Taylor-Dunn TC-030-60C User manual

MT-030-60C-C
Use with Model Numbers:
TC-030-60C
Operator’s Manual
The best way to go about your business
Cub Model Number TC-030-60C
Serial Number Range:
Starting: 194055
Ending: See Introduction Chapter
READ THIS MANUAL BEFORE OPERATION OR
PERFORMING MAINTENANCE.
This manual contains important information regarding
the safe operation and maintenance of this vehicle. This
manual shall be kept with the vehicle.
WARNING
Shown with optional features
D

Your satisfaction is our #1 goal. If you have questions
or concerns with your vehicle, please contact your sales
Representative or Service Advisor at your local dealership.
Taylor-Dunn has a worldwide dealer and distribution network
to provide replacement parts and service for our vehicles.
Refer to our web site, www.taylor-dunn.com, for a dealer
lookup application.
Originally Published 12/30/2015
Revision D, 5/1/2018, contents subject to change without notice
Taylor-Dunn®Mfg.
2114 W. Ball Rd.
Anaheim, CA 92804
(800)-688-8680
[phone]
(FAX) [phone]
Visit our Web site: www.taylor-dunn.com
My Vehicle information
Vehicle Serial Number: .
Engine Model Number: .
Engine Serial Number: .
Date Purchased: .
Date Delivered: .
Dealer Purchased From: .
Salesman Name: .

Page 3Tiger CUB Operator Manual
MT-030-60C-C
CONTACT INFORMATION
Service, Parts, Sales:
Taylor-Dunn has a network of dealers distributed around the globe to support our vehicles.
Informationregardingvehiclesales, replacementparts, orservice shouldbe obtainedthrough
your local dealer.
A dealer locator can be found on the Taylor-Dunn website at www.taylor-dunn.com.
If you do not have access to the internet, you can call the factory direct at:
01 [phone]
Feedback regarding this or any Taylor-Dunn manual can be sent to:
Taylor-Dunn Manufacturing
Attn: Tech Writer
2114 West Ball Road
Anaheim, CA 92804

Page 4 Tiger CUB Operator Manual
MT-030-60C-C
The Taylor-Dunn Corporation:
Leading Provider of Commercial & Industrial Vehicles since 1949
Taylor-Dunn Manufacturing:
From the day we shipped our rst vehicle in 1949, we have pursued a singular goal: to build tough,
rugged,dependable vehicles tohelp our customersmove personnel,equipment, and materials.It’s
that simple. For over sixty years, our standard and custom vehicles - Burden Carriers, Personnel
Carriers, Stock Chasers, Electric Carts, Tow Tractors & more - have been the leading solution for
customers in a broad range of industrial, commercial, and ground-support markets.
Decadesof experienceare aninvaluableasset, andit isan assetwecherish andprotect. Ourguiding
principle is to provide application-specic solutions, which are reliable, efcient, and economical.
Ourdomestic and internationalnetwork ofqualityTaylor-DunnDealers and Parts& ServiceSupport
keeps our customers moving.
Tiger Tractor:
Tiger manufacturing has become a leading manufacturer of internal combustion engine industrial
tractorsandgroundsupportequipment. With tractorcapacities ranging from3,000 - 12,000pounds
drawbar pull, they are ideal for industrial applications as well as aircraft ground support.As with all
Taylor-Dunn vehicles;quality, service,support and reliabilityare built intoallTigerTractor products.
Shown below is just a small sample of what Taylor-Dunn has to offer to keep
your business moving:

Page 5Tiger CUB Operator Manual
MT-030-60C-C Table of Contents
Contact Information......................3
The Taylor-Dunn Corporation: ....4
Introduction 7
Who Should Read This Manual............ 7
About This Manual................................ 7
Glossary of Terms...........................8
Conventions ....................................9
Signal Words and Their Denitions: ..... 9
Safety Alert Message ........................... 9
Responsibilities...............................10
Of the Owner........................................ 10
Of the Passengers ............................... 10
Of the Service Personnel... .................. 10
Vehicle Modications .....................11
Replacement Parts .........................12
Using Non-Taylor-Dunn Replacement
Components..................................... 12
About Your Vehicle 13
Licensing Requirements....................... 13
How to Identify Your Vehicle ........14
Data Plate............................................. 14
Where to Find Data Plate and Serial
Number............................................. 14
Taking Delivery 15
If a Problem is Found ....................15
Operator Training 16
Driver Qualications ............................. 16
Vehicle Controls 17
1: Tachometer/Engine Gauge............... 17
2: Fuel Gauge....................................... 17
3: Light Switch...................................... 17
4: Wiper Switch .................................... 17
5: Ignition Switch.................................. 17
6: Transmission Temperature Warning
Light.................................................. 17
7: MIL Light........................................... 17
8: Parking Brake Warning Light............ 17
9: Heater Valve..................................... 17
10: Heater Fan ..................................... 17
Tachometer/Engine Gauge................... 18
1: Throttle Pedal................................... 19
2: Foot Brake Pedal.............................. 19
3: Parking Brake................................... 19
4: Shift Lever........................................ 19
Horn Switch.......................................... 19
Directional Signals................................ 19
Hazard Light Switch ............................. 19
Steering ............................................... 19
Operator Presence Switch ................... 19
Transmission Shift Levers.................... 20
Vehicle Operation 21
General Safety Guidelines ................... 21
Seat Belts (optional)............................. 23
All Seat Belt Types ............................... 24
Combination Lap and Shoulder Belts... 24
Lap Belts Only...................................... 24
Seat Belts While Pregnant ................... 24
Seat Belt Maintenance......................... 24
Starting the Engine............................... 25
Stopping the Engine............................. 26
Jump Starting....................................... 27
Driving.................................................. 28
Towing 30
Draw Bar Pull (DBP), Denition............ 30
Towing the Vehicle................................ 31
Collisions or Accidents ......................... 32
Storing and Returning to
Service 32
Engine Fuel 33
Gasoline............................................... 34
Gasohol................................................ 34
LPG...................................................... 34
Diesel ................................................... 34