peerless-AV DS-MBY942L-2X1 User manual

12014-05-01 #:126-9001-3 (2015-04-24)
DS-MBY942L-2X1 DS-MBY947L-2X1
ENG
200 lb
(91 kg)
MAX 200 lb
(91 kg)
MAX
40" - 42"
(102 - 107 cm) 46" - 48" (117 - 122 cm)

22014-05-01 #:126-9001-3 (2015-04-24)
This page intentionally left blank
ENG

32014-05-01 #:126-9001-3 (2015-04-24)
ENG - Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
product failure or personal injury. Be careful not to pinch fingers when operating the mount. For support please
call customer care at 1-800-865-2112.
WARNING
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
7/16"
(11mm)
3/8"
(10mm)
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at
least three full turns
and fit snug.
ENG
Do not overtighten screws.
ENG
Tools Needed forAssembly.
ENG
Display center.
ENG

42014-05-01 #:126-9001-3 (2015-04-24)
Parts (Before beginning, make sure you have all parts shown below).
ENG
A (2)
wall plate
Parts List DS-MBY942L-2X1
Part # DS-MBY947L-2X1 Part #Description Qty
Awall plate 2 146-1285 146-1286
Bleft adapter bracket 2 146-1021 146-1021
Cright adapter bracket 2 146-1020 146-1020
Dretaining collar 1 1800-375 1800-375
Elarge washer 1 540-9432 540-9432
FM5 x 16mm phillips screw 4 520-1189 520-1189
G1/4-20 x 1/2" phillips screw 4 510-9108 510-9108
HM6 x 12mm phillips screw 8 520-1128 520-1128
IM6 x 25mm phillips screw 8 520-1208 520-1208
JM8 x 12mm phillips screw 8 520-9571 520-9571
KM8 x 25mm phillips screw 8 520-1031 520-1031
L5/16" flat washer 16 540-9406 540-9406
M1/4" spacer 16 600-1215 600-1215
N4mm allen wrench 1 560-9646 560-9646
Ocable tie 6 560-9711 560-9711
Pmain frame 1 146-1048 146-1048
Qmain post 1 146-1052 146-1052
Rcarriage bolt 4 520-1175 520-1175
Ssmall washer 4 540-9440 540-9440
Tnylock nut 4 530-9413 530-9413
Uhex head screw 12 520-1321 520-1321
V#10 x 1/2" phillips screw 2 520-1320 520-1320
WM5 x 10mm socket pin screw 1 520-1164 520-1164
C (2)
right adapter bracket
B (2)
left adapter bracket
F (4)
M5 x 16mm G (4) 1/4-20 x 1/2" H (8) M6 x 12mm
E (1)
large washer
D (1)
retaining collar
I (8)
M6 x 25mm

52014-05-01 #:126-9001-3 (2015-04-24)
O (6)
cable tie
N (1)
4mm allen wrench
P (1)
main frame Q (1) main post
S (4)
small washer T (4) nylock nut
R (4)
carriage bolt U (12) hex head screw
W (1)
M5 x 10mm socket
pin screw
V (2)
#10 x 1/2" phillips
screw
J (8)
M8 x 12mm K (8) M8 x 25mm L (16) 5/16" flat washer M (16) 1/4" spacer

62014-05-01 #:126-9001-3 (2015-04-24)
1
T (4)
R (4)
P
P
S (4)
7/16"
(11mm)
2-1
ENG Extension column (sold separately)
Q
Q

72014-05-01 #:126-9001-3 (2015-04-24)
2-2
2-3
ENG Align slot of extension column.
N
ED
W
SLOT
2-4
V (2)

82014-05-01 #:126-9001-3 (2015-04-24)
3-1
U (12)
A (2)
3-2
3/8"
(10mm)
G (2)
A (2)
G (2)

92014-05-01 #:126-9001-3 (2015-04-24)
4-1 4-2
N
F
B,C
B,C
ENG Remove ENG Replace
ENG OPTIONAL

10 2014-05-01 #:126-9001-3 (2015-04-24)
X
X
5
Center adapter brackets vertically on back of screen.
ENG CB
6
ENG Use of spacers is OPTIONAL.
x3
I,K
L
M (2)
L
J
LI,K
M
H
L