Technimount System BRACKET PRO 75 Series User manual

BRACKET PRO SERIE®75
USER GUIDE
EMSTM

Return To Table of Contents
2BP75 UG 202110-01 www.technimount.com





Bracket Pro Serie®, Technimount EMS™ are registered trademarks of Technologies CGC Inc.
Tempus® LS is a registered trademark from Philips.
                
comments to our Customer Service Department at [e-mail].
Copyright

www.technimount.com BP75 UG 202110-01 3
Return To Table of Contents
OFFICE ADDRESS

3770 Jean Marchand Street, Suite 100-C
Quebec (QC) G2C 1Y6
Canada
[email protected]
www.technimount.com
T + 1 888.639.2758
F + 1 855.339.6351
NOTE:

or maintenance processes, please send an email to [e-mail]
    


Contact Information

4BP75 UG 202110-01 www.technimount.com
Table of Contents
COPYRIGHT ............................................................................................................................................................ 2
CONTACT INFORMATION....................................................................................................................................... 3
INTRODUCTION ..................................................................................................................................................... 6
Purpose of the Document ............................................................................................................................................6
Product Description .....................................................................................................................................................6
Intended use of the Product .......................................................................................................................................6
Possible Mounting Options for the Bracket Pro Serie 75 ........................................................................................7
Symbols and Definitions ...............................................................................................................................................8
Warning / Caution / Note .............................................................................................................................................9
Product Illustration ...................................................................................................................................................10
BRACKET Pro Serie 75...........................................................................................................................................10
Front View ........................................................................................................................................................................10
Back View ..........................................................................................................................................................................11
Specifications ..............................................................................................................................................................12
SUMMARY OF SAFETY PRECAUTIONS ................................................................................................................ 14
Warning/Caution/Note ..............................................................................................................................................14
INSTALLATION GUIDE .......................................................................................................................................... 16
Removing the Packaging for Installation .................................................................................................................16
Tools required for installation .................................................................................................................................16
Installation of the Bracket onto the TEMPUS LS MONITOR....................................................................................17
Installation of the Bracket onto Tempus ls Monitor with smart mount .............................................................19
OPERATION GUIDE .............................................................................................................................................. 22
General Operating Guidelines for the Safety MD Transporter ..............................................................................22
Operating the Bracket on the Safety MD Transporter ............................................................................................23
Installing the Bracket onto the Safety MD Transporter..................................................................................23
Rotating the Bracket on the Safety MD Transporter ....................................................................................... 24
Removing the Bracket with the Medical Device from the Safety MD Transporter ....................................... 25
General Operating Guidelines for the Safety Arm System ......................................................................................26
Operating the Bracket on the Safety Arm System ...................................................................................................27
Installing the Bracket on the Standard Surface Base....................................................................................... 27
Rotating the Bracket on the Standard Surface Base......................................................................................... 27
Removing the Bracket from the Standard Surface Base .................................................................................. 28
PART NUMBERS ................................................................................................................................................... 29
Kits and Other Options ..............................................................................................................................................29
MAINTENANCE GUIDE......................................................................................................................................... 30
Cleaning the Bracket System ......................................................................................................................................30
Cleaning Process..................................................................................................................................................30
Cleaning Solutions...............................................................................................................................................30
Removal of Iodine Compounds ...........................................................................................................................31
Preventive Maintenance .............................................................................................................................................31
Lubrication ...........................................................................................................................................................31
Inspection Process and Schedule...............................................................................................................................32
Maintenance Program.........................................................................................................................................32
Inspection and Maintenance Record .........................................................................................................................33
Training Record ...........................................................................................................................................................34

www.technimount.com BP75 UG 202110-01 5
Table of Contents
Replacement Parts .......................................................................................................................................................35
WARRANTY .......................................................................................................................................................... 36
Warranty Policy ..........................................................................................................................................................36
LIMITED RESPONSIBILITY AND WARRANTY..................................................................................................................36
INTERNATIONAL WARRANTY CLAUSE ..........................................................................................................................36
Return Policy ...............................................................................................................................................................37
Prior to 30 Days ...................................................................................................................................................37
Prior to 45 Days ...................................................................................................................................................37
Prior to 60 Days ...................................................................................................................................................37
Return Authorization .................................................................................................................................................37
Damaged Merchandise ................................................................................................................................................38
Claim Process ..............................................................................................................................................................38
Required Information..........................................................................................................................................38
Findings and Conclusion .....................................................................................................................................38
questions about our policy ........................................................................................................................................38
SAE CERTIFICATION ............................................................................................................................................. 39

Return To Table of Contents
6BP75 UG 202110-01 www.technimount.com
Introduction
PURPOSE OF THE DOCUMENT

Pro Serie 75 for the Tempus LS monitor from Philips.
PRODUCT DESCRIPTION
                  


               





INTENDED USE OF THE PRODUCT

transport. It is designed to be installed on the equipment as described in this user guide. This equipment is for crew

use as outlined in this user guide. Please read this user gfuide thoroughly before using this equipment. To ensure the


www.technimount.com BP75 UG 202110-01 7
Return To Table of Contents
Introduction
POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE 75






Return To Table of Contents
8BP75 UG 202110-01 www.technimount.com
Introduction
SYMBOLS AND DEFINITIONS
SYMBOL DESCRIPTION
       
accompanying documents
Safe working load symbol and Load balance symbol
Pinch Point

www.technimount.com BP75 UG 202110-01 9
Return To Table of Contents
WARNING / CAUTION / NOTE

SYMBOL DESCRIPTION

          
          


         
not avoided, may result in minor or moderate injury to the user
          

device to avoid damage that may occur as a result of use or misuse.
NOTE 
Introduction

Return To Table of Contents
10 BP75 UG 202110-01 www.technimount.com
PRODUCT ILLUSTRATION
BRACKET PRO SERIE 75
Front View
Introduction
Rubber pads to
protect the medical
device from scratches




Tempus LS with a quick release
and locking mechanism

disc and Tempus LS when
placed on the ground

www.technimount.com BP75 UG 202110-01 11
Return To Table of Contents
PRODUCT ILLUSTRATION (CONTINUED)
BRACKET PRO SERIE 75 (CONTINUED)
Back View
Introduction



Technimount molded
polyurethane transport handle Bracket is made
from high-density
aluminum with black-


Return To Table of Contents
12 BP75 UG 202110-01 www.technimount.com
Introduction
SPECIFICATIONS
Product Name Bracket Pro Serie®75
Product Descripon            

Compability of Medical Device* Tempus® LS from Philips®
Environment of Usage 
Product Secon Material • 
• 
Steel Insert
Product Finish • 
• 
Environmental Regulaons Complying with RoHs 3
Temperature of Usage - 35° C to 45° C
Cercaon Tested in Compliance with:
• 
Designed to Comply with:
• §23
Installaon           
Mechanism
Aachment Opons 
Transportaon Compability Systems 
• Standard Surface Base
• 
• 
• Wall Mount System
• Safety MD Transporter
Features • 
• 
• Red Quick Release to Easily Insert and Remove the Medical Device
Physical Overall Dimensions Bracket Pro Serie®75
• Width 11.6 in, Depth 6.79 in, Height in 10.25 in
Bracket Pro Serie®75 - SMT
• Width 11.6 in, Depth 7.0 in, Height in 11.3 in
Weight • 4.85 lb - Bracket Pro Serie®75
• 5.1 lb - Bracket Pro Serie®75 - SMT
Part Numbers • 321-10-LS-RDT - Bracket Pro Serie®75
• 321-10-LS-RDT-SMT - Bracket Pro Serie®75-SMT
• 100-20-UN - Standard Surface Base
Other Models and Conguraon Opons           
customerser[email protected]



www.technimount.com BP75 UG 202110-01 13
Return To Table of Contents
Notice/Certification

§
(customerser[email protected]).
Technimount E.M.S. Holding Inc.

3770 Jean Marchand Street, Suite 100-C
Quebec (QC) G2C 1Y6
Canada
T + 1 888.639.2758
F + 1 855.339.6351
technimount.com
[email protected]





Return To Table of Contents
14 BP75 UG 202110-01 www.technimount.com
WARNING/CAUTION/NOTE



9
9Operate the bracket only as described in this user guide.
9Do not modify the Bracket, or any components of Technimount systems. Modifying the product can cause

9

with Technimount System products.
9

9


9
on a Wall Mount or Floor Mount. If not installed properly, the medical device could fall during transport and may

9

9

9
9

9

9


void the product warranty.
9Failure to properly clean or dispose of corrosive products will increase the risk of premature damage and may

9

Summary of Safety Precautions

www.technimount.com BP75 UG 202110-01 15
Return To Table of Contents
WARNING/CAUTION/NOTE (CONTINUED)

9

9Regularly inspect all components on the equipment for any issue and loose screws, bolts and nuts.
9

with Technimount Systems.
NOTE
9Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If such
products are used to clean Technimount equipment, the equipment must be rinsed with clean water and thoroughly


9

9


9
of the product.
9This user guide should be considered a permanent part of the Bracket, and should remain with the product even if
the equipment is subsequently sold.
9             

               
Customer Service or Technical Support at +1.888.639.2758.
Summary of Safety Precautions

Return To Table of Contents
16 BP75 UG 202110-01 www.technimount.com
Installation Guide
REMOVING THE PACKAGING FOR INSTALLATION
1. 
2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to

3. 
4. The Bracket System must work properly before being put into service.
5. 
TOOLS REQUIRED FOR INSTALLATION
                 
assistance, please contact our Technical Support team at techsuppor[email protected]
9Philips Screwdriver
NOTE
9
9

www.technimount.com BP75 UG 202110-01 17
Return To Table of Contents
1. The Bracket Pro Serie 75 is designed to be
installed on the Tempus LS monitor from Philips.
2. To install the Tempus LS monitor, pull the red
         

3. 

Installation Guide
INSTALLATION OF THE BRACKET ONTO THE TEMPUS LS MONITOR

18 BP75 UG 202110-01 www.technimount.com
Return To Table of Contents
INSTALLATION OF THE BRACKET ONTO THE TEMPUS LS MONITOR (CONTINUED)
4. 
5. 

6. The Tempus LS monitor is ready for EMS transport.
Installation Guide

www.technimount.com BP75 UG 202110-01 19
Return To Table of Contents
1. The Bracket Pro Serie®75 Smart Mount is
designed to be installed on the Philips Tempus LS
monitor.
2. To install the Tempus LS Smart Mount monitor,
pull the Red Quick Release Mechanism and raise

3.         

Installation Guide
INSTALLATION OF THE BRACKET ONTO TEMPUS LS MONITOR WITH SMART
MOUNT

Return To Table of Contents
20 BP75 UG 202110-01 www.technimount.com
Return To Table of Contents
INSTALLATION OF THE BRACKET ONTO THE TEMPUS LS MONITOR WITH SMART
MOUNT (CONTINUED)
4. 
5. 
6. Install the four Stainless Steel Flat Head Philips

7. Tighten all four screws.
8. Install the Tempus LS monitor onto the Smart
Mount as described in its user manual.
Installation Guide