Tadano GR-800EX User manual

SPEC. SHEETNO.GR-800E-2-00102/EX-04
CRANE SPECIFICATIONS
CRANE CAPACITY 80,000 kg at 3.0 m
BOOM 5-section, 12.0 m - 47.0 m
DIMENSION
Overall length approx. 14,375 mm
Overall width approx. 3,315 mm
Overall height approx. 3,795 mm
MASS
Gross vehicle mass approx. 51,410 kg
- front axle approx. 24,325 kg
- rear axle approx. 27,085 kg
PERFORMANCE
Max. travelling speed computed 36 km/h
Gradeability(tan ) computed 94 % (at stall)
GENERAL DATA
HYDRAULIC ROUGH TERRAIN CRANE
Left hand steering
*Machine should be operated within the limit of engine crankcase
design (17˚ : MITSUBISHI 6M60-TL)
*30 %
GR-800EX
ELEVATION
By a double-acting hydraulic cylinder, fitted with a holding valve.
Automatic speed reduction and slow stop function.
Boom angle…………………… -1.5˚ to 80.5˚
Boom raising speed...........….. 20˚ to 60˚ in 46s
HOIST - Main winch
Variable speed type with grooved drum driven by hydraulic
axial piston motor through winch speed reducer. Power load
lowering and hoisting.
Equipped with automatic brake (neutral brake) and
counterbalance valve.
Controlled independently of auxiliary winch.
Single line pull ..................64.7 kN {6,600 kgf}
Single line speed(High)....149 m/min (at the 4th layer)
Single line speed(Low) ....107 m/min (at the 4th layer)
Wire rope..........................No-spin type
Diameter x length .............19 mm x 250 m
HOOK BLOCK(Optional) - 80 t capacity
7 sheaves, swivel type hook with safety latch.
HOOK BLOCK(Optional) - 50 t capacity
5 sheaves, swivel type hook with safety latch.
HOOK BLOCK(Optional) - 35 t capacity
3 sheaves, swivel type hook with safety latch.
MODEL
GR-800EX
CAPACITY
80,000 kg at 3.0 m
BOOM
5-section full power partially synchronized telescoping boom of
round box construction with 6 sheaves at boom head.
The synchronization system consists of 2 telescope cylinders,
extension cables and retraction cables.
Hydraulic cylinders fitted with holding valves.
Fully retracted length ......................12.0 m
Fully extended length .....................47.0 m
Extension speed .............................35.0 m in 160 s
JIB
2-staged swingaround boom extension.
Triple offset (3.5˚/25˚/45˚) type.
Stows alongside base boom section.
Assistant cylinders for mounting and stowing.
Single sheave at jib head.
Length.............................................10.1 m and 17.7 m
SINGLE TOP (AUXILIARY BOOM SHEAVE)
Single sheave. Mounted to main boom head for single line work.

CRANE SPECIFICATIONS
- 2 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
HOIST - Auxiliary winch
Variable speed type with grooved drum driven by hydraulic
axial piston motor through winch speed reducer. Power load
lowering and hoisting.
Equipped with automatic brake (neutral brake) and counter-
balance valve.
Controlled independently of main winch.
Single line pull ....................64.7 kN {6,600 kgf}
Single line speed(High)......149 m/min (at the 4th layer)
Single line speed(Low).......107 m/min (at the 4th layer)
Wire rope............................No-spin type
Diameter x length ...............19 mm x 139 m
HOOK BLOCK - 6.6 t capacity
Swivel hook with safety latch for single line use.
SWING
Hydraulic axial piston motor driven through planetary
speed reducer. Continuous 360˚ full circle swing on ball
bearing slew ring. Equipped with manually locked/released
swing brake.
Swing speed................1.5 min
-1
{rpm}
HYDRAULIC SYSTEM
Pumps..................2 variable piston pumps for telescoping,
elevating and winches.
Tandem gear pump for steering, swing and
optional equipment.
Control valves......Multiple valves actuated by pilot pressure
with integral pressure relief valves.
Circuit...................Equipped with air cooled type oil cooler.
Oil pressure appears on AML display for
main circuit.
Hydraulic oil tank capacity......
approx. 840 liters
Filters...................Return line filter
CRANE CONTROL
By 4 control levers for swing, boom hoist, main winch, boom
telescoping or auxiliary winch with 2 control pedals for boom
hoist and boom telescoping based on ISO standard layout.
Control lever stands can change neutral positions and tilt for
easy access to cab.
CAB
Both crane and drive operations can be performed from one
cab mounted on rotating superstructure. One sided one-man
type, steel construction with sliding door access and tinted
safety glass windows opening at side. Door window is powered
control.
Operator's 3 way adjustable seat with headrest and armrest.
Hot water cab heater and air conditioning.
TADANO Automatic Moment Limiter (AML) (Model:AML-C)
Main unit in crane cab gives audible and visual warning of
approach to overload. Automatically cuts out crane motions
before overload.
With working range (load radius and/or boom angle and/or tip
height and/or swing range) limit function.
Automatic Speed Reduction and Soft Stop function on boom
elevation and swing.
Following functions are displayed.
Load as percentage
Number of parts of line of rope
Boom angle
Boom length
Load radius
Outriggers position
On-tire indicator
Actual hook load
Permissible load
Boom position indicator
Potential hook height
Swing angle
Main hydraulic oil pressure
Jib length and jib offset angle (only when jib operation)
OUTRIGGERS
Hydraulically operated H-type outriggers. Each outrigger
controlled simultaneously or independently from the cab.
Equipped with sight level gauge. Floats mounted integrally
with the jacks retract to within vehicle width.
All cylinders fitted with pilot check valves.
Crane operation with different extended length of each outrigger.
Equipped with extension width detector for each outrigger.
Extended width
Fully .............…..….......… 7,300 mm
Middle ............…..…......… 6,700 mm
Middle ............…..…..…… 5,500 mm
Minimum .............…..….... 2,700 mm
Float size (diameter) ......... 600 mm
COUNTERWEIGHT
Integral with swing frame (containing weight with auxiliary
winch and wirerope)
Mass................................. 9,980 kg
NOTE : Each crane motion speed is based on unladen conditions.

CARRIER SPECIFICATIONS
- 3 -
STANDARD EQUIPMENT
Automatic Moment Limiter (AML)
External lamp (AML)
Pendant type over-winding cutout
Winch automatic fail-safe brake
Cable follower
6.6 t capacity hook block (swivel hook)
Hook safety latch
Pilot check valves
Holding valves
Counterbalance valves
Hydraulic pressure relief valves
Swing brake
Swing lock
Boom angle indicator
Boom elevation foot pedal
Boom telescoping foot pedal
Outrigger extension width detector
Air conditioner (hot water heater and cooler)
Sight level gauge
Hydraulic oil cooler
Electric windshield wiper and washer
Roof window wiper and washer
Power window (cab door)
Tachometer/Speedometer
3 way adjustable cloth seat with seat belt, headrest and armrest
Cab floor mat
Sun visor (front and roof)
EQUIPMENT
SPEC. SHEETNO. GR-800E-2-00102/EX-04
Automatic drive system
Transmission neutral position engine start
Overshift prevention
Parking braked travel warning
Tilt-telescope steering wheel
Emergency steering
Back-up alarm
Air cleaner dust indicator
Air dryer
Water separator with filter
Engine over-run alarm
Hydraulic lockout suspension
Non-spin differential (rear)
Towing eyes - front and rear
Telematics(machine data logging and monitoring system) with
HELLO-NET via internet (availability depends on countries).
Eco mode system
Winch drum rotation indicator (audible and visual type)
Winch drum mirror
Fuel consumption monitor
Positive control
2-speed hoist
Eco mode system
OPTIONAL EQUIPMENT
80 t capacity hook block (7 sheaves)
50 t capacity hook block (5 sheaves)
35 t capacity hook block (3 sheaves)
Over-unwinding prevention
Tire inflation kit
TYPE
Rear engine, left-hand steering, driving axle 2-way selected
type (by manual switch).
4 x 2 front drive
4 x 4 front and rear drive
FRAME
High-tensile steel, all welded mono-box construction.
ENGINE
Model....... MITSUBISHI 6M60-TL
Type.........4 cycle, turbo charged and after cooled, 6 cylinder
in line, direct injection, water cooled diesel engine.
Piston displacement ....7,545 cm
3
Bore x stroke ...............118 mm x 115 mm
Max. output..................
200 kW at 2,600 min
-1
{rpm}
Max. torque .................785 N-m at 1,400 min
-1
{rpm}
TRANSMISSION
Electronically controlled full automatic transmission.
Torque converter driving full powershift with driving axle selector.
6 forward and 2 reverse speeds.
3 speeds - High range - 2 wheel drive ; 4 wheel drive
3 speeds - Low range - 4 wheel drive
AXLES
Front ......Full floating type, steering and driving axle with planetary
reduction.
Rear.......Full floating type, steering and driving axle with planetary
reduction.
Non-spin differential.
STEERING
Hydraulic power steering controlled by steering wheel.
Four steering modes available:
2-wheel front
2-wheel rear
4-wheel coordinated
4-wheel crab
SUSPENSION
Front ........Rigid mounted to the frame.
Rear..........Pivot mounted with hydraulic lockout cylinders.
BRAKE SYSTEM
Service ....Air over hydraulic disc brakes on all 4 wheels.
Parking / Emergency.....
Spring applied-air released brake acting on input
shaft of front axle.
Auxiliary....Electro-pneumatic operated exhaust brake.
ELECTRIC SYSTEM
24 V DC. 2 batteries of 12 V - 120 Ah capacity.
FUEL TANK CAPACITY
300 liters
TIRES
Front ....29.5–25 34PR(OR), Single x 2 Air pressure:400 kPa
Rear ....29.5–25 34PR(OR), Single x 2 Air pressure:400 kPa
TURN RADIUS
Min. turning radius (at center of extreme outer tire)
2-wheel steering ........ 11.9 m
4-wheel steering ........ 6.8 m

WORKING RANGE
- 4 -
BOOM
SINGLE TOP
JIB
Approx.
2.3m
NOTE:
Boom Length
12.0m
16.4m
20.8m
29.5m
38.3m
47.0m
Approx.
2.5m
Approx.
2.3m
0.6m
The above lifting height and boom angle are based on a straight (unladen) boom,
and allowance should be made for boom deflection obtained under laden conditions.
The above working range is shown on condition with outriggers fully (7.3m) extended.
SPEC. SHEETNO. GR-800E-2-00102/EX-04
Telescoping mode
LIFTING HEIGHT (m)
RADIUS (m)
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
1
6
.
4
m
B
O
O
M
0 5 10 15 20 25 30 35 40 45 50
4
7
.
0
m
B
O
O
M
+
1
7
.
7
m
J
I
B
4
7
.
0
m
B
O
O
M
+
1
0
.
1
m
J
I
B
4
7
.
0
m
B
O
O
M
3
8
.
3
m
B
O
O
M
2
9
.
5
m
B
O
O
M
2
0
.
8
m
B
O
O
M
1
2
.
0
m
B
O
O
M
80˚
70˚
60˚
58˚
50˚
55˚
40˚
30˚
22˚
20˚
10˚
0˚
45˚
25˚
3.5˚

WORKING RANGE
- 5 -
BOOM
SINGLE TOP
JIB
Approx.
2.3m
NOTE:
Boom Length
12.0m
20.8m
29.5m
38.3m
42.6m
47.0m
Approx.
2.5m
Approx.
2.3m
0.6m
The above lifting height and boom angle are based on a straight (unladen) boom,
and allowance should be made for boom deflection obtained under laden conditions.
The above working range is shown on condition with outriggers fully (7.3m) extended.
SPEC. SHEETNO. GR-800E-2-00102/EX-04
0 5 10 15 20 25 30 35 40 45 50
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
LIFTING HEIGHT (m)
RADIUS (m)
Telescoping mode
4
7
.
0
m
B
O
O
M
+
1
7
.
7
m
J
I
B
4
7
.
0
m
B
O
O
M
+
1
0
.
1
m
J
I
B
4
7
.
0
m
B
O
O
M
3
8
.
3
m
B
O
O
M
4
2
.
6
m
B
O
O
M
2
9
.
5
m
B
O
O
M
2
0
.
8
m
B
O
O
M
1
2
.
0
m
B
O
O
M
80˚
70˚
60˚
58˚
50˚
55˚
40˚
30˚
22˚
20˚
10˚
0˚
45˚
25˚
3.5˚

RATED LIFTING CAPACITIES ISO4305
- 6 -
ON OUTRIGGERS
A
B CCCCCCCCCC
0˚ 22˚
ON OUTRIGGERS FULLY EXTENDED 7.3m SPREAD
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS FULLY EXTENDED
360˚ ROTATION (Unit: ×1000kg)
12.0m 16.4m 20.8m 29.5m 38.3m 42.6m 47.0m
12.0m 16.4m 20.8m 29.5m 38.3m 42.6m
SPEC. SHEETNO. GR-800E-2-00102/EX-04
70
67
64
62
59
56
53
49
46
42
38
27
80.0
74.2
67.0
60.9
55.7
51.1
46.2
42.1
38.6
35.6
33.0
24.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
32.0
34.0
36.0
38.0
40.0
D
75
74
72
70
68
66
64
62
60
58
56
51
46
40
34
13
46.6
46.6
46.6
46.6
46.6
46.6
45.8
41.7
38.3
34.4
31.0
24.9
20.2
16.7
14.0
10.2
79
77
76
75
73
72
70
69
67
66
64
61
58
54
50
42
32
16
40.9
40.9
40.9
40.9
38.9
36.8
34.9
33.2
31.6
30.1
28.1
23.3
19.7
16.3
13.6
9.9
7.3
5.5
78
77
76
74
73
71
70
68
67
65
64
60
57
54
50
42
32
16
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
16.4
12.4
9.8
7.5
79
78
77
76
75
74
73
71
69
67
65
60
55
50
44
38
30
20
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
16.6
14.6
11.2
8.6
6.7
5.3
4.2
3.3
2.5
78
77
76
75
75
74
73
71
69
66
64
60
55
50
44
38
30
20
15.1
15.1
15.1
15.1
15.1
15.1
15.1
15.1
15.0
14.0
13.2
11.7
10.3
8.3
6.9
5.7
4.8
4.0
79
78
78
76
75
74
72
69
65
62
58
54
50
46
41
36
29
22
15.1
15.1
15.1
15.1
14.6
13.8
13.0
11.3
9.1
7.2
5.8
4.7
3.8
3.0
2.4
1.9
1.5
1.1
79
78
78
76
75
73
72
68
65
62
58
54
50
46
41
36
30
22
13.0
13.0
12.8
12.1
11.3
10.7
10.1
9.0
8.1
7.4
6.8
5.9
5.0
4.2
3.6
3.1
2.6
2.2
77
76
75
73
71
68
65
62
59
56
52
48
44
40
35
30
23
12
11.0
11.0
10.7
10.2
9.3
8.5
7.7
6.6
5.4
4.5
3.8
3.1
2.6
2.2
1.8
1.4
1.1
0.9
79
77
76
74
72
69
66
63
60
57
54
50
47
43
39
9.5
9.5
9.5
9.3
8.6
7.5
6.2
5.0
4.1
3.4
2.8
2.2
1.8
1.4
1.1
A
CBBBBBBBBB
7.3m SPREAD 360˚ ROTATION (Unit: ×1000kg)
9.8 20.3 14.1 10.0 18.4 5.2 18.4 7.2 27.2 2.2 27.0 3.7 35.8 0.8 35.0 2.1 40.0 0.9
0˚
100
100
100
100
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
Telescoping conditions(%)
,
Telescoping
Mode
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
,
A: Boom length (m)
B: Load radius (m)
C: Loaded boom angle ( ˚)
D: Minimum boom angle ( ˚) for indicated boom length (no load)

RATED LIFTING CAPACITIES ISO4305
- 7 -
ON OUTRIGGERS
R W R W R W R W R W R W
ON OUTRIGGERS FULLY EXTENDED 7.3m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
47.0m Boom + 10.1m Jib
C
47.0m Boom + 17.7m Jib
C: Loaded boom angle (˚)
R: Load radius(m)
W: Rated lifting capacity(Unit:×1,000kg)
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
10.9
11.8
12.9
14.0
15.1
16.0
18.2
21.2
23.2
26.0
27.8
30.0
31.7
33.9
35.3
37.4
4.9
4.9
4.9
4.9
4.9
4.9
4.8
4.4
4.1
3.8
3.2
2.5
2.1
1.6
1.4
1.0
14.2
15.2
16.4
17.4
18.4
19.3
21.3
24.2
26.0
28.6
30.2
32.4
34.0
35.9
37.2
39.3
4.9
4.7
4.6
4.5
4.4
4.2
4.0
3.8
3.6
3.4
2.9
2.3
2.0
1.5
1.3
1.0
16.7
17.7
18.6
19.5
20.5
21.7
23.5
26.3
28.0
30.5
31.9
33.9
35.2
37.0
38.4
40.2
4.3
4.2
4.1
4.0
3.9
3.9
3.7
3.5
3.4
3.1
2.7
2.2
1.9
1.5
1.2
0.9
12.8
14.1
15.5
16.9
18.1
19.4
21.9
25.6
27.8
30.8
32.7
35.2
36.7
39.2
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.0
2.7
2.3
1.7
1.4
1.0
19.1
20.5
21.7
22.7
24.1
25.2
27.3
30.4
32.4
35.3
36.9
39.3
40.8
43.3
2.9
2.8
2.7
2.7
2.6
2.6
2.5
2.4
2.3
2.2
2.0
1.5
1.3
0.9
23.8
24.7
26.0
27.0
28.0
29.0
30.0
33.8
35.7
38.1
39.6
41.9
43.0
2.3
2.3
2.3
2.3
2.2
2.2
2.2
2.1
2.1
2.0
1.8
1.4
1.2
80
79
78
77
76
75
73
70
68
65
63
60
58
55
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS FULLY EXTENDED 7.3m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
42.6m Boom(telescoping mode II) + 10.1m Jib
C
42.6m Boom(telescoping mode II) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
45
43
40
9.4
10.4
11.3
12.4
13.5
14.5
16.5
19.2
21.1
23.5
25.2
27.5
28.9
31.1
32.5
34.4
35.7
37.5
38.6
40.3
5.3
5.3
5.3
5.3
5.3
5.3
5.2
4.7
4.5
4.1
3.9
3.5
3.1
2.6
2.3
1.9
1.7
1.4
1.2
1.0
13.4
14.3
15.3
16.3
17.2
18.1
19.8
22.5
24.1
26.4
28.0
30.2
31.6
33.6
34.8
36.5
37.7
39.3
40.4
41.9
5.2
5.1
5.0
4.8
4.7
4.6
4.3
4.0
3.9
3.6
3.5
3.2
2.9
2.4
2.1
1.8
1.6
1.3
1.1
0.9
15.6
16.5
17.5
18.3
19.2
19.9
21.6
23.9
25.5
27.6
29.1
31.1
32.4
34.3
35.3
37.0
38.1
39.5
4.6
4.5
4.4
4.3
4.2
4.1
4.0
3.7
3.6
3.4
3.3
3.0
2.7
2.3
2.0
1.7
1.5
1.3
11.5
12.6
13.8
15.1
16.3
17.5
19.6
23.0
25.2
28.1
30.2
32.7
34.3
36.7
38.0
40.2
41.6
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.0
2.9
2.6
2.2
1.8
1.6
1.3
1.1
18.5
19.6
20.4
21.3
22.3
23.3
25.4
28.3
30.1
32.8
34.6
36.9
38.4
40.6
41.7
43.7
45.0
3.0
2.9
2.8
2.8
2.7
2.7
2.6
2.5
2.4
2.3
2.3
2.2
2.0
1.7
1.4
1.2
1.0
22.6
23.4
24.5
25.5
26.4
27.3
28.9
31.5
33.1
35.4
36.9
39.2
40.4
42.2
43.4
45.0
46.0
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.1
2.1
2.0
2.0
1.9
1.6
1.4
1.1
1.0
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS FULLY EXTENDED 7.3m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
38.3m Boom(telescoping mode I) + 10.1m Jib
C
38.3m Boom(telescoping mode I) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
45
43
40
38
8.4
9.3
10.3
11.2
12.1
13.0
14.9
17.4
19.0
21.4
22.8
24.9
26.2
28.0
29.5
31.3
32.5
34.2
35.3
36.8
37.7
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.2
5.9
5.5
4.8
3.9
3.4
2.8
2.5
2.1
1.8
1.5
1.3
1.0
0.9
12.5
13.4
14.1
15.1
15.8
16.6
18.2
20.6
22.1
24.3
25.6
27.3
28.6
30.3
31.5
33.1
34.2
35.7
36.7
38.2
6.4
6.2
6.0
5.9
5.7
5.6
5.4
5.1
4.9
4.7
4.3
3.5
3.1
2.6
2.3
1.9
1.7
1.4
1.2
1.0
14.7
15.5
16.3
17.1
18.0
18.6
20.1
22.3
23.6
25.7
26.9
28.7
29.8
31.5
32.6
34.2
35.1
36.5
4.9
4.8
4.7
4.7
4.6
4.6
4.5
4.4
4.4
4.3
3.9
3.3
2.9
2.5
2.2
1.8
1.6
1.3
10.5
11.6
12.7
13.7
14.8
15.9
18.0
20.8
22.7
25.4
27.3
29.8
31.2
33.5
34.9
37.0
38.3
40.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
3.8
3.6
3.4
3.2
2.8
2.4
2.0
1.7
1.4
1.2
0.9
17.1
18.0
19.0
19.9
20.7
21.7
23.5
26.1
27.8
30.4
31.9
34.2
35.5
37.5
38.6
40.4
41.6
3.2
3.1
3.0
3.0
2.9
2.9
2.8
2.6
2.6
2.5
2.4
2.3
2.1
1.8
1.5
1.2
1.1
20.8
21.7
22.6
23.5
24.4
25.2
26.8
29.1
30.7
32.8
34.2
36.2
37.5
39.2
40.4
41.8
42.7
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.1
2.1
2.1
2.0
2.0
1.7
1.5
1.2
1.0
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
45
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
SPEC. SHEETNO. GR-800E-2-00102/EX-04

RATED LIFTING CAPACITIES ISO4305
- 8 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON OUTRIGGERS
A
B CCCCCCCCCC
0˚ 6˚ 0˚ 23˚ 34˚
ON OUTRIGGERS MID EXTENDED 6.7m SPREAD
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MID EXTENDED
360˚ ROTATION (Unit: ×1000kg)
12.0m 16.4m 20.8m 29.5m 38.3m 42.6m 47.0m
12.0m 16.4m 20.8m 29.5m 38.3m
70
67
65
62
59
55
52
49
46
42
37
27
80.0
72.1
65.0
59.0
53.8
49.3
44.0
40.0
35.5
31.8
27.8
22.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
32.0
34.0
36.0
D
76
74
72
70
68
66
64
62
60
58
55
51
46
40
34
13
46.6
46.6
46.6
46.6
46.6
46.6
43.5
38.0
33.6
30.1
27.1
21.3
17.2
14.2
11.9
8.6
79
77
76
75
73
72
70
69
67
66
64
61
57
54
50
42
32
16
40.9
40.9
40.9
40.9
38.9
36.8
34.5
32.0
30.0
27.3
24.6
20.4
16.8
13.8
11.5
8.2
6.0
4.3
78
77
76
74
73
71
70
68
67
65
64
61
57
54
50
42
32
15
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
16.7
14.2
10.8
8.4
6.7
79
78
77
76
75
74
73
71
69
67
64
60
55
50
44
38
30
20
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
17.0
14.7
12.9
9.6
7.3
5.6
4.3
3.3
2.5
1.9
78
77
76
75
74
74
73
71
69
66
64
60
55
50
44
38
31
20
15.1
15.1
15.1
15.1
15.1
15.1
15.1
15.1
15.0
14.0
13.2
11.3
8.9
7.2
5.9
4.8
4.0
3.4
79
78
78
76
75
73
72
69
65
62
58
54
50
46
41
36
30
15.1
15.1
15.1
15.1
14.6
13.8
12.6
10.0
7.9
6.2
4.9
3.9
3.1
2.4
1.8
1.4
1.0
79
78
78
76
75
73
72
68
65
62
58
54
50
46
41
36
29
21
13.0
13.0
12.8
12.1
11.3
10.7
10.1
9.0
8.1
7.2
6.1
5.1
4.2
3.5
3.0
2.5
2.1
1.7
77
76
75
73
70
68
65
62
59
56
52
48
44
40
35
30
11.0
11.0
10.7
10.2
9.3
8.3
6.9
5.6
4.6
3.8
3.1
2.5
2.0
1.6
1.3
1.0
79
78
77
74
71
69
66
63
60
57
53
50
46
43
9.5
9.5
9.5
9.3
8.0
6.5
5.2
4.2
3.4
2.7
2.1
1.7
1.3
0.9
A
CBBBBBB B
6.7m SPREAD 360˚ ROTATION (Unit: ×1000kg)
9.8 18.0 14.2 8.3 18.5 4.0 18.3 6.5 27.2 1.5 27.2 3.0 35.4 1.6
0˚
100
100
100
100
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
Telescoping conditions(%)
,
Telescoping
Mode
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
,
A: Boom length (m)
B: Load radius (m)
C: Loaded boom angle ( ˚)
D: Minimum boom angle ( ˚) for indicated boom length (no load)

RATED LIFTING CAPACITIES ISO4305
- 9 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON OUTRIGGERS
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 6.7m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
47.0m Boom + 10.1m Jib
C
47.0m Boom + 17.7m Jib
C: Loaded boom angle (˚)
R: Load radius(m)
W: Rated lifting capacity(Unit:×1,000kg)
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
10.8
11.9
13.0
14.1
15.2
16.1
18.3
21.2
23.1
25.7
27.4
29.9
31.4
33.7
35.1
4.9
4.9
4.9
4.9
4.9
4.9
4.8
4.4
3.9
3.0
2.5
1.9
1.6
1.2
0.9
14.3
15.4
16.4
17.6
18.5
19.6
21.5
24.3
26.0
28.2
29.9
32.3
33.8
35.7
4.9
4.7
4.6
4.5
4.4
4.2
4.0
3.8
3.5
2.7
2.3
1.8
1.5
1.1
16.7
17.8
18.8
19.8
20.8
21.9
23.6
26.4
28.0
30.2
31.6
33.8
35.1
37.0
4.3
4.2
4.1
4.0
3.9
3.9
3.7
3.5
3.2
2.5
2.2
1.7
1.4
1.0
12.8
14.1
15.5
16.9
18.1
19.4
21.9
25.6
27.6
30.2
32.3
34.6
36.4
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
2.7
2.0
1.7
1.2
1.0
19.1
20.5
21.6
22.9
24.2
25.4
27.5
30.5
32.5
35.0
36.4
38.9
2.9
2.8
2.7
2.7
2.6
2.6
2.5
2.4
2.3
1.8
1.5
1.1
23.8
24.7
26.1
27.2
28.1
29.2
31.1
33.9
35.7
37.9
39.3
41.4
2.3
2.3
2.3
2.3
2.2
2.2
2.2
2.1
2.1
1.7
1.4
1.0
80
79
78
77
76
75
73
70
68
65
63
60
58
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 6.7m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
42.6m Boom(telescoping mode II) + 10.1m Jib
C
42.6m Boom(telescoping mode II) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
45
9.3
10.4
11.5
12.5
13.6
14.5
16.4
19.2
21.1
23.5
25.1
27.2
28.7
30.7
32.1
34.1
35.4
37.2
5.3
5.3
5.3
5.3
5.3
5.3
5.2
4.7
4.5
4.1
3.7
3.0
2.6
2.1
1.8
1.5
1.3
1.0
13.3
14.3
15.2
16.2
17.2
18.1
19.7
22.3
24.0
26.4
27.9
29.9
31.3
33.2
34.5
36.3
37.4
39.2
5.2
5.1
5.0
4.8
4.7
4.6
4.3
4.0
3.9
3.6
3.3
2.7
2.4
1.9
1.7
1.4
1.2
1.0
15.7
16.5
17.4
18.4
19.1
19.9
21.6
23.9
25.5
27.6
28.9
30.9
32.2
34.0
35.1
36.8
37.9
39.4
4.6
4.5
4.4
4.3
4.2
4.1
4.0
3.7
3.6
3.4
3.1
2.6
2.3
1.9
1.6
1.3
1.2
0.9
11.5
12.7
13.8
15.0
16.1
17.4
19.6
23.0
25.3
28.1
29.8
32.1
33.8
36.2
37.7
39.8
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.0
2.7
2.1
1.8
1.4
1.2
0.9
18.6
19.4
20.4
21.3
22.2
23.3
25.4
28.2
30.3
32.7
34.7
36.5
38.0
40.0
41.4
3.0
2.9
2.8
2.8
2.7
2.7
2.6
2.5
2.4
2.3
2.2
1.8
1.6
1.2
1.1
22.5
23.4
24.4
25.4
26.3
27.2
29.0
31.4
33.1
35.3
36.8
38.8
40.1
42.0
43.1
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.1
2.1
2.0
1.7
1.5
1.2
1.0
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 6.7m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
38.3m Boom(telescoping mode I) + 10.1m Jib
C
38.3m Boom(telescoping mode I) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
48
45
43
8.4
9.3
10.3
11.2
12.2
13.0
14.9
17.4
19.1
21.2
22.6
24.7
26.1
28.0
29.3
31.1
32.3
34.0
35.1
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.2
5.9
4.8
4.2
3.4
2.9
2.4
2.0
1.6
1.4
1.1
0.9
12.5
13.2
14.1
15.0
15.8
16.6
18.2
20.6
22.1
24.0
25.3
27.0
28.3
30.1
31.3
33.0
34.1
35.6
6.4
6.2
6.0
5.9
5.7
5.6
5.4
5.1
4.9
4.1
3.6
2.9
2.5
2.1
1.8
1.5
1.3
1.0
14.7
15.5
16.2
17.1
17.8
18.6
20.0
22.3
23.7
25.6
26.8
28.5
29.7
31.4
32.5
34.1
35.0
36.4
4.9
4.8
4.7
4.7
4.6
4.6
4.5
4.4
4.4
3.8
3.4
2.8
2.4
2.0
1.8
1.4
1.2
1.0
10.5
11.6
12.7
13.7
14.8
15.9
17.8
20.8
22.7
25.6
27.2
29.4
30.9
33.3
34.7
36.8
4.0
4.0
4.0
4.0
4.0
4.0
4.0
3.8
3.6
3.4
3.0
2.3
2.0
1.6
1.3
1.0
17.0
18.1
18.9
19.9
20.8
21.8
23.5
26.2
28.0
30.4
32.1
34.0
35.4
37.3
38.5
3.2
3.1
3.0
3.0
2.9
2.9
2.8
2.6
2.6
2.5
2.4
2.0
1.7
1.4
1.1
20.8
21.7
22.7
23.5
24.4
25.3
26.7
29.3
30.7
32.8
34.4
36.2
38.4
39.1
40.2
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.1
2.1
2.1
1.9
1.6
1.3
1.1
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
50
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt

RATED LIFTING CAPACITIES ISO4305
- 10 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON OUTRIGGERS
A
B CCCCCCCCCC
0˚ 35˚ 0˚ 29˚ 38˚
ON OUTRIGGERS MID EXTENDED 5.5m SPREAD
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MID EXTENDED
360˚ ROTATION (Unit: ×1000kg)
12.0m 16.4m 20.8m 29.5m 38.3m 42.6m 47.0m
12.0m 16.4m 20.8m 29.5m 38.3m
70
67
64
61
58
55
52
49
45
42
38
27
75.4
67.0
60.1
52.8
47.2
40.3
35.0
30.1
25.9
22.6
19.9
15.9
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
32.0
34.0
D
75
74
72
70
68
66
64
62
60
58
55
51
46
40
34
13
46.6
46.6
46.6
46.6
41.1
35.4
30.9
27.3
24.3
21.9
19.4
15.3
12.4
10.2
8.5
5.9
79
77
76
75
73
72
70
69
67
66
64
61
57
54
50
42
32
16
40.9
40.9
40.9
40.9
36.5
31.6
27.8
24.6
22.0
19.8
17.9
14.8
12.0
9.8
8.1
5.5
3.8
2.5
78
77
76
74
73
71
70
68
67
65
64
61
57
54
50
42
32
14
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
18.2
16.7
14.8
12.5
10.6
8.0
6.2
4.8
79
78
77
76
75
74
73
71
69
66
64
60
55
49
44
38
30
18.2
18.2
18.2
18.2
18.2
18.2
17.4
14.8
12.6
10.9
9.5
6.9
5.1
3.7
2.7
1.9
1.3
78
77
76
75
74
74
73
71
69
66
64
59
55
50
44
38
30
20
15.1
15.1
15.1
15.1
15.1
15.1
15.1
15.1
14.6
12.8
11.2
8.5
6.7
5.3
4.2
3.4
2.7
2.2
79
78
78
76
75
73
71
68
65
61
57
54
50
45
15.1
15.1
15.1
14.1
12.2
10.7
9.4
7.4
5.7
4.3
3.3
2.5
1.8
1.3
79
78
78
76
75
73
71
68
65
61
58
54
50
45
40
35
29
20
13.0
13.0
12.8
12.1
11.3
10.7
10.1
8.8
6.9
5.5
4.4
3.6
2.9
2.4
1.9
1.5
1.2
0.9
77
76
75
73
71
68
65
62
59
55
52
48
44
11.0
11.0
10.7
9.9
8.0
6.4
5.0
4.0
3.2
2.5
1.9
1.5
1.1
79
77
76
74
71
68
65
62
59
56
53
9.5
9.5
9.1
7.3
5.9
4.7
3.6
2.8
2.1
1.6
1.1
A
CB B B B B B B
5.5m SPREAD 360˚ ROTATION (Unit: ×1000kg)
9.8 13.0 14.1 5.8 18.5 2.3 18.3 4.6 27.2 0.5 27.1 2.0 35.4 0.4
0˚
100
100
100
100
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
Telescoping conditions(%)
,
Telescoping
Mode
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
,
A: Boom length (m)
B: Load radius (m)
C: Loaded boom angle ( ˚)
D: Minimum boom angle ( ˚) for indicated boom length (no load)

RATED LIFTING CAPACITIES ISO4305
- 11 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON OUTRIGGERS
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 5.5m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
47.0m Boom + 10.1m Jib
C
47.0m Boom + 17.7m Jib
C: Loaded boom angle (˚)
R: Load radius(m)
W: Rated lifting capacity(Unit:×1,000kg)
80
79
78
77
76
75
73
70
68
65
63
60
10.7
11.9
13.0
14.0
15.2
16.3
18.3
21.2
23.2
26.1
27.8
30.1
4.9
4.9
4.9
4.9
4.9
4.9
4.2
3.1
2.5
1.8
1.5
1.0
14.2
15.4
16.5
17.6
18.6
19.5
21.5
24.2
26.1
28.7
30.2
4.9
4.7
4.6
4.5
4.4
4.2
3.5
2.7
2.2
1.6
1.3
16.8
17.8
18.8
19.8
20.8
21.9
23.6
26.4
28.0
30.5
32.0
4.3
4.2
4.1
4.0
3.9
3.9
3.3
2.5
2.1
1.6
1.3
12.8
14.1
15.6
16.9
18.2
19.5
22.2
25.8
27.9
31.2
3.1
3.1
3.1
3.1
3.1
3.1
2.8
2.0
1.6
1.1
19.3
20.5
21.7
22.9
24.0
23.1
27.5
30.7
32.5
35.4
2.9
2.8
2.7
2.7
2.6
2.6
2.3
1.7
1.4
0.9
23.9
24.9
26.0
27.1
28.2
29.1
31.2
33.9
35.8
38.2
2.3
2.3
2.3
2.3
2.2
2.2
2.2
1.6
1.3
0.9
80
79
78
77
76
75
73
70
68
65
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 5.5m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
42.6m Boom(telescoping mode II) + 10.1m Jib
C
42.6m Boom(telescoping mode II) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
9.3
10.4
11.4
12.4
13.6
14.5
16.5
19.2
20.7
23.0
24.5
26.7
28.1
30.3
31.7
5.3
5.3
5.3
5.3
5.3
5.3
5.2
4.5
3.8
3.0
2.5
1.9
1.6
1.2
1.0
13.4
14.3
15.2
16.2
17.2
18.1
19.8
22.3
23.8
26.0
27.3
29.5
30.8
32.8
5.2
5.1
5.0
4.8
4.7
4.6
4.3
3.9
3.3
2.6
2.2
1.7
1.5
1.1
15.7
16.6
17.4
18.3
19.1
20.0
21.6
23.9
25.2
27.2
28.5
30.5
31.8
33.7
4.6
4.5
4.4
4.3
4.2
4.1
4.0
3.6
3.1
2.4
2.1
1.6
1.4
1.1
11.5
12.7
13.9
15.0
16.2
17.5
19.7
23.0
24.7
27.4
29.1
31.6
33.2
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.2
2.6
2.0
1.7
1.3
1.0
18.6
19.6
20.2
21.2
22.3
23.1
25.9
28.2
29.9
32.4
33.8
36.0
3.0
2.9
2.8
2.8
2.7
2.7
2.6
2.5
2.3
1.8
1.5
1.1
22.5
23.5
24.4
25.3
26.3
27.3
29.0
31.5
33.0
35.0
36.4
38.5
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.0
1.5
1.3
1.0
80
79
78
77
76
75
73
70
68
65
63
60
58
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt
R W R W R W R W R W R W
ON OUTRIGGERS MID EXTENDED 5.5m SPREAD
360˚ ROTATION (Unit: ×1000kg)
C
38.3m Boom(telescoping mode I) + 10.1m Jib
C
38.3m Boom(telescoping mode I) + 17.7m Jib
80
79
78
77
76
75
73
70
68
65
63
60
58
55
53
8.4
9.3
10.3
11.2
12.2
13.0
14.8
17.1
18.6
20.8
22.3
24.4
25.8
27.8
28.9
6.6
6.6
6.6
6.6
6.6
6.6
6.3
5.0
4.2
3.3
2.8
2.1
1.8
1.3
1.0
12.5
13.4
14.2
15.0
15.9
16.6
18.3
20.3
21.7
23.6
24.9
26.8
28.1
29.9
31.0
6.4
6.2
6.0
5.9
5.7
5.6
5.4
4.3
3.7
2.9
2.5
1.9
1.6
1.2
1.0
14.7
15.5
16.3
17.1
17.9
18.7
20.1
22.2
23.4
25.3
26.5
28.3
29.5
31.3
32.3
4.9
4.8
4.7
4.7
4.6
4.6
4.5
3.9
3.4
2.7
2.3
1.8
1.5
1.1
0.9
10.5
11.6
12.7
13.8
14.8
15.9
18.0
20.7
22.5
25.0
26.6
28.9
30.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
3.7
3.1
2.4
1.9
1.4
1.1
17.0
18.1
19.0
19.9
20.8
21.8
23.6
26.3
28.0
30.1
31.5
33.7
35.1
3.2
3.1
3.0
3.0
2.9
2.9
2.8
2.6
2.5
1.9
1.6
1.2
1.0
20.8
21.7
22.7
23.6
24.5
25.3
26.9
29.2
30.8
32.8
34.0
35.9
37.1
2.4
2.3
2.3
2.3
2.3
2.3
2.2
2.1
2.1
1.8
1.5
1.1
0.9
80
79
78
77
76
75
73
70
68
65
63
60
58
3.5˚Tilt 25˚Tilt 45˚Tilt 3.5˚Tilt 25˚Tilt 45˚Tilt

RATED LIFTING CAPACITIES ISO4305
- 12 -
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON OUTRIGGERS
A
B CCCCCCCCCC
0˚ 12˚ 42˚ 0˚ 54˚ 43˚ 60˚ 53˚ 58˚ 63˚
ON OUTRIGGERS MIN EXTENDED 2.7m SPREAD
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MIN EXTENDED
360˚ ROTATION (Unit: ×1000kg)
12.0m 16.4m 20.8m 29.5m 38.3m 42.6m 47.0m
70
67
64
61
58
55
52
48
45
42
38
28
33.8
27.7
23.3
19.9
17.2
14.5
12.3
10.6
9.2
8.0
7.0
5.4
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
D
75
74
71
70
68
66
64
62
60
57
55
50
46
40
34
28.9
23.9
20.2
17.3
15.0
13.0
11.5
10.1
8.7
7.5
6.5
4.9
3.7
2.7
1.9
79
78
76
75
73
72
70
68
67
66
64
61
57
54
50
20.9
20.9
17.8
15.3
13.2
11.5
10.1
8.9
7.8
6.9
6.1
4.6
3.3
2.3
1.5
78
77
75
74
73
71
70
68
67
65
63
60
57
53
49
41
32
12
18.2
18.2
18.2
18.2
16.1
14.4
12.9
11.6
10.5
9.6
8.7
7.0
5.7
4.6
3.8
2.5
1.6
0.9
78
77
76
75
74
73
72
70
68
66
63
59
12.7
11.3
10.1
9.0
8.1
7.3
6.6
5.4
4.4
3.6
2.8
1.6
78
77
76
75
74
73
72
70
68
66
63
59
54
49
14.6
13.1
11.9
10.8
9.9
9.1
8.3
7.1
6.1
5.1
4.3
3.0
2.1
1.4
78
77
77
75
74
72
71
67
64
7.8
7.1
6.5
5.4
4.5
3.8
3.1
2.0
1.1
79
78
77
76
74
72
71
68
64
61
57
8.5
8.5
7.8
6.7
5.8
5.0
4.4
3.2
2.3
1.6
1.0
77
76
74
73
70
67
64
5.9
5.1
4.4
3.6
2.5
1.7
1.0
78
76
75
72
69
4.4
3.6
2.9
1.9
1.1
A
CB B
2.7m SPREAD 360˚ ROTATION (Unit: ×1000kg)
12.0ｍ20.8ｍ
9.8 4.0
0˚ 18.3 0.8
100
100
100
100
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
Telescoping conditions(%)
,
Telescoping
Mode
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
,
A: Boom length (m)
B: Load radius (m)
C: Loaded boom angle ( ˚)
D: Minimum boom angle ( ˚) for indicated boom length (no load)
NOTES FOR “ON OUTRIGGERS” TABLE
a
a
a
a
Outriggers extended width 6.7m(middle) 5.5m(middle) 2.7m(minimum)
Angle a
˚ 60 40 10
1. Rated lifting capacities shown in the table are based on condition that crane is set on firm level surface. Those above thick lines are
based on crane strength and those below, on its stability.
2. Rated lifting capacities based on crane stability are according to ISO4305.
3. Rated lifting capacities shown in the table are based on condition that crane is set on firm level surface. Those above thick lines are
based on crane strength and those below, on its stability.
4. The mass of the hook (800 kg for 90.7 t capacity, 540 kg for 60 t capacity, 450 kg for 35 t capacity, 165 kg for 6.6 t capacity), slings
and all similarly used load handling devices must be considered as part of the load and must be deducted from the lifting capacities.
5. For rated lifting capacity of single top, reduce the rated lifting capacities of relevant boom according to a weight reduction for
auxiliary load handling equipment. Capacities of single top shall not exceed 6,600 kg including main boom hook mass and the net
capacity must be so reduced.
6. Standard number of parts of line for each boom length is as shown below. Load per line should not surpass 64.7 kN {6,600 kgf} for
main winch and auxiliary winch.
The lifting capacity data stored in the Automatic Moment Limiter (AML) is based on the standard number of parts of line listed
in the chart.
Maximum lifting capacity is restricted by the number of parts of line of Automatic Moment Limiter (AML).
7. The lifting capacity for over-side area differs depending on the outrigger extension width. Work with the capacity corresponding to
the extension width. The lifting capacities for over-front and over-rear areas are for “outriggers fully extended”. However, the areas
(angle a) differ depending on the outrigger extension width.
Telescoping mode I, II I II I, II I, II
Number of parts of line 14 8 4 4 1
12.0m 12.0m to
20.8m
20.8m to
47.0m
Single top
Jib
Boom length

RATED LIFTING CAPACITIES ISO4305
SPEC. SHEETNO. GR-800E-2-00102/EX-04
ON RUBBER (ON TIRES)
A
B
C C C C C C
0˚ 31˚ 54˚
ON RUBBER STATIONARY (Unit: ×1000kg)
Over Front 360˚ Rotation
12.0m 20.8m 29.5m 12.0m 20.8m 29.5m
12.0m 20.8m 29.5m 12.0m 20.8m 29.5m
67
64
61
58
55
52
49
45
42
38
33
28
28.5
25.3
23.0
20.9
19.0
17.3
15.9
14.7
13.3
12.2
11.0
10.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
26.0
D
70
68
67
65
63
62
60
57
53
50
42
32
13
13.5
13.5
13.5
13.5
12.6
11.7
10.8
9.0
7.6
6.5
4.8
3.5
2.5
74
73
72
71
70
68
66
64
59
54
49
44
37
30
19
10.4
10.4
10.4
10.0
9.8
9.3
8.3
7.2
5.3
4.1
3.2
2.5
1.8
1.2
0.9
64
61
58
55
52
49
45
42
38
33
28
15.5
12.9
10.9
9.3
7.9
6.6
5.6
4.7
3.8
3.3
2.8
70
68
67
65
63
62
60
57
53
50
42
9.0
7.8
6.8
6.0
5.2
4.7
4.2
3.3
2.5
2.0
1.0
73
72
71
70
68
66
63
59
6.8
6.0
5.2
4.6
3.5
2.8
2.2
1.5
A
C
B B B B
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON RUBBER STATIONARY
Over Front 360˚ Rotation
12.0m 20.8m 29.5m 12.0m
9.9 8.5 18.3 2.4 27.2 0.6 9.9 2.0
0
0
66
66
66
0
0
0
0
0
33
33
33
0
66
66
66
0
0
0
0
0
33
33
33
Telescoping conditions(%)
,
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
0
66
66
66
0
0
0
0
0
33
33
33
0
66
66
66
0
0
0
0
0
33
33
33
Telescoping conditions(%)
,
Telescoping
Mode
2nd boom
3rd boom
4th boom
Top boom
,
A: Boom length (m)
B: Load radius (m)
C: Loaded boom angle ( ˚)
D: Minimum boom angle ( ˚) for indicated boom length (no load)
A
B
C C C C C C
0˚ 0˚19˚ 38˚ 54˚
ON RUBBER CREEP (Unit: ×1000kg)
Over Front 360˚ Rotation
65
61
58
55
52
49
45
42
39
33
27
19.0
17.0
15.1
13.6
12.4
11.4
10.3
9.5
8.7
8.0
7.3
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
D
70
68
66
65
64
62
60
57
53
50
42
32
13
13.5
12.3
11.4
10.5
9.7
9.1
8.5
7.3
6.3
5.6
4.2
3.3
2.5
74
73
72
71
70
68
66
64
59
54
49
43
37
30
10.4
10.4
10.0
9.4
8.7
7.7
6.7
6.0
4.7
3.7
2.6
2.0
1.4
1.0
64
62
58
55
52
49
45
42
38
34
28
11.2
9.8
8.5
7.5
6.5
5.4
4.7
3.8
3.1
2.5
2.3
69
68
67
65
63
62
60
57
53
50
7.5
6.5
5.8
5.0
4.3
3.8
3.3
2.5
2.0
1.5
73
72
71
70
69
68
66
59
5.8
5.0
4.3
3.8
3.0
2.5
1.9
1.1
A
C
B B B
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON RUBBER STATIONARY
Over Front 360˚ Rotation
12.0ｍ20.8ｍ12.0ｍ
9.9
6.30
18.3
2.4
9.9
1.6
- 13 -

RATED LIFTING CAPACITIES ISO4305
SPEC. SHEETNO. GR-800E-2-00102/EX-04
NOTES FOR "ON RUBBER" TABLES
1. Rated lifting capacities shown in the table are based on condition that crane is set on firm level surface, with suspension lock
applied. Those above thick lines are based on tire capacity and those below, on crane stability. They are based on actual load
radius increased by tire deformation and boom deflection.
2. Rated lifting capacities based on crane stability are according to ISO4305.
3. The mass of the hook (700 kg for 80t capacity, 500 kg for 50t capacity, 450 kg for 35t capacity, 165 kg for 6.6t capacity), slings and
all similarly used load handling devices must be considered as part of the load and must be deducted from the lifting capacities.
4. For rated lifting capacity of single top, reduce the rated lifting capacities of relevant boom according to weight reductions for
auxiliary load handling equipment. Capacities of single top shall not exceed 6,600 kg including main hook.
5. On rubber lifting with "jib" is not permitted. Maximum permissible boom length is 29.5 m.
6. CREEP is motion for crane not to travel more than 60 m in any 30 minute period and to travel at the speed of less than 1.6 km/h.
7. During "CREEP" duties travel slowly and keep the lifting load as close to the ground as possible, and especially avoid any abrupt
steering, accelerating or braking.
8. Do not operate the crane while carrying the load.
9. Tires should be inflated to their correct air pressure of 400kPa.
10.For CREEP operation, choose the drive mode and proper gear according to the road or working condition.
11.Standard number of parts of line for on rubber operation should be according to the following table.
Load per line should not surpass 64.7 kN {6,600 kgf} for main winch and auxiliary winch.
The lifting capacity data stored in the Automatic Moment Limiter (AML) is based on the standard number of parts of line
listed in the chart.
Maximum lifting capacity is restricted by the number of parts of line of Automatic Moment Limiter (AML).
Boom length
Telescoping mode
Number of parts of line
12.0m
I, II
6
12.0m to 29.5m
II
4
Single top
I, II
1
Over
front
approx.
2˚
360˚
Rear
Without outriggers "Over front" operation should be performed within
2 degrees in front of chassis.
WORKING AREA
- 14 -

DIMENSION
- 15 -
Basic standard machine includes:
5-section boom (12.0 m - 47.0 m)
2-stage jib (10.1 m, 17.7 m)
Mitsubishi 6M60-TL
29.5-25 34PR tires
Single top
6.6 ton hook block
Add:
1. 80t 7 sheaves hook block
2. 50t 5 sheaves hook block
3. 35t 3 sheaves hook block
Remove:
1. 6.6 ton hook block
2. Top jib
3. Base jib
4. Counter weight with auxiliary winch and wire rope
GVW Front Rear
Axle Weight Distribution Chart Unit : kg
SPEC. SHEETNO. GR-800E-2-00102/EX-04
Note: Dimension is with boom angle at -1.5 degree.
51,410
+700
+500
+450
-165
-335
-865
-9,980
24,325
+1,350
+960
+870
-235
-450
-1,705
+4,240
27,085
-650
-460
-420
+70
+115
+840
-14,220
2,502
3,315
8,020 3,950
8,390
3,550 3,780
1,875
2,200
4,190
12,000 ~ 47,000
3,795
2,700 5,500 6,700 7,300
445
12.2˚
15.0˚
14,375
2,405

Specifications are subject to change without notice.
4-12, Kamezawa 2-chome,
Sumida-ku, Tokyo 130-0014, Japan
Te l : 81-(0)3-3621-7750
Fax : [phone]
http://www.tadano.co.jp/indexe.htm
[e-mail]
Printed in Japan
GR-800EX-2012-06-2
E-mail
URL
(International Division)