Tabletop Scenics ORC SMACK BAR User manual

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 1 / 7
KROMLECH
SUPER GLUE
KROMLECH
HEAVY DUTY KNIFE
KROMLECH
SUPER GLUE
ACTIVATOR
KROMLECH
PVA GLUE
KROMLECH
CUTTING MAT
!1 2
+
DRY TEST GLUE DON’T GLUE PAY
ATTENTION
CUT/TRIM
WITH CARE EXTRA PART CONSTUCTION ORDER
EXPLANATION OF SYMBOLS
RECOMMENDED ACCESSORIES
NOTE: These instructions are available online at:
http://www.tabletopscenics.com/EN-H19/download.html
Before assembling your model kit please read through the instructions carefully.
Next, prepare all the tools needed for the job. Modelling knife is required to remove the parts
safely from the frame. Do not remove the parts from the frame by pushing them forcefully
– some parts are fragile and can be easily damaged. After the removal, it is recommended to
sand the tabs and possible roughnesses left after cutting from the frame.
Please remember to always cut away from your body and fingers!
For gluing use PVA or cyanoacrylate glue. Always remember to dry fit before gluing to check if
all joints fit correctly. Cyanoacrylate glue allows for a faster assembly, however gives you less
time for possible corrections. PVA glue is slower, but will give you more time for altering
the position of the elements.
Before painting the model, undercoat it with matt acrylic spray paint to protect wood from
absorbing the water from your water-soluble paints. Matt acrylic car primer will do. Give it
plenty of time to dry. Afterwards, you can base coat your model with your standard hobby paints.
We would like to express our gratitude for your purchase and encourage to check many other
fantastic constructions from this series. If you are looking for an interesting wargames terrain
created with great attention to detail and production (guaranteed by Kromlech company) check
our web store: www.bitsofwar.com
Kromlech sells Heavy Duty Modelling Knife, PVA Glue, Superglue, Superglue Activator,
and cutting mat, but does not recommend to use these products by children under 16 years old
without adult supervision.
ORC SMACK BAR ASSEMBLY INSTRUCTION

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 2 / 7
@
@
@
@
@
@
65
43
21

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 3 / 7
@
@
@
@
@
@
1211
109
87

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 4 / 7
@
@
@
@
@
@
17 18
15 16
13 14

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 5 / 7
@
@
@
@
@
@
2423
2221
2019

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 6 / 7
@ @
2625

ORC SMACK BAR CONSTRUCTION GUIDE
PAGE 7 / 7
FINISHED BUILDING