Technaxx TX-182 User manual

1
Model: TX-182 Article No. 4980, 01/2022
Technaxx®* User Manual
Retro Video Digitizer TX-182
Before using the appliance for the first time, please read the instructions
for use and safety information carefully.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capacities, or by persons lacking in
experience or knowledge, unless they are supervised or instructed on the
use of this device by a person responsible for their safety. Children should
be supervised to ensure they do not play with this device.
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Enjoy your product. *Share your experience and opinion on one of
the well-known internet portals.

2
Model: TX-182 Article No. 4980, 01/2022
Table of Contents
Hints........................................... 2
Safety instructions...................... 3
Warnings.................................... 3
Features..................................... 4
Quick start guide ........................ 5
Product overview & functions..... 6
Display symbols ......................... 7
Before the start........................... 7
Charging the battery................ 7
Installing the Memory card...... 8
Connecting a video source...... 9
First start .................................. 10
Recording mode settings.......... 10
Set resolution........................ 10
Setting Date and Time........... 11
Settings................................. 13
Recording................................. 14
Play mode settings................... 15
How to set ............................. 15
Settings ................................. 16
Playback................................... 16
Show recordings on TV............ 17
Copy recordings to PC ............. 18
Troubleshooting........................ 18
Edit/Convert recordings............ 19
Technical specifications ........... 20
Support..................................... 20
Care and maintenance............. 20
Declaration of Conformity......... 21
Disposal.................................... 21
Hints
⚫Do not use the TX-182 to capture, reproduce or copy copyrighted works,
whether video or audio. The unauthorized reproduction or distribution of
copyrighted work is illegal! Make sure that the work to be digitized does not
have a copyright disclaimer, if this is the case do not use the TX-182 to
digitize the work. ⚫Never hold or carry the device by the power cable. ⚫
Do not clamp or damage the power cable. ⚫Ensure that the power adapter
do not come into contact with water, steam or other liquids. ⚫Only use the
product for purposes due to its intended function & only for household use.
⚫Do not damage the product. Following cases may damage the product:
Incorrect voltage, accidents (including liquid or moisture), misuse or abuse
of the product, faulty or improper installation, mains supply problems
including power spikes or lightning damage, infestation by insects,
tampering or modification of the product by persons other than authorized
servicepersonnel, exposure to abnormally corrosive materials, insertion of
foreign objects into the unit, used with accessories not preapproved. ⚫
Refer to and heed all warnings and precautions in the user manual. ⚫The
user alone bears the risk.

3
Model: TX-182 Article No. 4980, 01/2022
Safety instructions
⚫Never touch the device with wet or damp hands.
⚫The device can only be operated with the voltage described on the rear
panel and on the power supply unit.
⚫Do not position this device near moisture or water.
⚫Do not place the device on an unstable surface. The unit could be
damaged or persons could be injured. Any attachments should be made
only in accordance with the manufacturer's instructions or obtained from
the manufacturer.
⚫The cable is sheathed and insulates the current. Do not place any objects
on the cable, as this could cause the protective function to be lost. Avoid
placing excessive stress on the cable, especially at sockets and plugs.
⚫If you want to pull the plug out of the socket, always pull on the plug and
not on the cable. The cable could otherwise break.
⚫To protect the unit during a lightning storm or when it is left unattended
for long periods of time: unplug it from the wall outlet This will prevent
damage due to lightning strikes.
⚫Do not overload wall outlets, extension cords, or other wiring as this may
result in fire or electric shock.
⚫Do not insert any objects into the openings of the unit, as current flows
in some places and contact may cause fire or electric shock.
⚫Unplug the power cord from the wall outlet for cleaning.
⚫Do not use liquid cleaners or cleaning sprays. The device may only be
cleaned with a damp cloth.
⚫Do not connect any additional devices that are not recommended by the
manufacturer.
⚫Do not connect the audio output from a high-power amplifier to the
product’s audio input.
⚫We accept no liability for damage to property or personal injury caused
by improper handling or failure to observe the safety instructions and the
operating instructions. In such cases any warranty claim expires! We
accept no liability for consequential damage.
⚫Do not open the device, do not attempt to repair it, do not carry out any
conversions or modifications - this will result in the loss of the warranty
claim. We accept no liability for consequential damage.
Warnings
⚫Do not disassemble the TX-182, it may result in short-circuit or damage.
⚫Battery warning: Improper use of the battery may cause fire or chemical
burns. The battery may explode in case of damage. ⚫Do not modify, repair

4
Model: TX-182 Article No. 4980, 01/2022
or remove without professional guidance. ⚫Do not use corrosive or volatile
liquid for cleaning. ⚫Do not drop or shake the TX-182, it may break internal
circuit boards or mechanics. ⚫Keep the TX-182 in dry and ventilated
environment. Avoid high humidity and high temperature. ⚫This TX-182 is
not water-resistant; keep it away from moisture. ⚫Keep the device away
from little children.
Features
•Digitize analog videos from Video8, Hi8, SVHS, VHS, VCD, DVD, VCR
or DV
•2.4” (6cm) display to watch your recordings on the video digitizer
•Save videos directly to MicroSD card up to 32GB
•Built in rechargeable battery (recordings up to 4hours)
•Capture video material max. file size 90 minutes
•Restore and share your family memories from old times
•Share your digitalized videos on your PC or your TV (HDMI or AV)
•Supports recording quality VGA or QVGA
•Built in loudspeaker (mono)

5
Model: TX-182 Article No. 4980, 01/2022
Quick start guide
1. Insert microSD card (max. 32GB) and connect the device to the
"MiniUSB" power port via MiniUSB data/power cable. Insert
Composite/RCA signal source into Composite/RCA input port of TX-182.
Long press the On/Off Menu button for 3 seconds to turn on the power and
enter the recording mode. (See chapter “Recording mode settings” for
details.)
2. After turning on the power short press the REC button to start recording.
To stop recording, short press the REC button again. (See chapter
“Recording” for details.)
3. To play recorded video, short press the MODE button to switch to the
play mode. Then short press the OK button to start playing video.
Short press OK button to suspend play again. If there are multiple
videos recorded, short press the button to switch to last video. Short
press the button to switch to the next video. If want go back to the
recording mode, short press the MODE button again. (See chapter
“Playback” for details.)
4. To adjust the volume, short press the VOL+ Button to increase the
volume and short press the VOL- Button to decrease the volume.
5. To output images to a large-screen display, just plug the HDMI cable into
the HDMI OUT port or use the AV cable to plug in the AV OUT port. (See
chapter “Show recordings on TV” for details.)
6. If want to view recorded videos on the computer. Connect the TX-182 to
the computer via the USB data/power cable. (See chapter “Copy
recordings to PC” for details.)

6
Model: TX-182 Article No. 4980, 01/2022
Product overview & functions
Top and Side view
1
Outputs
6
Left audio input
2
Input (Composite; RCA)
7
Video input
3
3.5mm AV video output
8
MicroSD card slot
4
HDMI output
9
Mini USB connector
5
Right audio input
Front view
10
On/Off Menu
15
Go back in the file list
11
Mode - Select mode
16
Go forward in the file list
12
REC - Start/Stop recording
17
OK Start/Stop playing
13
The buttons within the cross
perform different functions
depending on the mode
selected
18
VOL- - Lower the volume
13.1
Play mode
19
Record without sound
13.2
Recording mode
20
OK Snapshot mode
14
VOL+ - Increase the volume

7
Model: TX-182 Article No. 4980, 01/2022
Display symbols
MicroSD card
Recording mode
Battery indicator
Available button alternatives
Exit –Press the On/Off Menu button to leave the setting mode
Set –Press OK to select and save the selected setting
Before the start
Charge at least 5 hours before using it for the first time!
Note: When the battery is completely depleted, it will need approximately
5 hours for a full charge!
The TX-182 allows you to record video materials from a range of video
sources, such as Video8, Hi8, SVHS, VHS, VCD, DVD, VCR or DV. You
can also take snapshots of the video material.
The MicroSD card saves your recording in AVI format. File size is 13-15MB
per minute.
Any segment you record that is more than 90minutes long is divided into
parts.
The file name is automatically created in order (0001, 0002, etc.). The files
can then be transferred to a PC and be renamed.
Charging the battery
Charge the TX-182 for at least 1 hour before turning it on. Note: The device
has no LED indicator to show whether the device is charging or is fully
charged. Only way to see the battery status is to turn on the device.
The built-in battery can be charged in two ways:
AVia the main power socket
Use:
- USB power adapter
- MiniUSB Data/Power cable

8
Model: TX-182 Article No. 4980, 01/2022
BVia the PC’s USB port
Use:
- MiniUSB Data/Power cable
Note:
- After the product is connected to PC, the display turns black and it
charges. Only further action that can be done in this state is transferring
data form the MicroSD card to PC.
- When the battery is completely depleted, it will need approximately 5
hours for a full charge!
Installing the Memory card
Use a MicroSD card with max.
32GB. For optimal results, a memory
card with speed class 10 is
recommended.
Note: Format FAT32 required.

9
Model: TX-182 Article No. 4980, 01/2022
Connecting a video source
Connect the TX-182 to a video source like shown in one of the following
ways:
1
Yellow (video)
4
RCA-cable
2
White (audio L)
5
Source (Video8, Hi8, SVHS, VHS,
VCD, DVD, VCR, DV, camera)
3
Red (audio R)
6
AV-cable

10
Model: TX-182 Article No. 4980, 01/2022
First start
Make sure the TX-182 is connected
to the power supply or that the
battery is charged and that the
memory card is inserted. Press the
On/Off Menu button for approx. 3
seconds to turn the TX-182 On or
Off.
Upon being powered up, the TX-182 starts in recording mode and the
following information is shown on the display:
1
MicroSD card inserted
2
Recording mode
3
Recording resolution /
Color encoding standard
4
Recording time to MicroSD
card
5
Battery status
6
Volume level of speaker
(no influence to recording)
Note: If no memory card (MicroSD) is inserted, the message “No Card”
appears on the display.
Recording mode settings
Set resolution
Press the On/Off Menu button briefly once more to
access the settings.

11
Model: TX-182 Article No. 4980, 01/2022
Scroll between the various menu alternatives by using the
VOL+ and VOL- buttons.
Press OK to access to the sub menu.
Press OK to save theselected alternative.
Note: The selected alternative is shown in yellow in the
main menus; however, it appears in blue in the sub
menus. VGA is better quality then QVGA.
Press the On/Off Menu button to leave the settings mode.
Setting Date and Time
You can use this setting to show the date and time in the recording. You
can set it according to the time when your video was recorded. It does not
need to be the current date and time. Note: You also can turn of the time
stamp.
Press the On/Off Menu button briefly to access the
settings.
Using the VOL- button, scroll down to: Date input - Enter

12
Model: TX-182 Article No. 4980, 01/2022
Press OK to reveal an sub menu.
Using the VOL- button, scroll down to: Set and press OK
to enter. Note: The blue field is now highlighted.
Use the VOL-/VOL+ button to change the date format.
Use the button, to scroll down to the year.
Set the correct year by using the VOL- and VOL+ buttons.
Then use the button to scroll further to the month etc.

13
Model: TX-182 Article No. 4980, 01/2022
Press OK to save the settings and return to the settings
menu.
Once all the settings are made, return to the recording mode by pressing
the On/Off Menu button. The selected settings remain saved even if the
device is switched off.
Settings
The other settings in the video recording menu are made in the same way
as you set the date and time.
The available settings are:
Menu
Options
Size
VGA (640x480) or QVGA (320x240) recording
resolution
Time Stamp
Off, Date or Date and time visible on the recording.
Auto off
Automatic shut-off set to OFF, 15, 30 or 45 minutes.
Automatic shut-off can only work when it is not
recording.
Language
Choose several languages to operate the device in.
Supported: EN, FR, DE, IT, SP, PO, PL, NL, CZ
Date input
Set the date and time, refer to the chapter “Setting date
and time”
Set independently the time in the TX-182. For instance,
if the video was recorded in the summer of 2007, the
date can be inserted here.
Sound
On or Off, Off mutes the recording.
Sys. Reset
Set the device back to factory settings.
Software version
Shows installed firmware version.

14
Model: TX-182 Article No. 4980, 01/2022
Recording
Note: ⚫The max file length of a recording is 90minutes. After that a new
file is created automatically. ⚫It could also be possible that bottom and top
be cut off while recording.
1. Connect your TX-182 to a video source.
2. Turn on the video source.
3. Turn on the TX-182.
4. Make sure the video source image is shown on the TX-182 display.
5. Press the REC button to begin recording. The
counter in the top right corner of the display turns red.
6. Press PLAY on the video source to begin playing your video. The movie
is now also visible on the display of the TX-182.
While your movie is being recorded, you can do the following:
ARecord the movie without sound
Press button once to turn off the sound (Just
mutes recording not the device). Press button
once more and the sound is on again.
Note: The loudspeaker of the TX-182 playbacks the
audio even when you mute the recording.
BTake snapshots
Press the button it will stop and save the
recording and change to Snapshot mode. Press
button again will take a snapshot and save
the snapshot.
Note: The video material is playing along even you
press the on the TX-182. The play/pause
needs to be coordinated by the video source.
7. Press the REC button to stop and save the recording.
Note: You also can record video material while the device is connected
with the USB power adapter.

15
Model: TX-182 Article No. 4980, 01/2022
Play mode settings
How to set
Press the Mode button to select the play mode.
The TX-182 is now in play mode.
Press the On/Off Menu button briefly to get to the
settings.
Scroll between the various menu alternatives by using
the VOL+and VOL- buttons.
Press OK to access to the sub menu.
Using the VOL-button to scroll down to the desired
setting. Note: The blue field is now highlighted.
Press OK to save the setting and return to the settings
menu.

16
Model: TX-182 Article No. 4980, 01/2022
Settings
The following settings can be done in play mode:
Delete
Delete recordings or snapshots. Choose: Single, All or Select.
At Select choose the file from the miniatures that are
displayed.
Protect
Prevents the recordings from being deleted. Choose: Single,
All or Select. At Select choose the file from the miniatures that
are displayed. Protected files are indicated with a padlock.
Format
Formats the memory card and deletes all the files, even those
that are protected.
Slide
Presents the snapshots in the form of a slide show.
Volume
Set the volume level between 1 and 8.
Version
Shows installed firmware version.
Playback
1. Turn on your TX-182.
2. Use the Mode button to select the play mode.
The TX-182 is now in play mode.
3. Select the desired recording using or buttons.
4. Press OK to playback the recording.
5. While playback, long press button to fast forward. The max. speed
of fast forward is 8x. While fast forward press button to resume to
normal playback speed.
You can zoom in and out on snapshots in several steps
by pressing the OK or Vol+ button.
Pressing the Vol- button will zoom back and ultimately
data about the image file are shown.
Note: Zoom In and Zoom Out is only useable for
photos.

17
Model: TX-182 Article No. 4980, 01/2022
Show recordings on TV
You can connect your TX-182 to a monitor (TV) via AV-cable or by using
HDMI-cable. After connecting the TX-182 with either an AV-cable or a
HDMI-cable the display turns black. You can see the recordings now on
the monitor (TV).
1
Yellow (video)
5
AV-cable
2
White (audio L)
6
Monitor (TV)
3
Red (audio R)
7
HDMI-cable
4
AV-output
8
HDMI output

18
Model: TX-182 Article No. 4980, 01/2022
Copy recordings to PC
By connecting the TX-182 to a PC, you can process your recordings and
snapshots on the PC itself. A drive routine will automatically be installed
onto your PC the first time you connect the TX-182 to your PC. The TX-
182 then appears as a removable disc drive on the PC, so you can copy,
rename or delete your recordings.
1. Start the PC.
2. Connect the TX-182 to the PC using the MiniUSB Data/Power cable.
3. Press and hold the On/Off Menu button up to 5 seconds.
4. The TX-182 now appears as a removable disc drive on the PC.
5. Open the folder and copy & paste the files to your PC.
Note: It is not possible to playback recordings on the TX-182 while the TX-
182 is connected to the PC.
Troubleshooting
Problem
Solution
No video or audio
Before using the REC button of the TX-182,
make sure the input source (DV, DVD player,
VHS) is turned on and can provide audio and/or
video signal to the TX-182.
Make sure that the AV- or RCA-cable is securely
connected to both the input source and TX-182.
Scart adapter is set to IN. Set it to OUT.
Video hangs or flickers
Use a MicroSD card whose transfer speed is
class 10 or above.
No recordings saved
Software crash
Use a needle to push the mini hole at the back
of the TX-182 to reset it.
Hardware crash
Display remains black
The battery may be dead. Connect the charger
and try again.
On/Off Menu button does
not work
No recordings saved
The cables may be incorrectly connected or be
connected to loosely.

19
Model: TX-182 Article No. 4980, 01/2022
Edit/Convert recordings
The TX-182 comes with a video edit
software Arcsoft ShowBiz (Windows only),
you can edit your recordings with it.
Install it from CD (or download the software
under www.technaxx.de/support) on PC
and open it.
1. You can combine two or more video in
one, just drag them into Arcsoft Showbiz.
2. You can cut a video to two or more
3. Click “Produce”after editing, you can
create DVD or upload video to YouTube.
4. Click “Create file”to create multiple files
for different devices.
Note: Click the “?”key on the software
panel to get more information and help

20
Model: TX-182 Article No. 4980, 01/2022
Technical specifications
Recording resolution
VGA (640x480), QVGA (320x240)
Video / Photo format
AVI / JPG
File size recordings
13-15MB per minute; 4GB equal approx. 4h of
recordings
File length recording
Max. 90minutes, after that a new file is created
Working time
Up to 4h
Charging time
Up to 2.5h
Battery
Rechargeable lithium polymer battery 3.7V,
1500mAh
Memory card
MicroSDHC max. 32GB, class 10 or above
Power adapter
Input: AC 100-240V 50/60Hz max. 0.4A;
Output: DC 5V / 1A
Display
2.4” (6cm) colored TFT
Controls
8 buttons
Languages
EN, FR, DE, IT, SP, PO, PL, NL, CZ
Software
Windows only; English
Power consumption
Max. 5W
Operating temperature
0°C up to +40°C / 32°F up to 104°F
Material
ABS
Weight / Dimensions
114g / (L) 10.5 x (W) 7.5 x (H) 2.5cm
4oz / (L) 4.13 x (W) 2.95 x (H) 0.98 inch
Package content
Technaxx®Retro Video Digitizer TX-182, USB
power adapter, RCA-cable, AV-cable, HDMI-cable,
MiniUSB Data/Power cable, Scart to RCA adapter,
4GB MicroSD card, CD, user manual
Support
Service phone No. for technical support: 01805 012643 (14 cent/minute
from German fixed-line and 42 cent/minute from mobile networks). Free
Email: [e-mail]
The support hotline is available Mon-Fri from 9am to 1pm & 2pm to 5pm
Care and maintenance
Clean the device only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the device.
This device is a high-precision optical instrument, so in order to avoid
damage, please avoid the following practice:
●Use the device in ultra-high or ultra-low temperature.
●Keep it or use it in moist environment for long.
●Use it in rainfalls or in water.