TANDYPRO 3962-00 User manual

MACHINE SETUP AND USE
1. Slide the machine in the table edge and tighten the
mounting screw (a) on the bottom of the machine
to mount it on the table.
2. Select the roller (b) you need and insert it into the
roller ball mount (c).
3. Use the Allen key to remove the blade holder (d) and
install a blade (e) onto it, then reattach it to the machine.
4. Turn the lifter arm (f) to the right to lift the blade
assembly (g), insert your leather, then turn the lever (f)
to the left to drop the blade assembly (g).
5. Twist the height adjustment screw (h) clockwise to raise
the blade assembly (g) or counterclockwise to lower it.
6. Twist the angle adjustment nut (i) to change the angle
of the blade. Ensure that the blade does not contact roller (b).
7. Grip the leather rmly on both sides of the machine
and pull it through the machine making sure to pull
both sides down.
TANDY TIPS
Replace the blade whenever skiving becomes difcult.
For general skiving the at roller is generally the best option.
Ensure that the blade does not contact the roller bar.
When possible use the guide to ensure an even skive.
(a)
(b)
(c)
(f)
(h) (i)
(g)
(d)
(e)
INSTRUCTIONS
FOR USE
3962-00
TANDYPRO
® SKIVING MACHINE
MACHINE PARTS
(a) Mounting screw
(b) Rollers
(c) Roller ball mount
(d) Blade holder
(e) Replacement blade
(f) Lifter arm
(g) Blade assembly
(h) Height adjustment screw
(i) Angle adjustment nut
Front view
Back view

TANDYPRO® SKIVING MACHINE
WARRANTY INFORMATION
Manufacturer warrants this product to be free from defects in workmanship and materials,
under normal use and conditions, for a period of 6-months from the purchase date.
To request repair or damage support, please e-mail [e-mail] and include the
following information:
1) CUSTOMER ID/ORDER ID/DATE OF PURCHASE
2) MACHINE SERIAL #
3) PICTURES/VIDEO OF THE DEFECT
4) ADDITIONAL NOTES DESCRIBING THE ISSUE
2
Customer Service: 877-LEATHER
www.tandyleather.com
TANDYPRO®
SKIVING MACHINE
SHARP EDGES - USE EXTREME CAUTION!
WARNING: Choking Hazard - small parts. Not for children under 3 years. Sharp edges – Use extreme
caution. Moving parts can crush or cut. Keep hands clear during operation. This product is not intended for
use by children; adult supervision required. Read and understand the enclosed instructions for use before
using this machine. Failure to follow operating instructions could result in serious injury.
CARE AND MAINTAINENCE
Keep machine dry at all times.
SPECIFICATIONS
Dimensions: 8” x 7” x 2.5” (20 x 18 x 6.5 cm)
Weight: 2 lbs (1 kg)