T1V Hub User manual

WIRELESS SCREEN SHARING

ADDITIONAL
RESOURCES
Visit t1v.com/support
for network
requirements, product
demos, user guides,
videos, and more.
INSTALLATION
T1V SUPPORT | +1.877.310.8971 | [e-mail]
wirelessly share devices for
streamlined communication
Connect the display to power.
Connect the T1V Hub appliance to power and network outlets.
Part I: Get Everything Plugged In
Enter the AirConnect key.
Enter the Password.
Laptop + Tablet Users, Download AirConnect at t1v.com/AirConnect. Mobile
Users, Download the AirConnect App on the App Store (iOS) or Google Play
Store (Android).
Once Connected, select ‘Share’ to mirror your device.
Use AirConnect whether connecting in-room or remotely to view the shared
Hub display.
Part II: Download AirConnect
NOTE:
If you are configuring multiple Hubs, please contact T1V Support to help
you get set up (it will go a lot faster).
Connect the T1V Hub to the display with HDMI cable. Look for the Hub
signal on screen. If no signal appears, see troubleshooting section.

T1V SUPPORT | +1.877.310.8971 | [e-mail]
Network
Outlet
Power
Outlet
HDMI
T1V Hub Appliance (Back)
DISPLAY
NETWORK
POWER
HDMI 1
HDMI
Display
DISPLAY

t1v.com
© 2020 T1V, Inc. All Rights Reserved
5025 West W.T. Harris Boulevard, Charlotte, North Carolina 28269
T1V’s proprietary software is covered by multiple patents and patents pending including US Patents 8,522,153, 8,583,491, and 8,600,816.
[e-mail]
+1.877.310.8971
T1V SUPPORT
TROUBLESHOOTING
1.
2.
3.
The display shows a blank black screen,
static, or ‘no signal.’
Verify that the display is connected to a
power source and is turned on.
Verify that the appliance is properly
connected to the display.
Use the display remote or settings
buttons to set the input to the
correct HDMI input.
5. Unplug the display from the power
source. Wait 15 seconds, then
reconnect to the power source.
4. Plug in a keyboard to the Hub appliance,
and press the Ctrl+R keys to cycle
through different display resolutions.
6. If steps 1-5 do not resolve the issue, call
or email T1V Support.
1.
2.
3.
The display shows ‘the software is
in hibernation.’
Reseat the HDMI.
Turn off the Hub appliance. Wait 30
seconds, then press the power
button to turn it back on.
Unplug the display from the power
source. Wait 15 seconds, then
reconnect to the power source.
4. If steps 1-3 do not resolve the issue, call
or email T1V Support.