TAKACHI TWH Series User manual
TWH • TWE
■Torque wrench with interchangeable head.
■Suitable for the tightening of cable glands requiring a specic torque.
■Open end interchangeable head (spanner head) TWE series available separately.
■Spanner head is not included.
TWH series
INTERCHANGEABLE HEAD TORQUE WRENCH
Product no. / Details
Product no. Length Torque range (N • m) Increments (N • m)
TWH0.5-5 215 0.5 ~ 5.0 0.05
Notes
The torque wrench is not subject to RoHS regulations.
Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided.
When tightening, proceed rst with a low value (half of the reference) of the recommended torque,
and set the appropriate tightening torque for the cable and mounting part that will be tightened thereafter.
Please read the operation manual (refer to TAKACHI website) before use to ensure correct and safe usage of the product.
■Dedicated open end interchangeable head for TWH series.
■Various interchangeable heads are available to t a range of cable gland sizes.
TWE series
OPEN END INTERCHANGEABLE HEAD
w
Wrench
Size
t
Product no. Wrench size w t
TWE- 8 8 27 6
TWE- 9 9 27 6
TWE-11 11 27 6
TWE-12 12 30 6
TWE-13 13 31 6
TWE-15 15 40 9
TWE-16 16 40 9
TWE-17 17 41 9
TWE-18 18 42 9
TWE-19 19 42 10
TWE-21 21 47 10
Note: These open end head is not subject to RoHS regulations.
Product no. Wrench size w t
TWE-22 22 52 10
TWE-23 23 53 11
TWE-24 24 55 11
TWE-27 27 58 13
TWE-29 29 58 13
TWE-30 30 65 14
TWE-32 32 65 14
TWE-33 33 65 14
TWE-34 34 70 15
TWE-36 36 72 15
Product no. / Details
RM • RMW series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
RM8S-2.5 11.8 TWE-12 – n/a
RM • RMW8L-2.5 11.8 TWE-12 12.6 TWE-13
RM8S-4 11.8 TWE-12 – n/a
RM • RMW8L-4 11.8 TWE-12 12.6 TWE-13
RM • RMW10S-6 13 TWE-13 – n/a
RM • RMW10L-6 13 TWE-13 14.8 TWE-15
RM • RMW12S-7 16 TWE-16 17 TWE-17
RM • RMW12L-7 16 TWE-16 17 TWE-17
RM • RMW16S-8 19 TWE-19 22 TWE-22
RM • RMW16L-8 19 TWE-19 22 TWE-22
RM • RMW20S-12 24 TWE-24 26.2 n/a
RM • RMW20L-12 24 TWE-24 26.2 n/a
RM • RMW25L-17 33 TWE-33 32.6 n/a
RM • RMW32L-21 36 TWE-36 40.3 n/a
RM • RMW40L-27 45.7 n/a 51 n/a
RM • RMW50L-38 60 n/a 61.2 n/a
RM63L-44 68 n/a 73.4 n/a
Note 1) ""n/a"" indicates no suitable spanner head size and torque value available.
Note 2) Dimensions of Cap and Lock nut width are in mm.
Suitable TWE model
AG series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
AG8-3.5 12 TWE-12 – n/a
AG8-5 12 TWE-12 – n/a
AG10-6 15 TWE-15 – n/a
AG12-5 17 TWE-17 17 TWE-17
AG12-6.5 17 TWE-17 17 TWE-17
AG12-8 17 TWE-17 17 TWE-17
AG16-10 21 TWE-21 22 TWE-22
AG20-15 27 TWE-27 27 TWE-27
AG25-16 34 TWE-34 33 TWE-33
AG25-20 34 TWE-34 33 TWE-33
AG32-25.5 41 n/a 42 n/a
AG40-28.5 50 n/a 48 n/a
AG40-33 50 n/a 48 n/a
AG50-37 60 n/a 59 n/a
AG50-42 60 n/a 59 n/a
RPG series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
RPG7-7 16 TWE-16 18.7 TWE-19
RPG9-8 19 TWE-19 21.8 TWE-22
RPG11-10 22 TWE-22 23.7 TWE-24
RPG13.5-11 24 TWE-24 27 TWE-27
RPG16-14 26.7 TWE-27 29.8 TWE-30
RPG21-18 33 n/a 35.8 TWE-36
RPG29-25 42 n/a 45.8 n/a
AGM series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
AGM6-2.5 8 TWE-8 9 TWE- 9
AGM6-3 8 TWE-8 9 TWE- 9
AGM6-3.5 8 TWE-8 9 TWE- 9
AGM8-5 11 TWE-11 11 TWE-11
AGM10-6 13 TWE-13 13 TWE-13
AGM12-8 15 TWE-15 15 TWE-15
AGM16-10.5 18 TWE-18 19 TWE-19
AGM20-15 24 TWE-24 24 TWE-24
AGM25-20 30 TWE-30 30 TWE-30
AGM32-25.5 36 TWE-36 36 TWE-36
AGM40-28.5 46 n/a 51 n/a
AGM40-33 46 n/a 51 n/a
AGM50-37 55 n/a 60 n/a
AGM50-42 55 n/a 60 n/a
RSP series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
RSP12-6 16 TWE-16 17 TWE-17
RSP16-8 19.5 n/a 22 TWE-22
RSP20-11 24 TWE-24 26.2 n/a
RSP25-16 33 TWE-33 32.6 n/a AGE series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
AGE12-5 15 TWE-15 15 TWE-15
AGE12-6.5 15 TWE-15 15 TWE-15
AGE16-10.5 18 TWE-18 19 TWE-19
AGE20-15 24 TWE-24 24 TWE-24
AGE25-20 30 TWE-30 30 TWE-30
AGE32-25 36 n/a 36 n/a
AGH series
Product no. Cap width
Suitable model
Lock nut width
Suitable model
AGH10-6 13 TWE-13 13 TWE-13
AGH12-8 15 TWE-15 15 TWE-15
AGH16-10.5 18 TWE-18 19 TWE-19
AGH20-15 24 TWE-24 24 TWE-24
AGH25-20 30 TWE-30 30 TWE-30
AGH32-25.5 36 TWE-36 36 TWE-36
Cap width
Lock nut
width
Safety Precautions
Please read this manual carefully before use while following operation instructions.
The manufacturer / retailer etc. will not be are not liable for any personal injuries,
damage to the product, or other property damage, etc. caused by improper use.
Warnings
・Do not use beyond the maximum torque value. This may cause damage and injury.
・Do not use the torque wrench as a hammer or lever, or applying strong impact.
・Do not modify or disassemble the torque wrench. These may cause strength or
accuracy problems, which may lead to accidents and injuries.
・Before use, check for damage, cracks, rust, or deformation. These may cause
damage and injury.
・Do not use the torque wrench to loosen nuts or caps as it is a precision
instrument.
・Do not operate the torque wrench with oily or greasy hands. This may cause your
hands to slip while tightening, leading to accidents or injuries.
・Wear safety glasses or other eye protection while using.
・Be careful not to hit your hands or elbows on surrounding objects when working
with a torque wrench.
・Do not use the torque wrench underwater or in the sea.
・When working on elevated platforms, take measures to prevent torque wrenches
from falling.
Cautions
・Set the torque before each use.
・Do not lower the scale below the minimum.
・Do not use it outside of the torque scale range.
・Every time before setting the torque, ensure that the handle lock is in the
unlock position first before rotating the handle.
・Grip the center of the handle to tighten. Gripping the edge of the handle may
cause incorrect torque value.
・Tighten slowly while applying minimal force. Otherwise applied torque value
may be incorrect.
・Stop tightening after hearing, or feeling a clicking sound or sensation. Further
tightening may result in overtorque.
・Do not use parts such as a pipe to extend the handle.
・Do not drop the torque wrench or apply strong impact.
・Do not use in high temperature and humid environments.
・After use, set the torque wrench to the minimum value.
・After use, remove dirt, dust, mud, oil, water, etc. before storing.
・Store in a dry place when not in use for an extended period of time.
1 For Safety Use
TWH0.5-5 Torque Wrench Operation Manual
2 Components
Torque scale Handle center
Head Handle
3 How to use
①Push and hold the ring down to unlock. ②Turn the handle.
・Turn the handle while
the ring is in the unlock
position.
③Adjust to required torque. ④Release the ring.
・The ring will spring
back to its original
(lock) position.
TAKACHI ELECTRONICS ENCLOSURE CO., LTD.
TEL. +81-48-222-5409
https://www.takachi-enclosure.com/ 2023.10
Ring
This manual suits for next models
1
