Tabletop Scenics KROMLECH ORC BOOMKILLA DEFFSTOMPER BODY Instructions for use

PAGE 1 / 21 ORC BOOMKILLA DEFFSTOMPER BODY CONSTRUCTION GUIDE
ORC BOOMKILLA DEFFSTOMPER BODY
Ostrzeżenie!
Ten produkt nie jest zabawką. W opakowaniu znajdują się małe elementy nieprzeznaczone dla dzie-
ci poniżej 14 roku życia. Części modelu zostały wycięte i wygrawerowane na płytach pilśniowych.
Nie powinno się wycinać ich z ramek wcześniej niż będą potrzebne do złożenia. Wszystkie części są
niepomalowane. Klej i farby nie stanowią części zestawu. Zawartość może się różnić od tej pokazanej
na pudełku. Do przygotowania modeli i ich złożenia rekomendujemy klej i narzędzia rmy Kromlech.
Produkt przeznaczony dla doświadczonych modelarzy.
Warning!
This product is not a toy. Package contains small parts not suitable for children under 14 years.
All parts are cut from high density breboard. Do not cut the parts from the frames until you are
instructed to do so. Supplied unpainted. Glue or paints not included. Contents may vary from those
shown. We recommend using Kromlech Super Glue and Kromlech Tools to prepare and assemble
HDF terrain. Our products are intended for experienced modellers and may require trimming, cutting
and tting.
0-3
14+
WARNING!
Choking hazard!
Not suitable for
children under
36 months.
Made by
Ofcial Online Store: bitsofwar.com
Full Range of Our Products: tabletopscenics.com
KRTS148
Made in Poland
5908291070601

PAGE 2 / 21ORC BOOMKILLA DEFFSTOMPER BODY CONSTRUCTION GUIDE
1A 2B1A 2B
EXPLANATION OF SYMBOLS
THANK YOU
FOR PURCHASING ONE OF OUR HIGH-QUALITY PRODUCTS!
This guide will run you through the basic techniques and methods required to prepare, clean up and assemble HDF model.
If you have any queries or problems, don’t hesitate to contact us and our Support Team.
FIND US:
tabletopscenics tabletopscenics
MAIL WEBSTORE WEBSITE
[email protected] www.bitsofwar.com www.tabletopscenics.com
TScenics
SAFETY FIRST
Tools used in preparation of a HDF model require additional attention when used. Make sure to work with good quality instruments.
Sharp blades and clippers’ cutting bit require less force to operate - when putting too much strength in cutting, the blade may break or
slide and cause serious injury. Breathing mask is recommended when using les, sandpaper, or modelling saw to avoid inhaling the dust.
KROMLECH DOES NOT TAKE RESPONSIBILITY FOR IMPROPER USE OF TOOLS AND ACCIDENTS DURING THE ASSEMBLY PROCESS.
ASSEMBLING HDF STRUCTURES
1. Before assembling your model please read through all the instructions carefully.
2. Prepare all the tools needed for the job. Modelling knife is required to safely remove the parts from the frame - do not push them out force-
fully as they can be easily damaged.
3. Remove only the parts required for the instruction step you are currently in. After the removal, it is recommended to sand the tabs and
possible roughnesses left after cutting from the frame.
4. For gluing the parts together use cyanoacrylate glue or PVA. PVA glue gives more time for altering the position of the elements, while cy-
anoacrylate allows for a faster assembly. Always remember to dry t beforehand, to check if all joints t correctly.
5. Before painting the model, undercoat it with acrylic spray paint to protect the model from absorbing the water when using water-soluble
paints. Give it plenty time to dry. Afterwards, you can basecoat the model with your standard hobby paints.

PAGE 3 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
0605
03 04
0201

PAGE 4 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
1211
09 10
0807

PAGE 5 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
13 14
1615
17 18

PAGE 6 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
19 20
2221
23 24

PAGE 7 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
25 26
2827
29 30

PAGE 8 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
31 32
3433
35 36

PAGE 9 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
37 38
4039
41 42

PAGE 10 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
43 44
4645
47 48

PAGE 11 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
49 50
5251
53 54

PAGE 12 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
55 56
5857
59 60

PAGE 13 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
61 62
6463
65 66

PAGE 14 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
67 68
7069
71 72

PAGE 15 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
73 74
7675
77 78

PAGE 16 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
79 80
8281
83 84

PAGE 17 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
85 86
8887
89 90

PAGE 18 / 21ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
91 92
9493
95 96

PAGE 19 / 21 ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
97 98
10099
101 102

ORC BOOMKILLA DEFFSTOMPER BODY
CONSTRUCTION GUIDE
PAGE 20 / 21
104
103