TCL 32S525 User manual

1:1
A5
80g双胶纸
白底黑字
基础说明书80120-000315
英语+俄语
包含底插：70-STDD31-EEM1B
俄语部分增加客户要求的内容，以业务确认为准。
制作表编号：HZ2021
物 料 编 号：80120-000577
内 容：说明书
型 号：32S5200
日 期：2021-3-19
BOM编号：Z2S10101001347
ELQ161634M
牌子名称： TCL 32S525
批 次 号：
机 芯：RT41XS-RU
制作人
PREPARED BY
项目/美工 工程师
ENG.CHECKED BY:
市场业务中心确认
CONFIRM BY：
销 往 RUSSIA 地：
：
TCL电子控股有限公司
运营中心-惠州TV工厂-PE部
产品辅助设计室（外销订单）
黄艳霞
Vasya
Liu
数字签名者：Vasya Liu
DN：cn=Vasya Liu, o, ou,
[email protected],
c=CN
日期：2021.03.22
19:46:20 +08'00'
邓
鹏
2021.03.2
4
08:47:17
+08'00'
2021.03.2
4
08:51:06
+08'00'
R1
R1：升级英语P5、P7；俄语
多页内容
消化完库存后更改，同批次
保持一致

32S525

2
Table of Contents
Chapter 1: Introduction
Precautions ...............................................................3
Warning ...................................................................3
Product ....................................................................3
Power and Plug .......................................................3
Power Cord and Signal Cable .................................3
Use Environment .....................................................3
Cleaning ..................................................................3
Sockets ......................................................................4
Remote Control Functions ...................................... 5
Chapter 2: Getting Started
Switching On .............................................................8
Switching Off .............................................................8
Network Connection .................................................9
TV Buttons ...........................................................10
Initial Setup .............................................................10
Chapter 3: Basic TV Operations
Accessing Channels ..............................................11
Watching Connected Devices ...............................11
Adjusting Volume ...................................................11
Accessing Smart TV Homepage ............................11
Accessing TCL Channel ....................................11
Using Advanced System Settings Menu ..........11
Using TV Settings Menu ........................................12
Chapter 4: Using More of Your TV
Installing Channels .................................................13
Common Interface ..................................................13
Using the Common Interface Function ...................13
Accessing Common Interface Services .................13
Using Subtitles ........................................................13
Turning On/Off Subtitles .........................................13
Enabling Subtitle Languages on Digital TV Channels
................................................................................13
Selecting a Subtitle Type on Digital TV Channels ...13
Using Teletext .........................................................14
Selecting Decoding Page Language ......................14
Digital Teletext Language .......................................14
Using Quick Start Function.....................................14
Network Wake Up ................................................14
T-Link .......................................................................14
Enabling or Disabling T-Link ...................................14
Using Auto Power On .............................................14
Using Auto Standby ................................................14
Using EPG (Electronic Programme Guide) ..............14
Bluetooth Function .................................................15
Netix Settings ........................................................15
Password in Parental Control ................................15
Chapter 5: Other Information
Problems & Solutions .............................................16
Troubleshooting .....................................................17
Legal Statement ......................................................18
Mount the Stand .....................................................19

3
IntroductionChapter 1
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Warning
A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
-ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the
television set.
-ALWAYS use furniture that can safely support the
television set.
-ALWAYS ensure the television set is not overhanging
the edge of the supporting furniture.
-ALWAYS educate children about the dangers of
climbing on furniture to reach the television set or its
controls.
-ALWAYS route cords and cables connected to your
television so they cannot be tripped over, pulled or
grabbed.
-NEVER place a television set in an unstable
location.
-NEVER place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to
a suitable support.
-NEVER place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
-NEVER place items that might tempt children to
climb, such as toys and remote controls, on the top
of the television or furniture on which the television
is placed.
If the existing television set is being retained and
relocated, the same considerations as above should be
applied.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
N
This symbol indicates that the fuse may
be in the neutral, and that the mains shall
be disconnected to deenergize the phase
conductors.
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded by a skilled person so as to provide some
protection against voltage surges and built-up static
charges.
Product
• Do not block or cover the ventilation openings on the
back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
carrying parts or short-circuit parts, resulting in re,
electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by
yourself. Refer all servicing to qualied personnel.
• Do not touch the screen surface with ngers as this
may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
Power and Plug
• Unplug the set under the following conditions:
-If the set will not be used for a long period of time.
-If the power cord or the power outlet/plug is
damaged.
-Follow the instructions to install and adjust the
product. Adjust those controls that are covered in
these operating instructions as improper adjustment
of other controls may result in damage. If this
happens, unplug the set and refer to the service
personnel.
-If the set is subject to impact or has been dropped
and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is used
as disconnect device, the disconnect device shall
remain readily operable.
(*Where an all-pole mains switch is used as the
disconnect device, the switch shall remain readily
operable.)
Power Cord and Signal Cable
• Do not allow anything to rest on or roll over the power
cord and the signal cable.
• Protect the power cord and the signal cable from
being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable to
moisture.
Use Environment
• Do not place the set on an unstable cart, stand, or
table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
• Do not expose the set to excessive heat such as direct
sunlight, re, or the like and no naked ame sources,
such as lighted candles, should be placed on the
apparatus.
• Do not expose the set to dripping or splashing and
no objects lled with liquids, such as vases, shall be
placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5°C to 35°C (41°F to 95°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Cleaning
• Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when
cleaning.
• Do not use water or other chemical cleaner to clean
the screen as this may damage the surface of the TV
screen.
All other safety instructions about our TV sets are
also applicable here. (Note: Certain TV model is not
designed to be mounted to the wall.)

4
Introduction
Sockets
Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets
available on all models.
LAN
This socket can be used to connect to external modem or network
access equipment.
SPDIF or DIGITAL AUDIO OUT(OPTICAL) socket (output)
This socket can be used to connect a compatible digital audio
receiver.
HDMI(SERVICE) or HDMI(ARC) socket (input)
The HDMI (High-Denition Multimedia Interface) socket can be
used to connect a Blu-ray player, PC with a compatible video
card installed, certain DVD players or a high-denition compatible
digital satellite decoder. This socket provides an uncompressed
digital connection that carries both video and audio data by way
of an integrated mini-plug cable.
USB 2.0 socket (input)
This socket can be used to connect a USB device.
Note: The number of USB sockets on the TV may vary according
to TV model.
ANTENNA/CABLE IN socket (input)
This socket can be used to connect the outside aerial or cable
network.
AV IN adapter socket
The AV IN adapter socket can be used to connect the attached
AV adapter cable with VIDEO and AUDIO L & R IN sockets. The
AV IN sockets can be used to connect a range of equipment,
including video recorders, camcorders, decoders, satellite
receivers, DVD players, or games consoles.
Headphone socket (output)
This socket can be used to connect headphones or stereo
earphones.
Warning: Excessive sound pressure from earphones and
headphones can cause hearing loss.
SATELLITE IN socket (input)
This socket can be used to connect a coaxial cable to receive the
signal from your satellite receiver.
COMMON INTERFACE socket
This slot can be used to watch encrypted digital TV channels by
inserting a CAM(Conditional Access Module) along with a smart
card provided by a digital TV service operator.
ANTENNA
/CABLE IN
AV IN
adapter
V L R V L R V L R
COMMON INTERFACE
LAN
Router / Modem
USB 2.0
HDD
HDMI
(SERVICE)
or HDMI
(ARC)
SATELLITE IN
SPDIF or
DIGITAL
AUDIO OUT
(OPTICAL)

5
Introduction
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control(s)
supplied with your set can be used to navigate through the menus and to congure all the general settings.
Notes:1.Figures and illustrations in this operation manual are provided for reference only and may differ from actual
product appearance. 2.The remote control type may be changed without notice, please refer to the remote control
attached with your TV. 3.Certain function may not be available for some models, e.g. GUIDE/SUBTITLE functions are
only available under DTV source. And DTV is not available for certain model.
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
To switch the sound off and back on.
Standby / quit standby.
To access the Smart TV homepage.
To display the Option menu.
▲/▼/◄/►Navigation direction buttons. The ▲/▼ buttons are
also used to change channels in TV mode.
OK To conrm an entry or selection. This button is also
used to display the channel list in TV mode.
To return to the previous menu or quit an App.
To select input source.
Press the Assistant button on your remote to talk to the
Google Assistant. (Available only when the network
connection works normally.)
To access TCL Channel.
/To control the volume.
P + /P -
To change channels.
To pop up the virtual remote control keyboard when
available.
To display the TV settings menu.
To access Netix.
To access Apps view page directly.
1 2
3
Note: Certain function may be accessed from the virtual remote
control keyboard only, please press button on the remote
to display it and operate accordingly.
Google and Android TV are
trademarks of Google LLC.
or
RC802V
How to Use the Remote Control
When using the Google Assistant button for the rst time, you will be prompted to pair the remote with the TV.
a. Keep the remote control and TV in 1 meter, please follow the on-screen guide for pairing instructions. You
can use the Google Assistant button after activating successfully.
b. This Google Assistant function is only available for content search from certain apps.
c. Set languages in the (Settings) > Device Preferences > Language under smart TV homepage to your
local language or ofcial language to enhance voice search successfully.

6
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
To switch the sound off and back on.
Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
To access TCL Channel.
LIST To display the channel list.
/To control the volume.
To display programme information, if available.
To display the TV settings menu.
P / To change channels.
To access the Smart TV homepage.
To display the Option menu.
▲/▼/◄/►Navigation direction buttons.
OK To conrm an entry or selection.
To return to the previous menu or quit an App.
To select input source.
EXIT To exit the Settings menu.
LANG To select an audio language available for selected
digital TV programme.
GUIDE To toggle the Electronic Programme Guide on or off. (Not avail-
able for some models.)
TEXT To toggle Teletext on or off.
SUBT. To select a subtitle language available for selected digital TV
programme.
Colour buttons To select tasks or Teletext pages.
To start fast reverse.
To pause playback.
To start fast forward.
ZOOM To select the desired screen format.
To start playback.
To stop playback.
To access Netix.
Note: This remote control is only available for selected models, and the remote control type may be changed without
notice.
RC802N
Introduction

7
Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
LIST To display the channel list.
To display the TV settings menu.
To access the Smart TV homepage.
To display the Option menu.
▲/▼/◄/►Navigation direction buttons.
OK
To return to the previous menu or quit an app.
To select input source.
Press the Mic button on your remote to search with your voice.
(Available only when the network connection works normally.)
To pop up the virtual remote control keyboard when available.
/To control the volume.
P
+ /P -
To change channels.
To access TCL Channel.
To access Окко. (Not available for some models.)
To access КИНОПОИСК HD. (Not available for some models.)
RC901V
Google and Android TV are trademarks of Google LLC.
Notes: - Certain function may be accessed from the virtual remote control keyboard
only, please press button on the remote to display it and operate
accordingly.
for accessing the corresponding App.
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
1 2
3
Introduction
How to Use the Remote Control
a.
b. The Google Search is only available for content search from certain apps.
c. Set languages in the (Settings) ＞Device Preferences
＞Language under smart TV homepage to your
.
Keep the remote control and TV in 1 meter, please follow the on-screen guide for pairing instructions. You
can use the Mic button after activating successfully.
When using the Mic button for the first time, you will be prompted to pair the remote with the TV.

8
Chapter 2 Getting Started
Switching On
Follow the instructions on this page on how to switch on your TV set
and the remote control before going on to following pages describing
how to use the channel set-up procedure.
1. Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine,
re or the like, throw them in a re, recharge them or try to open
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using
it for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2. Connect the power cable FIRST to the television, THEN to a mains
socket. (Note: If the power cable is connected to the television,
please only connect the power cable to the mains socket.)
Your TV set should only be connected to an AC supply. It must not
be connected to a DC supply. If the plug is detached from the ca-
ble, do not, under any circumstances, connect it to a mains socket,
as there is a risk of electric shock.
Note: The gures are for representation only, the location of power
socket of the television may differ depending on the model.
3. Connect an outside aerial to the ANTENNA/CABLE IN socket at
the back of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connecting an external aerial or other equipment tted.
Notes:
- If you want to receive the signal from your cable or cable box,
please connect a coaxial cable to the ANTENNA/CABLE IN socket
at the back of the TV set.
- If you want to receive the signal from your satellite receiver, please
connect a coaxial cable to the SATELLITE IN socket at the back of
the TV set.
4. When powered on, the TV will be turned on directly or be in
standby mode.
If the power indicator lights up, the TV set is in standby mode.
Press the button on the remote control or on the TV set to turn
on the TV.
Switching Off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low
energy consumption.
• To switch off the TV set, unplug the mains socket from the mains
outlet.

9
Getting Started
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high-speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.
Note:Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
method may be different depending on your actual network conguration. If you have any questions about your
home network, please refer to your ISP.
Connecting to a Wired Network
To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet
port
• A high-speed Internet connection
• An Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to
the Ethernet port on the back of the TV.
3. Use the Network & Internet menu to configure the
TV.
Connecting to a Wireless Network
To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless
signal
• A high-speed Internet connection
2. Use the Network & Internet menu to configure the
TV.
Note:Please follow below steps to enter the Network & Internet menu.
1. Press on the remote control to display the Smart TV homepage.
2. Press ▲/◄/► to move the cursor to (Settings) on the right top of the screen and press OK to enter the
advanced system settings.
3. Press ▲/▼to select Network & Internet, then press OK to enter the submenu and follow the on-screen
guidance to set up your network.
Router
Modem Internet
LAN port
Modem Internet
Wireless router

10
Getting Started
TV Buttons
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set: For models with below buttons on the set:
/◄TV mode In menus
P▲
/►P▼
►
Features (Short press)
(Long press)
◄
Features (Long press)
OK (Short press)
Features (Long press)
OK (Short press)
For models with only one button on the set:
Power on/Standby
Note:
Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup
The rst time you switch the set on, the Welcome screen appears, which guides you through the initial setup
process. Follow the on-screen instructions to nish the initial setup process such as selecting the language,
connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step,
you can perform the setup later from the settings menu.

11
Chapter 3 Basic TV Operations
Accessing Channels
-Using the remote control of RC802V
Using the ▲/▼ buttons: press the ▲/▼ buttons on the
remote control to scroll through the channels.
Using the OK button: press the OK button to display
the channel list and press ▲/▼/◄/►and OK to select
channels.
Using the P + /P - buttons (if available): press the P + /
P - buttons on the remote control to scroll through the
channels.
Using the button: press to display the virtual
remote control keyboard, then you can use the numeric
buttons or the List button to operate accordingly.
-Using the remote control of RC802N
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the P / buttons: press the P / buttons
on the remote control or the corresponding buttons on
the TV set to scroll through the channels.
Using the LIST button: press the LIST button on the
remote control to display the channel list and press
▲/▼/◄/►and OK to select channels.
-Using the remote control of RC901V
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the LIST button: press the LIST button on the
remote control to display the channel list and press
▲/▼/◄/►and OK to select channels.
Using the ▲/▼ buttons: press the ▲/▼ buttons on the
remote control to scroll through the channels.
Using the OK button: press the OK button to display
the channel list and press ▲/▼/◄/► and OK to select
channels.
Using the button: press to display the virtual
remote control keyboard, then you can use the numeric
buttons or the List button to operate accordingly.
Using the P + /P - buttons: press the P + /P -
buttons on
the remote control to scroll through the channels.
Watching Connected Devices
Press on the remote control to display the source
list. Press ▲/▼to select TV or other input sources and
press OK to conrm.
You can also press on the remote control to display
the homepage, press ▲/◄/►to move the cursor to
the (Inputs) area on the right top of the screen, and
press OK to enter. Then press ▲/▼and OK to select
the input source.
Adjusting Volume
Volume control: press the /buttons on the
remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites, and perform
advanced system settings for your TV. You can make
controlling with the TV remote control.
WARNING:
• Congure the network settings before using Smart TV
applications.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider, an
application’s updates or the application itself may be
discontinued.
• Depending on your country’s regulations, some
applications may have limited service or not be
supported.
• Changes in application content may be made without
prior notice by the service provider.
1. Press on the remote control to display the Smart
TV homepage.
2. Press ▲/▼/◄/►and OK to enter the desired Apps,
functions or settings.
3. Press to return to the homepage.
4. To exit the homepage, use ▲/◄/► to move the
cursor to the (Inputs) area on the right top of the
screen, and press OK to enter. Then press ▲/▼and
OK to select your desired input source.
Note: Since the connection with Internet takes time, it’s
recommended that you wait a few minutes to use
the Smart TV feature after activation of TV from
standby.
Accessing TCL Channel
Allows you to enjoy recommended contents.
1. Press on the remote control to enter TCL
Channel, or access through the TCL Channel icon
on homepage.
2. Press or to exit.
Note: UI layout of TCL Channel will vary according to
different models or countries.
Using Advanced System Settings
Menu
Allows you to not only adjust device settings, such as
Network, Inputs, Google Cast, Power and Apps, etc.,
but also set preferences.
or

12
1. Press on the remote control to display the Smart
TV homepage.
2. Press ▲/◄/►to move the cursor to (Settings) on
the right top of the screen and press OK to enter the
advanced system settings.
3. Press ▲/▼to choose the items and press OK to
enter.
4. Press to return to previous interface and exit.
Using TV Settings Menu
Allows you to adjust TV settings, such as picture and
sound.
1. Press on the remote control to display the TV
settings menu.
2. Press ▲/▼to select the desired item, then press
OK/► to enter the corresponding submenu.
3. In submenus, press ▲/▼to select menu options,
then press OK/►to enter the option list or the
corresponding submenu, or press OK to toggle on or
off, or press ◄/► to adjust the setting.
4. Press to return to the previous menu.
5. Press to close the menu.
Notes:
-You can also press on the remote control, select
TV settings (if available) and press OK to enter the
TV settings menu. Some options may not be avail-
able for certain signal sources.
-Setting LED motion clear on will make fast moving
images clearer by controlling the LED backlight, but
the picture will be darker and more ickering than
with LED motion clear off.
Basic TV Operations

13
1. Following the directions printed on the CAM, gently
insert the module into the common interface slot on
the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the CAM from the slot. Removing
the module will deactivate the digital services.
Accessing Common Interface Services
After inserting and activating the CAM, press on the
remote control, select Channel > Common interface
and press OK/►to enter.
This menu option is only available if the CAM is correctly
inserted and activated. On-screen applications and
content are provided by your digital TV service operator.
Note: This feature is only available under DTV source.
Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-C/DVB-T/
DVB-T2/DVB-S/DVB-S2 digital broadcasts. With digital
broadcasts, you have the additional option of selecting a
preferred subtitle language.
Note: Some options are availebale only when Subtitle
is set to on.
Turning On/Off Subtitles
1. Press on the remote control, select Channel >
Subtitle and press OK/► to enter.
2. Select the Subtitle option, press OK to toggle
between on and off.
3. Press to close the menu.
Enabling Subtitle Languages on Digital TV
Channels
1. Press on the remote control, select Channel >
Subtitle > Digital subtitle language 1st and press
OK/► to enter.
2. Press ▲/▼to select a subtitle language as your
preferred language and press OK to conrm.
3. Press ▲/▼to select Digital subtitle language 2nd
and press OK/► to enter.
4. Press ▲/▼to select a secondary subtitle language
and press OK to conrm.
5. Press to close the menu.
Selecting a Subtitle Type on Digital TV
Channels
1. Press on the remote control, select Channel >
Subtitle > Subtitle type and press OK/► to enter.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
-you are prompted that there are no channels in TV
mode;
-you want to update your channels.
1. In TV mode, press
on the remote control and
select Channel > Channel scan. Press OK/► to
enter.
2. The TV installs and arranges channels according
to your country or region. Press ▲/▼ to select
Country/Region, and press OK/► to enter. Enter
the default password 1234 or your own password in
case you have changed the password in the System
> Lock menu. Press ▲/▼ to select your country or
region and press OK to confirm.
3. Press ▲/▼ to select Automatic search and press
OK/► to enter.
4. Press ▲/▼ to select Tuner mode and press ◄/►
to select Cable, Antenna or Satellite.
5. Press ▲/▼ to select other options and use ◄/► to
configure.
6. After configuration is completed, press ▼ to select
Search and press OK to start scanning channels.
7. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or swap channels,
press on the remote control, select Channel >
Channel organizer and press OK/► to enter.
Note: If the channel search retrieved only the
analogue channels, it could be caused by poor
broadcasting and therefore is not covered by
manufacturer warranty. Manufacturers cannot be
held responsible for lack of or poor broadcasting
in some areas.
Common Interface
(* not available for some models)
Encrypted digital TV channels can be decoded with a
Conditional Access Module (CAM) along with a smart
card provided by a digital TV service operator.
The CAM may enable several digital services,
depending on the operator and services you choose
(for example, pay TV). Contact your digital TV service
operator for more information about services and terms.
Using the Common Interface Function
WARNING: Switch off your TV before inserting a
CAM. Be sure to follow the instructions described
below. Wrong insertion of a CAM may damage both
the module and your TV.
Chapter 4 Using More of Your TV

14
Using More of Your TV
(Settings) > Network & Internet,use ▼to select
Networked standby and press OK to activate it.
When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
Notes:
-This feature is disabled if you press and hold the
button on the remote control and conrm to shut the
TV down
-Before using the feature of network wake up, make
sure > (Settings) > Device Preferences >
Quick start > Enable quick start is set to on.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling T-Link
1. Press on the remote control, select System >
T-Link and press OK/► to enter.
2. Select the T-Link option, and press OK to toggle
between on or off.
3. Press to close the menu.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote.Press OK to turn it on to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
standby mode when you turn off the TV with the TV
remote. Press OK to turn it on to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices
may not interoperate correctly when connected to
this TV. The user manual or the manufacturer of
the problematic devices should be consulted for
further information.
Using EPG (Electronic Programme
Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select and
view programmes.
1. Press on the remote control, select Channel >
EPG and press OK/► to enter, or press GUIDE
directly (if available) on the remote control, the
Programme Guide menu will appear, which allows
you to get information about the current or next
programme playing on each channel. Navigate
through the different programmes using the
▲/▼/◄/► buttons on the remote control.
2. Use the related buttons shown at the bottom of the
2. Press ▲/▼ to select a subtitle type and press OK to
conrm. You can select Hearing impaired to display
the hearing impaired subtitles with your selected
language.
3. Press to close the menu.
Using Teletext
Selecting Decoding Page Language
1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
OK/► to enter.
2. Press ▲/▼to select a proper type of language in
which Teletext will display and press OK to conrm.
3. Press to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1. Press on the remote control, select Channel >
Teletext > Digital teletext language and press
OK/► to enter.
2. Press ▲/▼to select a language and press OK to
conrm.
3. Press to close the menu.
Using Quick Start Function
It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption .
1. Press on the remote control to display the
homepage, Press ▲/◄/► to select (Settings)>
Device Preferences > Quick start> Enable quick
start and press OK to toggle between on and off.
2. Press repeatedly to return to the homepage.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective home network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An App which supports network waking up function,
has been installed into the controller;
4. Networked standby is set to on in the Network &
Internet menu under homepage. Press , select

15
Using More of Your TV
Netix Settings
Netix provides on-demand movies and TV shows
delivered via the Internet. Netix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netix.com <http://
www.netix.com/>.
Note: You can directly access Netix via clicking the
Netix button on the remote control.
Password in Parental Control
• The default password is 1234. You can change it to a
new one.
• The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
screen to view EPG.
- Programme lter: Programme guide lter for
digital TV programmes.
• Press to display the type list of the
programme.
• Navigate through the different types using the
▲/▼ buttons on the remote control.
• Select one or more types, which you want to
highlight from the type list, press OK to select or
deselect. A checkmark will appear to the right of
the type when selected.
- Custom schedule: Press ▲/▼ to select a
programme, then press the RED button to set the
schedule, press OK to enter Schedule reminder.
- Select date: Press the GREEN button to select
date.
- Schedule list: Press the YELLOW button to view
your schedule list.
Note: If using RC802V or RC901V remote control to
access the colour buttons, you need to press
button on the remote control to display the virtual
remote control keyboard rst.
3. Press to exit EPG.
Bluetooth Function
(* not available for some models)
Bluetooth®is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control to display the
homepage, Press ▲/◄/► to select (Settings) >
Remotes & Accessories and press OK to enter.
2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to WiFi
access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you
face interruptions in audio reception, you should
restart your Bluetooth device to nd frequency
with less interferences and if you continue to face
issues you should move closer to TV or increase
space between TV and source of interferences.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TCL is under license. Other trademarks
and trade names are those of their respective owners.

16
Chapter 5 Other Information
formats, which are not compatible with your TV.
6. Video stops playing midway.
-Mistakes may occur when videos are copied or
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do
software updating?
-No power cuts when software updating;
-Avoid any operations with your remote control when
software updating;
-Depending on your internet connection speed, the
software updating process may take some time.
8. There are no distinct changes of TV interface
after software updating.
-Under certain conditions, software updating may not
only update or add new functions but also improve
the performance of the TV set, without distinct
changes of interface. Also, there may be no changes
to the user interface at all.
9. What should I do when software updating
process stops due to a sudden power-off?
-If you do software updating by USB, do not pluck
the USB drive from your TV, and restart your TV
to continue software updating; If you do software
updating by Network, also restart your TV and check
if it is functioning correctly.
10. With a USB device being inserted into the TV in
advance, I am prompted that no USB devices are
detected after I access Media, why?
-There may be something wrong with your portable
hard drive(s), damaged or with low voltage. It's
recommended to provide an additional power supply
to the hard drive(s).
11. External device cannot be recognized.
-Some external devices (e.g. webcam, smart phone,
tablet, game handle, and external wireless adapter)
may not be compatible with the TV and cannot be
supported for certain functions (wireless display,
gesture control, face recognition, if any). Please try a
similar device. If it does not work, contact your local
dealer.
12. Voice search does not work.
-Check if your remote control has been successfully
paired with your TV.
-Check if the language setting is correct.
-Check if Google server is available and stable.
1. Fail to link to the network.
-Check if your TV is connected with the network;
-Reboot your TV;
-Consult your internet service provider, to conrm
if access of your router is supported. Refer to the
operation manual of your router, and activate its
DHCP function after linking the network to your TV.
-Make sure your TV is connected to a router, and
make sure your router is powered on. Check that
your router/modem has an internet connection, and
that your Ethernet cables/wireless connection is OK.
Test your connection with a computer to make sure it
is OK. Should the problem persist, contact customer
service.
-Check if TV system time is correct or not. Sometimes
TV system time is synchronized to the wrong time
from abnormal broadcast signal. In this case, please
set system time manually.
2. The video could not be played smoothly.
-Videos from your USB ash drive --- It may be
caused by abnormal data transmission, or its code
rate is far beyond the supported formats of this TV
set.
-Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to
handle online videos.
b. Peak internet usage times may affect the
bandwidth.
c. Check if any other computers on the same
network are also operating, as they may be using
up bandwidth. Especially if they are downloading
or playing online videos.
d. The video may not be smooth itself, it is not the
problem of your TV or network.
3. When two portable hard drives are connected
with the TV at the same time, they will not be
recognized sometimes.
-All portable hard drives consume a lot of power,
which may result in power supply problems. We
recommend inserting only one hard drive, or a low
power consumption portable hard drive.
4. The video from a portable hard drive (USB) is
playing with no sound.
-The audio format of the video in your portable hard
drive is not supported by the TV player.
5. Some videos fail to play.
-The formats of the videos may not be supported
by the TV, especially videos shot by certain kinds
of cameras, generally with their private protocol of
Problems & Solutions
Note:Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected
TV models can disregard them.

17
Other Information
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
minimize the interference.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak,
it may be necessary to install a special antenna to
improve the reception.
1. Adjust the position and orientation of the indoor/
outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may
happen.
Ignition
Black spots or horizontal streaks appear, or the picture
utters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following
two paths. One is the direct path, the other is reected
from tall buildings, hills, or other objects. Changing the
direction or position of the antenna may improve the
reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the
picture. Find out and remove the radio interference
source.
* To bring you better visual experience, please remove
all labels from TV front panel and screen before use.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No color
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may
be received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the button to increase volume.
2. Volume is set to mute, press the button to
restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to

18
Other Information
Legal Statement
[Legal Statement] of TCL - manufacturer of this TV set
Due to the various capabilities of products featuring
the SmartTV - Services, as well as limitations in the
available content, certain features, applications, and
services may not be available on all devices or in all
territories. Some features on SmartTV may also require
additional peripheral devices or membership fees that
are sold separately. Please visit our website for more
information on specic device information and content
availability. The services and availability of content
through SmartTV are subject to change from time to
time without prior notice.
All content and services accessible through this device
belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property
laws. Such content and services are provided solely
for your personal noncommercial use. You may not
use any content or services in a manner that has
not been authorized by the content owner or service
provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service
provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services displayed through this device.
You expressly acknowledge and agree that use of the
device is at your sole risk and that the entire risk as to
satisfactory quality, performance and accuracy is with
you. The device and all third party content and services
are provided “as is” without warranty of any kind,
either express or implied. TCL expressly disclaims all
warranties and conditions with respect to the device and
any content and services, either express or, implied,
including but not limited to, warranties of merchantability,
of satisfactory quality, tness for a particular purpose, of
accuracy, of quiet enjoyment, and non-infringement of
third party rights. TCL does not guarantee the accuracy,
validity, timeliness, legality, or completeness of any
content or service made available through this device
and does not warrant that the device, content or services
will meet your requirements, or that operation of the
device or services will be uninterrupted or error-free.
Under no circumstances, including negligence, shall
TCL be liable, whether in contract or tort, for any direct,
indirect, incidental, special or consequential damages,
attorney fees, expenses, or any other damages arising
out of, or in connection with, any information contained
in, or as a result of the use of the device, or any content
or service accessed by you or any third party, even if
advised of the possibility of such damages.
Third party services may be changed, suspended,
removed, terminated or interrupted, or access may be
disabled at any time, without notice, and TCL makes no
representation or warranty that any content or service
will remain available for any period of time. Content
and services are transmitted by third parties by means
of networks and transmission facilities over which TCL
has no control. Without limiting the generality of this
disclaimer, TCL expressly disclaims any responsibility or
liability for any change, interruption, disabling, removal
of or suspension of any content or service made
available through this device. TCL may impose limits
on the use of or access to certain services or content,
in any case and without notice or liability. TCL is neither
responsible nor liable for customer service related to
the content and services. Any question or request for
service relating to the content or services should be
made directly to the respective content and service
providers.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks
of Dolby Laboratories Licensing Corporation.
The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
* Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specications may be changed without notice.
18