Targus Targus AMB09CA User manual

N2953
QD ID : B012764
410-1690-002A / AMB09CA
User Guide
Manuel de l’utilisateur
SOURIS LASER BLUETOOTH®
CONFORT
1 YEAR LIMITED WARRANTY: We pride ourselves
on the quality of our products. For complete warranty
details and a list of our worldwide offices, please visit
www.targus.com. Features and specifications are
subject to change without notice. Microsoft, Windows
and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries. Mac is a trademark of
Apple Inc., registered in the U.S. and other countries.
Logitech is a registered trademark of Logitech
International in the United States and other countries.
All trademarks and registered trademarks are the
property of their respective owners. ©2009 Targus
Group International, Inc. All rights reserved.
GARANTIE LIMITÉE D’UN AN : Nous sommes fiers
de la qualité de nos produits. Pour les détails complets
sur la garantie et une liste de nos bureaux à travers le
monde, veuillez visiter www.targus.com. Les fonctions
et les spécifications peuvent être modifiées sans
préavis. Microsoft, Windows et Windows Vista sont des
marques déposées ou des marques de commerce de
Microsoft Corporation aux États-Unis et dans d’autres
pays. Mac est une marque déposée d’Apple Inc. aux
États-Unis et dans d’autres pays. Logitech est une
marque déposée de Logitech International aux États-
Unis et dans d’autres pays. Toutes les marques de
commerce et les marques déposées sont la propriété
exclusive de leurs propriétaires respectifs. ©2009
Targus Group International, Inc. Tous droits réservés.
BLUETOOTH®
COMFORT LASER MOUSE

Targus Bluetooth Comfort Laser Mouse
2
Targus Bluetooth Comfort Laser Mouse
3
EN – Introduction
Thank you for your purchase of the Targus Bluetooth Comfort Laser
Mouse.This mouse uses Bluetooth technology which provides a seamless
connection up to 33 feet (10 m) away. This is a plug and play device so no
additional software is required.The advance scroll wheel feature program
can be downloaded from the Targus website.
System Requirements
Hardware
• Bluetooth-enabled computer
Operating System
• Microsoft Windows®2000
• Microsoft Windows®XP
• Microsoft Windows Vista®
• Microsoft Windows®7
• Mac OS®X 10.4 or later
Contents
• Targus Bluetooth Comfort Laser Mouse
• 2 x AA Batteries
• User Guide
1. Remove the battery cover from the top of the mouse by using the notch
on the back. Carefully lift the cover up as shown in the diagram.
Installing the Batteries
2. Remove the battery safety clip by squeezing the center of the clip and
sliding it back, towards the rear of the mouse. Lift up and rotate the clip
out of the way.
NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSITION
BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE.

Targus Bluetooth Comfort Laser Mouse
4
Targus Bluetooth Comfort Laser Mouse
5
3. Slide and lift to remove the battery holder as shown.
4. Insert the two AA batteries, making sure that the positive (+) and
negative (-) ends of each battery match the polarity indicators inside
the battery compartment.
6. Turn on the mouse by pressing the power On/Off button on the bottom
of the mouse. Hold for 3 seconds and then release.
5. Replace the battery safety clip and by sliding it forward until it clicks into
place and then replace the battery cover.
Power button

Targus Bluetooth Comfort Laser Mouse
6
Targus Bluetooth Comfort Laser Mouse
7
Enable Discovery mode:
The mouse will go into pairing mode automatically after it is powered on. The 1st
and 3rd LEDs will flash alternately for 60 seconds; this indicates that the pairing
sequence is in operation. Once the connection is established, the 1st and 3rd LED
lights will light up steadily for 3 seconds.
Power On:
Press and hold the power button for 3 seconds and then release.
The battery life indicator will briefly light up showing the current power level of the
batteries.
Power Off:
Press and hold the power button for 3 seconds and then release.
The battery life indicator will briefly light up and then fade out.
Battery Check:
After the mouse is turned on, quickly press and release the power button. The
battery life indicator will light up showing the current power level of the batteries.
Initial Mouse Setup
If the connection is not established by the end of 60 seconds, the mouse will go
into sleep mode. Click on any mouse button to exit from sleep mode. The pairing
sequence will re-start automatically.
1st LED
3rd LED
Battery Life Indicator
NOTE: WHEN THE FIRST LIGHT IS BLINKING, PLEASE REPLACE THE BATTERIES
3 LEDs lit Full power
2 LEDs lit Half power
1 LED lit Low power
Power Saving mode:
After an extended period of time, if the mouse is not used, it will automatically enter
power saving mode to conserve power and increase battery life. Click on any mouse
button to resume the normal operation. The mouse may take a few seconds to
reconnect with your computer.
Power Management
• To extend the life of your battery, turn off the mouse while travelling or
when you’re not using it.

Targus Bluetooth Comfort Laser Mouse
8
Targus Bluetooth Comfort Laser Mouse
9
Initial Configuration
Before you can begin using your Bluetooth®mouse, you will first need to
perform some initial setup steps.
NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION SCREENS MIGHT VARY
DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE DRIVER.
fi
Connecting with Bluetooth Software:
WIDCOMM or Microsoft (Windows XP & Windows Vista)
1. Go to the Bluetooth Places icon located on your desktop or in the system tray and
double click, then click Add a Bluetooth Device.
(Windows XP) (Windows Vista)
2. The Bluetooth Wizard screen will prompt. Please follow the onscreen instructions.
(Windows Vista)
(Windows XP)

Targus Bluetooth Comfort Laser Mouse
10
Targus Bluetooth Comfort Laser Mouse
11
3. Power on the mouse and it will automactically go into discovery mode. Click Next
to continue pairing and the computer will search for the mouse.
4. The confirmation window will appear after the computer finishes detecting
the Bluetooth devices. Select the Bluetooth Wireless Mouse and click Next to
continue. (There may be one or more different Bluetooth devices detected.) If the
mouse is not detected, please make sure the power is on and in discovery mode.
Press Search Again to re-pair the device.
(Windows Vista)
(Windows XP)
(Windows Vista)
(Windows XP)
5. After selecting the correct device, the computer will finish establishing the
connection. Please wait until the setup is completed.
(Windows Vista)
(Windows XP)

Targus Bluetooth Comfort Laser Mouse
12
Targus Bluetooth Comfort Laser Mouse
13
Connecting with Bluetooth Software:
TOSHIBA (Windows Vista)
1. Double click on the Bluetooth Manager icon in the system tray, and then click
Add New Connection.
2. Power on the mouse and it will automactically go into discovery mode. Click Next
to continue pairing and the computer will search for the mouse.
3. The computer will now search for the Bluetooth mouse and other Bluetooth devices.
Please wait until the search is completed. Choose the device you wish to connect.
There may be more than one Bluetooth device detected. Select Bluetooth Wireless
Mouse and click Next to continue. If the mouse is not detected, please make sure the
mouse is in discovery mode and click Refresh.
4. The computer will begin connecting with the device.

Targus Bluetooth Comfort Laser Mouse
14
Targus Bluetooth Comfort Laser Mouse
15
5. The connection is established and setup is complete. The device is ready to use. If
the connection is not successful, please click Back and search the device again.You
can continue to add other Bluetooth devices or close the window.
Bluetooth Software: Mac
1. Go to the Bluetooth icon located on your desktop or in the system bar and click the
icon to begin setup. Select “Turn Bluetooth On” to activate the Bluetooth function
on your Mac.
2. Scroll down the list and select “Set up Bluetooth Device...”
3.The Bluetooth Setup Assistant will begin. Please follow the on-screen instructions.

Targus Bluetooth Comfort Laser Mouse
16
Targus Bluetooth Comfort Laser Mouse
17
4. Select “mouse” and click continue to proceed with setup. Your mouse will need to be
in “discovery” mode to connect. Power on the mouse and it will automactically go
into discovery mode.
5. Your computer will begin to search for the mouse. Once the mouse is found, it will
show up in the list. Highlight your mouse and press continue.
6. The Bluetooth mouse will now begin pairing. Click continue to proceed.
7. Congratulations.Your Bluetooth mouse is setup and ready to use.You can choose to
setup another device or click Quit to exit setup.

Targus Bluetooth Comfort Laser Mouse
18
Targus Bluetooth Comfort Laser Mouse
19
Troubleshooting
The mouse is not working.
• Make sure that the polarity of the batteries is correct. The positive (+) and
negative (-) ends of each battery must match the positive (+) and negative (-)
connections in the battery housing.
• Make sure the batteries are charged. Recharge or replace if necessary.
• Verify that the computer is Bluetooth enabled.
• Verify that the device drivers are installed:
1. Click Start/ Settings/ Control Panel/ System/ Hardware/ Device Manager
2. Check under “Bluetooth Devices” that a “Soft-Touch Bluetooth” is installed
• Paired devices are always displayed in My Bluetooth Places, even if the mouse is
out of range or not powered up.
Programming Your Mouse
(Windows Only)
Once installation is complete, open the driver software and select the
desired setting for the scroll-wheel button. Close the driver software
application and you’re ready to go. Activate your selected feature by
pressing down on the scroll wheel.
To access the advanced scroll wheel features you will need to download
and install the software driver. This can be downloaded from the following
location:
Visit www.targus.com to download and install the driver.