TechniSat Digit HD 8SX Manual

Digital HD series
PL
With CONAX card reader and two PCMCIA interfaces for use
with CI modules, as well as a card reader for use with SD, MMC,
MS and CF cards. Unit receives free-view and encrypted (e.g.
VIACCESS, CONAX, IRDETO, SECA etc.) satellite programs
Short instructions
TechniSat DVB-S
EN

2
Menu
Media Player
Wake up timer
Timer settings
TV-SCART mode
VCR- SCART- mode
OSD
Standby clock
Zoom
Audio language
Subtitle language
HDMI-resolution
Screen format
Smartcart 2
Protection of minors
Timer overview
Picture settings
Antenna settings
System configuration
Service settings
Sound settings
Basic settings
Program journal
Main menu
Menu language
CI Slot 2
Delete all programs
Smartcart 1
TV-Lists organising
Timer organising
Video rec. timer
Update software
Update Channel list
Channel searching
Automatic Search
Transponder
Manual Search
Satellite
Radio-Lists organising
Settings
Conditional access
Dolby Digital
AV synchronism
HDMI audio format
Special functions
R
estore
f
actory
settings
Channel change timer
CI Slot 1
Time zone
Country
Date/Time
IRC code
Quickstart
Music
Pictures
Movies

3
Contents
Disposal advice ....................................................................................................................4
Safety advice........................................................................................................................4
When not in operation ..........................................................................................................4
Connecting the DVB receiver ...............................................................................................5
Help: ....................................................................................................................................6
Initial installation ...................................................................................................................7
For daily use.........................................................................................................................7
Switching on and off .............................................................................................................8
Channel selection.................................................................................................................8
Using the channel up/down keys..........................................................................................8
Using the numeric keys ........................................................................................................8
Using the channel list: ..........................................................................................................8
Optional channels.................................................................................................................8
Additional channel information .............................................................................................8
Volume control......................................................................................................................9
TV/Radio switching...............................................................................................................9
Access Electronic Channel Guide (EPG): ............................................................................9
Exit EPG...............................................................................................................................9
Function selection.................................................................................................................9
MP3 playback.......................................................................................................................9
Image playback ..................................................................................................................10
Film playback...................................................................................................................... 11
Sort Channels / Configure Favourites List..........................................................................12
Exit menus..........................................................................................................................14
EN

4
Disposal advice
The packaging for your unit consists entirely of recyclable material. Please sort the items ap->
propriately for disposal via your local waste disposal system. Please note that spent batteries
(from the remote control) as well as electronic components should not be disposed of in your
household refuse, but in accordance with your local regulations (special waste, handing back
to the outlet where purchased).
Safety advice
For your own protection, please read the safety instructions carefully before commencing
operation of your new unit. The manufacturer accepts no responsibility for damage caused by
inappropriate operation, or by non-compliance with safety precautions.
To ensure sufficient ventilation, position the device on a flat, even surface and do not place>
any objects on the lid of the device. This surface has ventilation slots that ensure heat can
escape from inside the unit.
Do not place any burning objects, such as burning candles, on top of the unit.>
Do not subject the unit to water spray or droplets, and do not place any objects filled with>
liquid, e.g. vases, on top of the unit.
The unit may only be operated in a temperate climate.>
Never open the housing unit! You will be in danger of receiving an electric shock. Any neces->
sary repairs should be carried out only by qualified service personnel. In the following cases,
you should disconnect the unit from the mains power supply, and consult a qualified techni-
cian:
the mains cable or the mains plug is damaged>
the unit was exposed to liquid, or liquid has run into the unit>
in case of significant malfunction>
in case of severe external damage>
When not in operation
During an electrical storm, or when the unit will not be used for a lengthy period of time (e.g. while
you are on holiday), disconnect the unit from the mains power supply.

5
On / Standby Arrow keys
OK button
SIM card reader
SIM card
reader
USB socket Compact
flash
reader
Alphanumeric display
Slot
CI module 1
CI module 2
Slide the CONAX Smartcard (golden chip facing down
and positioned in direction of insertion) until it is firmly
inserted in the card reader.
Important
operating
instructions
The operation of
the digital receiver
is simplified by
the use of the “On
Screen Displays”,
which also serves to
reduce the number
of keys required on
the remote control
unit. All functions
are displayed on the
screen, and can be
operated with a few
keys. Related func-
tions are combined
in a “MENU”. The
function selected is
highlighted in colour.
The “function keys”
red, yellow, green
and blue are indica-
ted by colour bars
in the bottom line.
These colour bars
represent different
functions in the va-
rious menus, which
will be activated by
pressing the appro-
priate coloured key
(multifunction key)
on the remote con-
trol. The “Function
keys” are only active
when a brief descrip-
tion is displayed in
the appropriate field.
Inserting the CI module:
Follow the instructions of the manufacturer of the CI module and card.>
Slide the desired smart card into the relevant CI module.>
Now carefully slide the CI module into the appropriate slot.>
EN
Mute
Remote control option
(Code+OK at the same time)
Numeric keys
Multifunctional keys
Back
Video text on/mix/off
Menu On/Off
TV/Radio
Info
Recording
Channel +/-
Volume +/-
Stop/Freeze frame
Sleep timer
Option button
On/Standby
OK/Channel list
On/Off
Arrow keys left/right
Volume +/-
Playback functions
EN

6
Mains connection
The digital receiver should only be connected to the mains supply when all the accompanying
accessories have been properly connected to the device. This will help avoid any risk of damage to
the digital receiver or other components.
a. After you have made all connections in accordance with the following points, connect the
receiver using the enclosed power cable to a mains socket of 230 V / 50-60 Hz.
Please note: The device includes a power switch on the rear to cut off the device from the mains
supply.
External unit
b. Connect the LNB input of the digital receiver using a suitable coaxial cable with your external
unit.
Connection to a television set
c. Connect the receiver (HDMI output) and TV (HDMI input) via an HDMI cable. If your TV is
suitably equipped, it will automatically switch to the HDMI input when the digital receiver is
switched on.
Or:
d. Connect the receiver (component output) and TV (component input) via a component cable.
Alternatively:
e. Use a SCART cable to connect the receiver (SCART socket TV) with the television set
(SCART socket). If your television set is appropriately equipped, it will automatically switch to AV,
and thus to satellite operation, when the digital receiver is switched on. Where applicable, it may
be necessary to adapt the type of signal for your television set.
Videorecorder
a. Mains connection
b. Connecting LNB 1 with LNB
Input 1 of the DVB receiver.
c. Scart connection between the
DVB receiver and the
television set.
d. Connecting the component
socket of the DVB receiver to
the component socket of the
TV set.
e. Scart connection between the
DVB receiver and the
television set.
f. Scart connection from a video
player to the VCR Scart
socket of the DVB receiver.
g. Connecting the Audio outputs
with a HiFi-/Surround system.

7
Video cassette recorder (VCR)
f. Connect the video recorder to the SCART socket VCR. During playback, the video recorder
applies a signal voltage via the SCART to the digital receiver. This allows the video recorder
signal to automatically reach the SCART socket TV (not via the HDMI output) and hence the
TV set, provided this is connected via SCART. If your video recorder does not include switching
voltage, use the 0/AV button to switch your digital receiver to the external VCR input. Pressing
this button again will allow you to revert to normal operation.
Help:
Where available in the menus, pressing the blue function key will cause a help text to be
displayed, pressing again will remove the text from the screen.
Initial installation
When switching on the unit for the first time, a start window will be displayed, with the
installation assistant AutoInstall. Please follow the instructions displayed on screen.
You can abort the initial installation at any time simply by pressing the red function key. Press
the green function key to go back to the previous step in the installation procedure. Thus any
entries made incorrectly can be quickly corrected. If you do not implement the initial installation,
or if it is not completed, the receiver will commence operation with a standard pre-programmed
configuration.
Antenna configuration
In this installation step you can adjust the digital receiver to the configuration of your antenna.
If you wish to accept the standard antenna setting, use the arrow keys up/down to high->
light the field Standard and confirm by pressing OK.
If the configuration of your receiving installation does not correspond with the standard>
setting, highlight the field Manual and confirm by pressing OK.
DiSEqC
If you have DiSEqC components in your receiving installation, highlight the field Activate>
and confirm by pressing OK.
Position A/Option A
Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC>
setting Position A/Option A and confirm by pressing OK.
Position B/Option A
Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC>
setting Position B/Option A and confirm by pressing OK.
Position A/Option B
Use the Arrow keys up/down to highlight the satellite you wish to receive with the DiSEqC>
setting Position A/Option B and confirm with the OK button.
EN

8
Position B/Option B
Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC>
setting Position B/Option B and confirm by pressing OK. In the next step, you should
check on the correct configuration of your antenna.
If you wish to accept the settings entered, use the arrow keys up/down to highlight the>
field Yes, and confirm by pressing OK.
Position A/Option B
Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC>
setting Position A/Option B and confirm by pressing OK.
Position B/Option B
Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC>
setting Position B/Option B and confirm by pressing OK. In the next step, you should
check on the correct configuration of your antenna.
If you wish to accept the settings entered, use the arrow keys up/down to highlight the>
field Yes, and confirm by pressing OK.
For daily use
Switching on and off
Press the On/Standby key either on the digital receiver or the remote control to switch the>
receiver on.
Press the same key again to switch the receiver off again.>
Channel selection
Using the channel up/down keys
Use the channel up/down keys on the remote control or on the receiver to move up or>
down the list one channel slot at a time.
Return to the last channel selected
Pressing the Back key on the remote control will take you back to the last channel se->
lected.
Press the key again to return to the channel previously selected.>
Using the numeric keys
You may use the numeric keys to enter the desired channel number.
For example: 1 for channel 1
1, then 4 for channel 14
2, then 3, then 4 for channel 234

9
When entering a channel number consisting of several digits, you have approx. 3 seconds after
pressing each number to complete the entry. If you wish to enter a number consisting of only one
or two digits, you can speed up the switching procedure by holding the key down on the last digit.
Using the channel list:
Press the OK key.>
Now use the arrow keys up/down to highlight the desired channel.>
Press the OK key to display the highlighted channel.>
Use the arrow keys up/down to move the highlighter in the list by one line at a time.>
Use the arrow keys left/right to move back and forth in the list one page at a time.>
Optional features
Certain programmes offer the possibility of optional features. This function makes it possible for
you, e.g. during a sports broadcast, to freely select from various camera perspectives (Form 1)
or to select from a range of different sporting broadcasts (Bundesliga football). If a programme
includes optional features, this will be indicated.
To select one of the possible options, press the option button. A selection window showing the>
available options will be displayed.
Use the arrow keys up/down to highlight the desired option, and confirm by pressing OK.>
Select start time
On certain channels, you can select individual films with different start times. These films are
available on a round the clock basis at different start times. If a channel features selectable start
time, this will be indicated.
To select one of the possible start times, press the option button. A selection window showing>
the start times offered will be displayed.
Use the arrow keys up/down to select the desired start time.>
Confirm by pressing OK.>
Provided the broadcast for the selected start time is available, you can view this at the desired
time.
Additional programme information
Each time you change channels, an information box will be displayed briefly, showing the
channel and the name of the programme selected. In addition, other programme properties will
be indicated, such as for Video text, widescreen broadcasts and encrypted channels. If a TV
broadcast is available in multiple languages or with multiple audio channels, or if multiple radio
channels are available on a single radio station , this will be displayed on the screen. You may then
proceed as follows to select a different language or a different audio channel:
Press the Option key. A list will now be displayed on screen, indicating the languages current->
ly available.
Use the arrow keys up/down to highlight the desired language or the desired radio station and>
confirm by pressing OK. You may now listen to the programme in the language selected. Your
digital receiver is also equipped to receive monaural programmes.
EN

10
Use the arrow keys left/right to choose between Mono channel 1, Mono channel 2 and stereo.>
Volume control
Adjust the volume of your digital receiver using the Volume + key to increase the volume, and>
Volume – to decrease the volume.
Press the Mute key to switch the sound on or off.>
TV/Radio switching
By pressing the TV/Radio button, you can switch between TV and Radio operation.>
Access Electronic Programme Guide (EPG):
Press the SFI/EPG key on the remote control of the digital receiver. The Electronic Pro->
gramme Guide then appears on the screen. The channels you have selected in menu >
settings > programme journal, or those of the factory default settings, will be shown with
their current programmes. You can now also use the EPG function to obtain information on
the contents of various programmes. In addition, you may use the EPG functions to select a
particular programme, to pre-select a programme, or to set a timer for a programme.
Exit EPG
Press either the Menu or the TV/Radio key to return to normal operation.>
Function selection
Press the blue function key, to open the Navigation menu (NAV menu).>
Use the Arrow keys up/down to highlight the function, which you wish to access.>
TV: TV operation: Internal receiver.
Radio: Radio operation: Internal receiver.
Films: Film navigator: Calling up film data saved on a connected USB
device, an SD card or a CompactFlash card.
Music: Music navigator: Calling up MP3 tracks saved on a connected USB
device, an SD card or a CompactFlash card.
Image Image navigator: Calling up JPEG files saved on a connected USB device,
an SD card or a CompactFlash card.
To select the highlighted function, confirm by pressing OK.>
MP3 playback
With your receiver, you can play back data, which is saved in MP3 format on a USB device, or
an SD card or a CompactFlash card. The USB device, SD card or CompactFlash card should be
formatted based on the FAT32 file system.

11
Press the blue function key NAV Menu.>
Use the arrow keys up/down to highlight the line Music.>
By pressing OK, the selection of the source medium is now displayed.>
Use the arrow keys up/down to select the source from which you wish to play back the MP3>
files.
By pressing OK, a list now appears with the MP3 files contained on the USB device.>
Use the arrow keys up/down as applicable to initially highlight the folder, which contains the>
desired MP3 file, and confirm by pressing OK.
Use the arrow keys to select from the list the MP3 file you wish to play first, and confirm by>
pressing OK. The file selected will now be played. Thereafter the other files located on the
same source medium will be played automatically.
Track information
By pressing the Info button, further Information concerning the selected track is displayed,>
provided its title is included in the ID3 tag.
Press this button again, and the information will disappear.>
Skipping titles/tracks
By pressing the arrow keys up/down, you can jump forward or backward by one track. The file>
selected will now be played. Thereafter the other files located on the same source medium
will be played automatically.
Pause
By pressing the Pause / Play button, playback is halted (Pause).On the display, this is indica->
ted by _II.
Press the button again to resume playing the file from this position.>
Fast Forward and Rewind
During playback, press Fast Forward or Rewind, several times if applicable, to advance or>
rewind the track at 4x, 16x or 64x normal speed. The display will show the relevant setting via
Fast Forward >>, Fast Forward >>>, Fast Forward >>>
or Rewind <<, Rewind <<<, Rewind <<<<.
While using the 64x speed, press the Fast Forward or Rewind button to go forwards or back->
wards in 10 minute steps.
Once the desired portion has been reached, you can access normal playback by pressing the>
Pause / Play key.
Go up one folder level
During playback operation, first press the Stop button to reactivate the navigator.>
Now, to go one level up from the present folder, press the Back button.>
Stop
To end playback and switch the device back to Standby mode, press the On/Standby button.>
EN

12
MP3 Playback mode
As well as the normal playback mode, the following functions are also available:
- Random playback of all tracks in the selected folder
- Playback of a single track
- Playback of titles from a selected folder
The various playback modes can be accessed as follows:
Press the Option key. A window appears for the selection of the playback mode.>
Use the arrow keys up/down to highlight the desired playback mode, confirm by pressing OK.>
To activate the random playback function, press the Option key again and use the Arrow keys>
up/down to select the entry On.
Subsequently confirm by pressing OK.>
Image playback
With your receiver, you can display data, which is saved in JPEG format on a device connected via
the USB socket or a card inserted into the card reader. The USB device should be formatted using
the file system FAT 32.
By pressing the blue function key Functions, the NAV menu opens.>
Use the arrow keys up/down to highlight the line Pictures and confirm by pressing OK.>
Use the arrow keys up/down to select the source from which you wish to view the picture>
files, and confirm by pressing OK. A list showing the picture files available on the USB device
or the inserted cards will be displayed.
Use the arrow keys up/down as applicable to initially highlight the folder, which contains the>
desired image file, and confirm by pressing OK.
Use the arrow keys up/down to select from the list of JPG files, which you can view and con->
firm with OK. The picture selected will now be displayed in large format.
Show next/previous picture
Press the arrow keys up/down to skip to the next or previous picture.>
Rotate image
By pressing the blue or red function key, the image can be rotated in a clockwise or anticlock->
wise direction.
Go up one folder level
When an image is displayed, first press the Stop button, to reactivate the navigator.>
To go one level upward from a folder, use the Arrow keys to highlight the topmost line, which>
is indicated by a symbol, and confirm with OK or
Press the Back key.>
Stop/End playback
To stop playback and revert to normal operation, press the TV/Radio button.>

13
Slideshow
It is possible to view images in the form of a slideshow. This function allows images to be shown
automatically one after the other on the screen.
Use the Arrow keys up/down to select the JPG files from the list, with which the slideshow>
should start.
By pressing the yellow function key Slideshow, all the images of a folder or playlist are auto->
matically played one after the other, starting with the highlighted image.
Pause
Press the Pause / Play key to stop the playback operation (Pause). This is indicated by Pau->
se on the display.
Press the key again to resume playback.>
Show next/previous picture
Press the arrow keys up/down to skip to the next or previous picture more quickly.>
Adjusting image changeover speed
By pressing the Arrow keys right/left, you can adjust the image changeover speed to between>
5 and 100 seconds. Please note, for large files and short interval times, it may be impossible
to display all of the images in the time allowed. If the specified image changeover time is too
short for the images, the picture is displayed after it has finished being read.
Rotate image
By pressing the blue or red function key, the image can be rotated in a clockwise or anticlock->
wise direction.
End slideshow
To end the slideshow, press the Stop key. To activate the navigator or>
To revert back to normal operation, press the TV/Radio key.>
Film playback
With your receiver, you can display data, which is saved in MPEG format on a device connected
via the USB socket or a card inserted into the card reader. The USB device should be formatted
using the file system FAT 32.
By pressing the blue function key Functions, the NAV menu opens.>
Use the arrow keys up/down to highlight the line Films and confirm by pressing OK.>
Use the arrow keys up/down to select the source from which you wish to view the Film files,>
and confirm by pressing OK. A list showing the film files available on the USB device or the
inserted cards will be displayed.
Use the arrow keys up/down as applicable to initially highlight the folder, which contains the>
desired film file and confirm by pressing OK.
Use the arrow keys up/down to select from the list of MPEG files, which you wish to view>
and confirm with OK. The film selected will now be played. The indication “Playback_” will be
displayed.
EN

14
Pause/Still picture
To halt the playback of a recording (still picture), during playback, press the Pause / Play key>
or the Still picture button. The symbol „Pause >II“ will be displayed.
Press the relevant key again to restart the playback from the same position.>
Fast Forward and Rewind
To access a specific portion of a film, your device includes variable speed Fast Forward and
Rewind functions.
During playback, press the Fast Forward or Rewind key. The display indicates “Fast Forward>
>>” or “Rewind <<”. The recording will now be run at 4x normal speed in the desired direction.
Press the Fast Forward or Rewind key again and the speed increases to 16x. The display>
indicates “Fast Forward >>” or “Rewind <<”.
Press the Fast Forward or Rewind key again and the speed increases to 64x. The display>
indicates “Fast Forward >>” or “Rewind <<”.
Once the desired portion of the recording has been reached, you can access normal play->
back by pressing the Pause / Play key.
Zoom
Press the Zoom key first. A zoom selection screen then appears.>
By pressing the Zoom or Arrow keys right/left repeatedly, the various zoom factors can be>
adjusted.
Exit zoom selection by pressing the Back button.>
End playback
To exit playback, press the Stop key. The playback will be ended and your receiver will revert>
to the Film navigator.
Sort Channels / Configure Favourites List
This chapter describes how you can change the pre-programming of your digital receiver as well
as the Favourites channel list in accordance with your own preferences. This function is also
required to sort new found channels into the channel list after a channel scan has been performed.
In this regard you should know the following: your receiver is equipped with two channel lists,
the Favourites list and the Total list. The Favourites channel list includes all the channels you
have accepted into the list according to the procedure described below. The Total list includes all
channels.

15
Calling up channel list management
To customise the Favourites list, proceed as follows:
Press the Menu key to display the Main menu.>
Use the arrow keys up/down to highlight the line Manage TV lists, in order to work on the TV>
list, or Manage Radio lists, in order to work on the radio list.
Confirm by pressing OK. The channel list management required to work on the respective>
Favourites list will be displayed (TV or Radio list). The Favourites list will be displayed on the
right half of the screen. This is now active, with the currently selected channel being high-
lighted. The alphabetically sorted Total list will be displayed on the left half of the screen. The
Total list includes all available channels.
Press the red function key to move the highlighter to the Total list. This is now active.>
Press the red function key again to open a selection window. Here, you have the> option of
sorting the Total list according to various selection criteria (e.g. all channels, all free-to-air, all
new channels, all channels found, all English channels, etc.) or sorted by Provider.
Use the arrow keys up/down to select the desired channel list (e.g. Total list).>
Confirm by pressing OK. An additional selection window will now be displayed.>
Now use the arrow keys up/down to specify the selection criterion according to which the>
Total list is to be sorted.
Select e.g. All broadcasters, to display all available channels in the overall list or All new, to display
only newly found channels since the last search was carried out or All English, to display only
English language channels.
Confirm by pressing OK. Now, depending on your selection, a channel list containing e.g.>
all channels, all new or all English-language channels will be displayed. Channels already
included in the Favourites list are indicated by a check-highlighter.
Press the red function key Channels and the green function key TV List to switch back and>
forth between the Favourites list and the Total list. The currently active list will be indicated by
a blue highlighter.
Adding channels to the Favourites list
To accept channels from the Total list into the Favourites list, call up the channel list manager as
described above, and go to the Total list.
Press the blue function key Functions. A selection window showing the available functions will>
be displayed.
Use the arrow keys up/down to highlight the item Add.>
Confirm by pressing OK.>
Use the arrow keys up/down to highlight a channel you wish to accept into the Favourites list.>
Press the yellow function key Add to accept the highlighted channel into the Favourites list.>
Highlighting blocks of channels
To highlight several channels simultaneously, proceed as follows:
Press the OK key to go to the selection mode. The highlighted channel will be indicated by a>
cross on the left of the channel.
You may now use the arrow keys up/down to highlight the previous or following channels as>
well.
When you have highlighted your selected channels in this way press the yellow function key,>
Add, to include the highlighted channels in the Favourites list.
EN

16
Deleting channels
To delete channels from the favourites list, access the channel list management. The Favourites
list will be displayed and active.
Press the blue function key Functions. A selection window showing the available functions will>
be displayed.
Use the arrow keys up/down to highlight the line Remove.>
Confirm by pressing OK.>
Use the arrow keys up/down to highlight a channel you wish to delete from the list.>
Press the yellow function key Delete. The inquiry “Remove channel/s from the list?”>
appears”.>
Use the arrow keys left/right to highlight Yes or No.>
Confirm by pressing OK.>
The channels deleted in this manner will, however, remain in the Total list, and can be added to the
Favourites list again at any time.
Deleting from the Total list
To remove channels from the Total list, proceed as described above. However, after calling up the
channel list management, press the red function key Channels to first switch to the Total list, then
select the function Delete.
Sorting channels
To sort the order of channels in the Favourites list according to your preferences, call up the
channel list manager. The Favourites list will be displayed and active.
Press the blue function key Functions. A window showing the available functions will be>
displayed.
Use the arrow keys up/down to highlight the line Sort.>
Confirm by pressing OK.>
Use the arrow keys up/down to highlight the channel, which you wish to place at another>
position on the list.
Now press the yellow function key Sort. A double arrow will appear next to the channel se->
lected.
Now use either the arrow keys up/down or the numeric keys to place the channel in the>
desired position in the channel list.
Press the yellow function key Sort to enter the new position of the channel into memory.>
Exit menus
Press the TV/Radio key to return to normal operation.
Further information available on the web at www.technisat.com
2233630000400

Digit HD 8SX
PL
Cyfrowy odbiornik satelitarny posiada czytnik kart CONAX
i dwa interfejsy PCMCIA do zastosowania z modułami CI,
a także czytnik kart do kart SD, MMC, MS i CF. Do odbioru
niekodowanych, bezpłatnych oraz kodowanych, płatnych
(np. VIACCESS, CONAX, IRDETO, SECA itp.) programów
satelitarnych
Skrócona instrukcja
obsługi odbiornika DVB-S
Cy
fr
ow
y
od
bi
or
ni
k
sa
te
li
ta
rn
y
po
si
ad
a
cz
yt
ni
k
ka
rt
C
ON
AX

2
Menu
Tryb VCR- SCART
OSD
Media Player
Nowy timer zaczania
Usunicie wszystkich programów
Aktualizacja listy programów
Aktualizacja oprogramowania
Tryb TV-SCART
CI Slot 1
Zegar czuwania
Tryb powikszenia
Jzyk audio
Jzyk napisów
Rozdzielczo HDMI
Format obrazu TV
Ustawienia video
Ustawienia anteny
Konfiguracja systemu
Ustawienia fabryczne
Ustawienia audio
EPG
Menu gówne
Jzyk menu
CI Slot 2
Smartcart 1
Organizacja list TV
Organizacja timera
Nowy timer nagrywania
Ustawienia timera
Smartcart 2
Przegld timerów
Wyszukiwanie programów
Wyszukiwanie automatyczne
Transponder
Wyszukiwanie rczne
Satelita
Ustawienia
Ustawienia podstawowe
Kontrola rodzicielska
Dostp warunkowy
Dolby Digital
Synchronizacja AV
Format dwiku HDMI
Specjalne funkcje
Ustawienia fabryczne
Nowy timer zmiany kanau
Organizacja list radia
Strefa czasowa
Kraj
Data/Czas
Kod pilota
Szybki start
Muzyka
Zdjcia
Filmy

3
Spis treści
Wskazówki dotyczące odpadów .......................................................................................5
Wskazówki dotyczące bezpieczeństwa ..............................................................................5
Kiedy wyłączyć odbiornik ....................................................................................................5
Podłączenie odbiornika ......................................................................................................7
Pierwsza instalacja .............................................................................................................8
Codzienne użytkowanie ......................................................................................................8
Włączanie i wyłączanie odbiornika .....................................................................................8
Wybór kanałów .................................................................................................................8
Powrót do ostatnio wybranego kanału ................................................................................9
Przyciski numeryczne .........................................................................................................9
Lista kanałów ......................................................................................................................9
Dodatkowe opcje kanałów ..................................................................................................9
Wybór czasu emisji .............................................................................................................9
Regulacja Głośności .........................................................................................................10
Zmiana TV/ Radia .............................................................................................................10
Elektroniczny Przewodnik po Programach (EPG) ............................................................10
Wyjście z funkcji EPG .......................................................................................................10
Wybór funkcji ....................................................................................................................10
Odtwarzanie plików MP3 ..................................................................................................10
Odtwarzanie plików JPG ..................................................................................................12
Odtwarzanie filmów ..........................................................................................................13
Organizacja list kanałów/ Tworzenie listy ulubionych .......................................................13
Wyjście z menu ...............................................................................................................15
PL

4
Wskazówki dotyczące odpadów
Opakowanie urządzenia wykonane jest z surowców wtórnych. Niepotrzebne elementy>
opakowania należy odpowiednio posortować i wyrzucić zgodnie z lokalnymi przepisami do
specjalnie oznakowanych pojemników.
Po zakończeniu okresu użyteczności odbiornika nie należy wyrzucać go w taki sposób, jak
zwykłe odpady gospodarstwa domowego. Niepotrzebny odbiornik oraz zużyte baterie należy
zanieść do punktu zbiórki zużytego sprzętu elektrycznego i elektronicznego, zgodnie z lokal-
nymi przepisami.
Wskazówki dotycząc bezpieczeństwa
W trosce o własne bezpieczeństwo należy starannie przeczytać instrukcję obsługi przed
przystąpieniem do instalacji urządzenia. Producent nie ponosi odpowiedzialności za szkody
powstałe w wyniku niewłaściwej instalacji i nie stosowania się do wskazówek bezpieczeństwa.
W celu zagwarantowania odpowiedniej wentylacji należy ustawić urządzenie na płaskiej i>
równej powierzchni oraz go nie przykrywać. Na górze obudowy urządzenia znajdują się otwo-
ry wentylacyjne, które odprowadzają na zewnątrz ciepło powstałe w czasie pracy urządzenia.
Nie należy stawiać na urządzeniu żadnych przedmiotów łatwopalnych>
Należy chronić urządzenie przed kontaktem z woda i innymi płynami oraz nie stawiania na>
nim pojemników zawierających płyny ( Np. wazon z woda)
Urządzenie jest wrażliwe na zmiany temperatury. Miejsce instalacji powinno mieć w miarę>
stałą temperaturę.
Nie należy pod żadnym pozorem otwierać urządzenia, grozi to porażeniem prądem. Wszelkie>
naprawy powinny być przeprowadzane przez personel serwisowy.
Kiedy wyłączyć odbiornik
W następujących przypadkach prosimy odłączyć urządzenie od zasilania i wezwać pomoc
techniczną z serwisem:
wtyczka lub kabel zasilania są uszkodzone>
ciecz dostała się do środka odbiornika>
gdy urządzenie nie działa prawidłowo>
obudowa odbiornika jest uszkodzona>
Przerwa w zasilaniu
Podczas burzy lub dłuższej nieobecności użytkownika (np. urlop) należy odłączyć kabel>
urządzenia od zasilania.