]
Typical setup(Install NMT Applicatiopns without removing media contents)
Fresh setup(Reformats hard drive and installs NMT Applicatio ns)
// NMT Setup wizard
Figure3
Figure5
The second method:Install NMT online
Following figure6 7 8 9 10shows the steps:
1-3/3
Home
Preferences
Vidoe/audio
Network
Network share
NMT applications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Not available
Checkfor firmware update
ResetTo fActory setting
NMTsetup wizard
Figure6 Figure7
Figure8 Figure9
This setup process will install the following
Networked Media Tank(NMT) Applications
[Samba Server]
[Torrent Server]
[UPnPAVServer]
[mylHome Server]
Typical setup(Install NMT Applicatiopns without removing media contents)
Fresh setup(Reformats hard drive and installs NMT Applicatio ns)
Next
Cancel
// NMT Setup wizard
// NMT seyu ptwizard
[Warning]
"Typcial setup will install the NMT Appllications
Without removing your media files,
If this is your de sired option,press[next] to continue.
Next CancelBack
// NMTse tup wizard
Next CancelBack
Please choose the NMT setup source
nline
USB
INSTRUCTION
Figure10
12
13
The SYVIO 200Aallows the userto update
firmware for supportingthe future media
containers,codecs and features.thereare
two methods ofupdate firmware.as bellow:
The first method:Updatefirmware from U
disk,you may download
from(http://www.syvio.com.cn/syvio/firmw
are/update.html) and copyto U disk.
Figure11 12 13
shows the installationsteps:
Media source
Web server
Setup
//DARD-DISK
*How to update the firmware of the SYVIO 200A?
Figure11
//USB_DRIVE A-1
Media source
Web services
Setup
01 usbupdate.html
1-1/1
Figure12 Figure13
The second method:Updatefirmware online, figure14 15 shows the steps:
Figure14 Figure15
// NMTse tup wizard
Setting
Pleasewaiting
Downloading image...
Home
Preferences
Audio/video
Network
Network share
NMTApplications
Maintenance
Firmware version :50-17-080813-CMI-402-000
Kernel version :14-CMI
NMT version :50-17-080813-CMI-402
Cardea license :Notavailable
Checkfor firmware update
Resetto factory settings
NMTsetup wizard
//Firmware updating
Writing kernel 15%
15
INSTRUCTION
Quick TV modesettiing
For quick settingsof the output video mode, please use the "TV Mode" key on the remote control,
following with oneof the numeric keys, as below:
TV Mode +0 = Auto TV mode
TV Mode +1 = Component/Composite NTSC 480i
TV Mode +2 = Component/Composite PAL 576i
TV Mode +3 = reserved
TV Mode +4 = Component 720p60
TV Mode +5 = Component 1080i60
TV Mode +6 = Component 1080p60
TV Mode +7 = HDMI 720p60
TV Mode +8 = HDMI 1080i60
TV Mode +9 = HDMI 1080p60
TV Mode +CAPS/NUM = Toggles between 50Hzand 60Hz
Media Source
This page isused to select which source you
want to streamcontent from. If a hard drive
is connected itwill show as the first item on
the list.
Web Services
This page givesyou access to Internet
based services likethe internal radio,
Media Service Portal(MSP),BitTorrent
client status displayand customizeable
URL's for yourmost frequently visited sites .
14
16 17
INSTRUCTION
Setup
This page allowsyou to configure various
settings for yourdevice:
Home - Takes you backto the Media Source
page, or thelast server you logged into.
Preferences - General settingsfor the device
like languages, subtitlelanguages,photo
transition effects, lockingthe Setup pages,
etc.
Audio / Video- Digital/Analogue Video output settings aswell as aspectratio control and
digital/analogue audio outputsettings.
Network - Displays currentIP information and allows configuration of network and timezone
settings.
Network Share - Configure yourremote SMB and NFS shared folders here.
NMT Applications - Configure theNMT media servers run state, SMB workgroup, device name
and also theunified password which applies to both SMB and FTP access. Torrent settings
allows the configurationof the BitTorrent client.
Maintenance - Displays thecurrent device firmware version and options for firmware update
and NMT morphing
How to setup network share?
You can choose to browse the availableSMB shares ona Samba network. NFS shares will have
to be enteredmanually.URL format for the network share paths:
SMB - smb://<ipaddress>/dir
NFS - nfs://<ipaddress>:/dir (note the extra colon after IP address)
- nfs-tcp://<ip address>:/dir(NFS using TCP protocol instead ofUDP)
18 19
INSTRUCTION
*NAS (SMB server)
This server allowsa remote PC to access the locally installed HDD on the NMTas a SMB
share.
Usage Instructions:
1. Click onStart->Run
2. Type"\\<NMT Hostname>" or"\\<NMT IP ADDRESS>" intothe text box
3. To allow foreasier accesses to your NMT NASin future, you can choose to map the SMB
share as adrive under your "My Computer" folder of your PC. Todo this:
a) Type"\\<NMT Hostname>" or"\\<NMT IP ADDRESS>" intothe text box.Alternatively you
can go to"My Network Places", click on "Viewworkgroup computers", browseand select your
NMT device.
b) Right clickon the shared folder and select "Map Network Drive
How to setup NMT?
* UPnPAV Server
A standardUPnP AV server for streaming media directlyfrom the NMT's HDD. The server
name will bedisplayed as '<hostname>: UPnP AV Server'.
Usage Instructions:
- Under Setup->MediaServer, you can see the current status of the media server.
A runningserver will be detectable and accessible by all UPnPAV or DLNA compliant DMP
- You can alsoaccess this serverfrom a PC by going to the following link from a webbrowser :
http://<NMT IP Address>:8088/
* FTP Server
Allows easy remoteaccess and management of the NMT's HDD. The serveris always running
by default afterinstalling the NMT applications.
Usage Instructions:
- The FTPserver runs onthe default port (21). So just point your FTPclient to <NMT IP
Address>
Username: ftpuser
Password: 1234 (default)
Note: FTP usernameis not configurable, but the passwordcan be configuredand is shared
with the SMBserver.
c)Select the driveyou want your NMT
shared folders tobe represented.
20 21
INSTRUCTION
This server allowsa remote PC to access the locally installed HDD on the NMTas a NFS share.
Usage Instructions:
The path tothe NFS server on NMT is <NMT IP ADDRESS>:/share
*NAS (NFS server)
d) The mapped drive shouldappear in "My Computer".
- SMB defaults:
Username: nmt
Password: 1234
* Torrent
A BitTorrent client fordirect download tothe internal HDD.
Usage Instructions:
- Torrents can bemanaged by either clicking the Web Services->Torrentlinks from theNMT,or
using a webbrowser on your PC and going to the following URL :http://<NMT IP
ADDRESS>:8883/torrent/bt.cgi or followTorrent links from
http://<NMT IPADDRESS>:8088
- Alternatively, for WindowsXP, you can goto Start->My Network Places->NetworkTasks.
Select the 'ShowIcons for networked UPnP devices' option. The NMT willshow up with it's
hostname. Double clickingon the icon will
bring you toa page that will allow you to select the Torrentoption.
- Youcan upload torrent files and control the
torrent download settingsfrom this page.
- Torrent files are started automatically
whenever the NMTbrowser encounters a
.torrent file.
You canalso load .torrentfile from USB storage
devices.
- Youcan also configure some client settings
from the Setup->Torrent page onthe NMT.
22 23
INSTRUCTION
How to operateusb slave function?
This only appliesto some models which ship with a USB-PC connector, whichallows
connection of theNMT to the PC and the HDD on the NMT will appearas a USB HDD
to the PC.
1. Power upNMT unit, plug in the provided cable between the USB-PC connector to aUSB
slot on yourPC.
2. When theunit is idle or in Browser mode, it will immediately switch the internal HDD to make
it visible tothe PC as a USB HDD.
3. During thisperiod, the NMT can still function as a basic DMA, all NMTapplications will be
stopped at thispoint, however.
4. Note thatas the HDD on the NMT is formatted as a EXT3 partitionby default, you will need
a special driverto support EXT3 on Windows PCs. Linux PCs will be able to support it without
additional drivers.A suggested driver is
EXT2FSD.
5. Aftercompleting your file operation on the USB HDD from your Windows PC, it is advised
to"Safely Remove Hardware"by clicking on the USB icon in the Windows taskbar before
unplugging the USBconnection. Otherwise, a power cycle is required to get the internal
HDD back intonormal operation.
6. When notusing the USB slave function, it is advised not to leave the cable plugged in.
'' ''
'' ''
Technical specifications
Operating system: Linux
Network agreement: TCP/UDP DHCP FTP/TFTP SMB NFS HTML
Safe agreement:SSL2.0/3.0
File system:EXT3
Processor: Sigma Designs(SMP8635)
Memory:DDR400 (32MB*4)
Flashrom:256Mb
Hard disk:SATA interface
Support video format:
DIVX XVID VC-1 TP TS WMV WMV9 MPG DAT M2TS VOB AVI MOV MP4 MKV
Support audio format MPEG AUDIO PLAYER1&2 WMA OGG AAC AC-3 DTS FLAC WAV
Support picture format:JPEG GIF Bitmap PNG
Video output interface:S-video x 1 ;composite x1;Component x 1 ; HDMI(1.3a) x1 (up to 1080P)
Audio output interface:Stereo x 1 ;SPDIF Coaxial x 1 Optic x 1
Data interface:USB2.0 Slave x 1 ;USB2.0 Host x 2 ;WIFI802.11N;Ethernet10/100M
Power DC+12V/3A
24
Troubleshooting guide
For further assistance,pleasecontact SYVIO distributor in your country,
or below supportcontact from CMI:
Tel:+86755-83458820
E-mail [email protected]
QUESTON Solution
Power LED isnot light
No picture
No audio output
RC does notwork
Not connect internet
Check that powercable have been connected safely.
Check the videoresolution to comply TV
Be sure thatthe audio device supports related audio code
Be sure thatthe battery have been installed rightly
Be sure thatthe IP is available,the level of singal is enough.
Table of contents
