Taiga Concept LOHKO BOX 5 User manual

LOHKO BOX 5
ASSEMBLY
GUIDE
www.taigaconcept.com
x2
4h

www.taigaconcept.com
Installation
Open the packing carefully not to damage the
product.
Always follow assembly instruction when you
assemble your product.
When moving the glass elements make sure you don’t
place them on hard surfaces as they will break easily.
When assembling the product make sure you can
support the wall element until they are stable.
Taiga Concept recommend to use authorized
installation persons and will not take
responsibility for any harm to persons or goods due to
irresponsible actions.
Product may have some smell after assembling but it
will disappear in few weeks.
Before installation nd out your country re regulation
and contact your local Taiga dealer.
Do not carry out your own modications to the
product, as it will automatically end warranty.
Check building / oor weight capacity before
assembling the products.
Maintenance
After assembling the product, wipe all surfaces with
clean damp cloth. Avoid using too much water, as it
will damage the product. Prolonged direct sunlight
may change the color of wooden surfaces over time.
Check tightness of hinges and door position every six
month.
Choosing location
Always place the product inside the building.
Room temperature needs to be minimum 10°C.
Do not place the product to space that is wet or where
has high humidity.
Place the product so that the minimum space between
roof element and ceiling needs to be at least 10 cm.
Building ceiling height minimum of 230 cm.
When placing the product make sure the door will not
block any walkway and that it does not damage when
open.
Maximum oor deection ≤ 0,7° degree / meter.
Warranty / Contact
Upon successful installation please inform the local
Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been carried out
in contradiction to the installation guide.
It is recommended to use Taiga Concept local dealers
authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga dealer.

Take image of the damaged item
before opening the package for
later documentation, then
continue opening package
If you nd damage please
take images before
opening the package
Check if there is any damage
to the package
Remove top cover and check that
there are no signs of damage before
unpacking.
If you nd damage please take
images before unpacking the product
elements
If you damage elements while carrying,
take images of the damages
If you damage elements
while assembling the product,
take images of damages
Assemble the product
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
If you find damage, document with
photos according instructions
Carry the elements
Note: Take extra care
when carrying glass

1. Take images where you can see
full package from 2 dierent angles
which show the damage
1. Take images where you can see
full package from 2 dierent angles
which show the damage
1. Take images where you can see
the whole element from 2 dierent angles
which show the damage
2. Take closer images of the damage
2. Take closer images of the damage
2. Take closer images of the damage and
check which element / glass is damaged.
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
How to document if you cause damage while carry orassembling the product

1x CF004
1x CF007
1x CR007
1x CR004
1x CR006
1x CG003
2x CG004
3x CG005
4x CA2xx
1x SCA005
Width 700mm
Width 700mm
Width 767mm
1x CF006
1x CW015
1x CW011
1x CW012
2x CW013
1x CW014
Walls
Roofs
GlassAcoustic panel & carpet
Floors
Elements &
Components
1x CD004
1x CD005
2x CD006
4x SR006
2x SR007
1x EP106
Width 2135 mm
Width 2335 mm
Frames & Joints
Cables & control panel
1x EC1xx
500cm
200cm
200cm
100cm
1x EC221
1x EP109
1x EC220

4x SS002
4x SS003
2x SS004
2x SS005
8x SF002
3x SM001
8x SC006 4x SR001
18x SC001 24x SC002
Doorframe &
acoustic panel
Wall connector
plate Hinges
Roof
Roof
4x SF006 60x SR003
16x SC003 4x SC005
1x SF001 1x SF003
Width 2100 mm
Width 700 mm
Width 2280 mm
6,3 x 80
3,5 X 20
4,5 X 30
4,5 X 30
Seals
Screws & Accessories
1x SH00x
Elements &
Components
Screw machine + bits
Gloves Safety glasses Safety shoes Safety helmet
Carpet knife Cleaning tools Protection material
for elements and glasses
Glass suction cup
min weight capacity 50 kg / pcs
2 x
+
Hex key set
Step ladder Rubber hammer
Spirit leveler
Equipments
& tools
Small adjustable
wrench

ATTENTION
Never put glass against hard surface, use always carton or carpet under the glass.
Use always 2 person and suction cups to lift glass
X

SR003
24X
CF007
CF006
CF004

SC006
Warranty / Contact
Upon successful installation please inform the local
Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been carried out
in contradiction to the installation guide.
It is recommended to use Taiga Concept local dealers
authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga dealer.
8X

CW015
x2

x2
CG005
SS002

x2
CW014

SS002
CG005

SR006
SR006

SF006
SC003
2X
CW013
CW013

SR006
SR006

CW011
CW012

x2
SR003
Warning: Do not apply excessive force
24X

CR007
SR007
x2
EC220 EC221

SR001
2X
x2
SR007