Taiga Concept LOHKO BOX 7 User manual

LOHKO BOX 7
ASSEMBLY
GUIDE
www.taigaconcept.com
x2
5h

www.taigaconcept.com
Installation
Open the packing carefully not to damage the
product.
Always follow assembly instruction when you
assemble your product.
When moving the glass elements make sure
you don’t place them on hard surfaces as they
will break easily.
When assembling the product make sure you
can support the wall element until they are
stable.
Taiga Concept recommend to use authorized
installation persons and will not take
responsibility for any harm to persons or
goods due to irresponsible actions.
Product may have some smell after assembling
but it will disappear in few weeks.
Before installation find out your country fire
regulation and contact your local Taiga dealer.
Do not carry out your own modifications to the
product, as it will automatically end warranty.
Check building / floor weight capacity before
assembling the products.
Maintenance
After assembling the product, wipe all surfaces
with clean damp cloth. Avoid using too much
water, as it will damage the product. Prolonged
direct sunlight may change the color of
wooden surfaces over time.
Check tightness of hinges and door position
every six month.
Choosing location
Always place the product inside the building.
Room temperature needs to be minimum 10°C.
Do not place the product to space that is wet
or where has high humidity.
Place the product so that the minimum space
between roof element and ceiling needs to be
at least 10 cm. Building ceiling height minimum
of 230 cm.
When placing the product make sure the door
will not block any walkway and that it does not
damage when open.
Maximum floor deflection ≤ 0,7° degree /
meter.
Warranty / Contact
Upon successful installation please inform the
local Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been
carried out in contradiction to the installation
guide.
It is recommended to use Taiga Concept local
dealers authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga
dealer.

Take image of the damaged item
before opening the package for
later documentation, then
continue opening package
If you find damage please
take images before
opening the package
Check if there is any damage
to the package
Remove top cover and check that
there are no signs of damage before
unpacking.
If you find damage please take
images before unpacking the product
elements
If you damage elements while carrying,
take images of the damages
If you damage elements
while assembling the product,
take images of damages
Assemble the product
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
If you find damage, document with
photos according instructions
Carry the elements
Note: Take extra care
when carrying glass

1. Take images where you can see
full package from 2 different angles
which show the damage
1. Take images where you can see
full package from 2 different angles
which show the damage
1. Take images where you can see
the whole element from 2 different angles
which show the damage
2. Take closer images of the damage
2. Take closer images of the damage
2. Take closer images of the damage and
check which element / glass is damaged.
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
How to document if you cause damage while carry orassembling the product

1x CF004
1x CF007
1x CR007
1x CR004
2x CR006
1x CG003
2x CG004
3x CG005
4x CA2xx
1x SCA007
Width 700mm
Width 700mm
Width 767mm
2x CF006
1x CW020
1x CW016
1x CW017
4x CW018
1x CW019
Walls
Roofs
GlassAcoustic panel & carpet
Floors
Elements &
Components
1x CD004
1x CD005
2x CD006
6x SR006
3x SR007
1x EP106
Width 2135 mm
Width 2335 mm
Frames & Joints
Cables & control panel
1x EC1xx
500cm
200cm
200cm
100cm
1x EC221
1x EP109
1x EC220

4x SS002
4x SS003
2x SS004
2x SS005
8x SF002
3x SM001
12x SC006 4x SR001
24x SC001 24x SC002
Doorframe &
acoustic panel
Wall connector
plate Hinges
Roof
Roof
6x SF006 84x SR003
24x SC003 4x SC005
1x SF001 1x SF003
Width 2100 mm
Width 700 mm
Width 2280 mm
6,3 x 80
3,5 X 20
4,5 X 30
4,5 X 30
Seals
Screws & Accessories
1x SH00x
Elements &
Components
Screw machine + bits
Gloves Safety glasses Safety shoes Safety helmet
Carpet knife Cleaning tools Protection material
for elements and glasses
Glass suction cup
min weight capacity 50 kg / pcs
2 x
+
Hex key set
Step ladder Rubber hammer
Spirit leveler
Equipments
& tools
Small adjustable
wrench

ATTENTION
Never put glass against hard surface, use always carton or carpet under the glass.
Use always 2 person and suction cups to lift glass
X

CF004
CF006
CF006
CF007
SR003
18X

SC006
Warranty / Contact
Upon successful installation please inform the
local Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been
carried out in contradiction to the installation
guide.
It is recommended to use Taiga Concept local
dealers authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga
dealer.
12X

SR003
32X

CW020
x2

CG005
SS002
x2

x2
CW019

SS002
CG005

SR006
SR006

SC008
SC003
SR006
SR006
CW018
CW018
2X

SR006
SR006
CW018
CW018
SC008
2X

SR003
Warning: Do not apply excessive force
24X

SR001
CR007
x2
2X

CW016
CW017