Teac P-55C User manual

What Thermal Printing Means to Your Bottom Line...
The REAL Facts. Is it really true that inkjet printing is actually cheaper than thermal printing? Why would you want to even
consider to offer thermal printing to your customers as an alternative or complement to inkjet printing?
The following summarizes the key facts you need to know and the advantages that thermal printing offers
to your customers:
T ermal Printing Inkjet Printing
IMAGE QUALITY
Photo-realistic images are only achieva le with thermal
printing. They are even sharper than replicated prints.
QUANTITY/QUALITY CONSISTENCY
You have experienced inconsistent print-quality with inkjet printing.
Print quality will look different ased on how much ink remains in
any of the cartridges. With thermal printing, each ri on contains
enough pigment to print 500 discs. Each print is identical.
DRY TIME
Inkjet-printed media could take a few minutes to dry. But inks
stay wet around the outside edge and on the inner hu due to
surface finish characteristics of all discs. This leads to ink
“smearing and smudging” caused y handling of un-dried
discs. Thermal prints are never wet to have to dry! Thermal
technology eliminates dry time.
INDELIBILITY
Inkjet prints will easily scratch, fade, run and smudge. This
will never happen with thermal prints.
Key Printing Obstacles T at Occur...
Average Quality
Depending on
Media Quality
Inconsistent
Varies / can get
very Messy
Will Scratc ,
Fade, Run or
Smudge and is
NOT water-proof
Hig est Print
Quality in t e
Industry
Consistent
Instantly wit
No Mess
Won’t Scratc ,
Fade, Run or
Smudge and is
Water-proof
inkjet print #20... ...print #200 ...print #475
Dye-Sublimation
thermal sample inkjet sample

T ermal Printing Inkjet Printing
EDGE-TO-EDGE PRINTING
Inkjet printer can not print to the edge of the disc. Due to
non-printa le characteristic of the edges of an inkjet disc,
over-run ink never dries and smears when touched. Thermal
printing prints edge-to-edge.
COST/SAVINGS
It is difficult to forecast inkjet print-output since ri on/ink output
could vary from jo to jo . You might save initially on the cost
of the printer, ut incur more future costs with inefficient inkjet
cartidge replacement…and related jo ‘re-runs”. With thermal
printing you can get 500 prints per ri on, GUARANTEED.
COLOR SHIFT
Color shifting occurs when one of the three colors in a cartridge
runs out. This causes overall color accuracy to ‘shift’ in the middle
of a run. With thermal printing, there is a solutely no color shifting.
SEND IN YOUR IMAGE TODAY AND WE WILL PRINT A SAMPLE FOR YOU ON DISC!
Call Us TODAY at 323-727-4859 o email us at [email protected] or more in ormation.
Printing Problems t at occur...
BANDING
Inkjet Printing can create visi le horizontal lines (‘ ands’) across
the disc as ink runs out. Banding happens generally with larger
jo s that are set up to run unattended. What is your REAL cost-
per-print when you have to throw out 20 ad discs?....repeatedly?!
With thermal printing, 500 identical discs-per-ri on is ASSURED,
so you can truly use the printer unattended.
TEAC America, I c
7733 Telegraph Road, Mo tebello, CA 90640
www.teac.com/DSPD DSPD-87641/1007/DOT5M
2007 TEAC America, Inc. All rights reserved. All trademarks and registered
trademarks mentioned herein are the property of their respective companies.
Fixed Costs
NO Color S ifts
NO Banding
Will Print
Edge-to-Edge
Variable – Not so
easy to Forecast
Color S ifting
will occure
Varies / can get
very Messy
Cannot Print
Edge-to-Edge
thermal sample inkjet sample
Dye-Sublimation