Vivo STAND-TV02PB User manual

Mobile Portrait to Landscape TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv02pb
SKU: STAND-TV02PB/PW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x4)
Caster
C(x2)
Base Pole
I (x1)
Rear Cover
J x2)
VESA
Extension
K(x2)
VESA
Extension
L (x4)
Cable Cover
H(x1)
Mounting
Plate
D (x2)
Upper Pole
E (x1)
Equipment
Shelf
F (x2)
Shelf Mounting
Bracket
G (x1)
Front Cover
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-B (x8)
M6x8mm
Screw
S-A (x8)
M8x20mm
Screw
S-C x16)
M6x12mm
Screw
T-C (x1)
4mm Allen
Wrench
T-D (x1)
5mm Allen
Wrench
T-A (x1)
6mm Wrench
M-A (x4)
M6x14mm
Screw
N (x5)
Cable Tie
M-B (x4)
M8x16mm
Screw
M-C (x4)
M6x30mm
Screw
M-D (x4)
M8x35mm
Screw
M-E (x4)
M8 Washer
M-F (x4)
Small Spacer
M-G (x4)
Large Spacer
S-D x1)
M6x18mm
Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
154lbs
(70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 11 lbs
(5 kg)
TV DVD SHELF
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
S-E (x8)
M8x8mm
Screw
M (x5)
Cable Tie
Holder
T-B (x1)
10mm Wrench

3
ASSEMBLY STEPS
STEP 1
Press the lock on each Caster (B) to the down (locked) position, then install the Casters to the Base (A).
Adjust to sit flat if needed, then tighten each caster using the 10mm Wrench (T-B).
TOOLS NEEDED
Phillips
Screwdriver
Wrench
STEP 2
Slide the Base Poles (C) into the Base (A),
making sure the cable holes are facing
towards the back, then secure the Poles
using M8x20mm Screws (S-A). Turn the
bolts using the 5mm Allen Wrench (T-D),
but do not yet tighten.
Needle Nose
Pliers
STEP 3
Slide the Shelf Mounting Brackets
(F) onto the base poles. Insert
the Upper Poles (D) into the Base
Poles, making sure the cable
holes are facing in towards the
center, then secure the poles using
M6x8mm Screws (S-B). Tighten
with the 4mm Allen wrench (T-C).
T-B
T-D
S-A
S-B T-C

4
STEP 4
Slide the Shelf Mounting
Brackets (F) up to cover the
installed scrws, then insert
M6x12mm Screws (S-C) to
secure the brackets. Tighten
with a Phillips screwdriver.
STEP 5
1. Install Front Cover (G) between poles,
making sure the face of the cover is
facing towards the front, and secure
using M6x12mm Screws (S-C). Tighten
with a Phillips screwdriver.
2. Place Equipment Shelf (E) on the
Shelf Mounting Brackets, making sure
the large end faces towards the back.
3. Secure the shelf using M6x12mm
Screws (S-C) and tighten with a Phillips
screwdriver.
4. Tighten the previously installed
M8x20mm Screws (S-A) under the base
using the 5mm Allen Wrench (T-D).
STEP 6
OPTION A: VESA 200x200mm - 400x400mm
S-C
F
S-C
F
S-C
T-D
H
S-A
Install the Mounting Plate (H) to the
TV. For flat back TVs, use shorter
screws (M-A, M-B) with M8 Washers
(M-E). For curved or recessed back
TVs, use longer screws (M-C, M-D)
with M8 Washers (M-E) and Spacers
(M-F, M-G) as needed.

5
STEP 6 (Continued)
OPTION B: VESA 600x200mm - 600x400mm
Attach VESA Extensions (J, K) to the Mounting Plate (H) using M8x8mm Screws (S-E), and tighten
with the 5mm Allen Wrench (T-D). Install the assembled mounting plate to the TV. For flat back TVs,
use shorter Screws (M-A, M-B) with M8 Washers (M-E). For curved or recessed back TVs, use longer
Screws (M-C, M-D) with M8 Washers (M-E) and Spacers (M-F, M-G) as needed.
STEP 7
Partially insert M8x20mm Screws
(S-A) into the top hole on each
upper pole, leaving 10mm (about
3/8”) of thread exposed. Hang
the slots of the mounting plate
with TV over the bolts.
H
J
K
K
J
T-D
T-D
S-E
S-E
S-A

6
Insert M8x20mm Screws (S-A) into either the front or rear lower holes of the mounting plate. Tighten
all screws with the 5mm Allen Wrench (T-D).
STEP 8
To adjust the ease of
rotation, loosen or tighten
the nuts on the back of the
mounting plate using 6mm
Wrench (T-A).
STEP 9
To lock the position, insert the M6x18mm Screw (S-D) into the back of the mounting
plate using a Phillips screwdriver. Use the side hole for portrait, or the top hole for
landscape.
STEP 10
Route cables through the cable holes in the poles and the openings in the front cover and mounting
plate. Stick adhesive Cable Tie Holder (M) onto the back of the mounting plate in the positions
shown. Pull excess cable up into the mounting plate area, making sure there’s enough slack for free
rotation of the TV if needed, and secure to the tie holders on the side using Cable Ties (N).
STEP 11
T-D
S-A
T-A
M
N
S-DS-D

7
STEP 11 (Continued)
Place a power strip in the back of the
mounting plate, and secure using
Cable Ties (N).
STEP 12
Install Cable Covers (L) to the cables holes
in the poles, using pliers to break out
sections for x2 or x3 cables if needed.
STEP 13
Place the Rear Cover (I) onto the back of the mounting plate and secure using M6x12mm
Screws (S-C). Tighten with a Phillips screwdriver. Unlock the casters to freely roll the
assembled cart.
NN
L
S-CS-C
S-CS-C

LAST UPDATED: 11/20/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303