TechniSat DIGITRADIO 1980 User manual

DIGITRADIO 1980
Portable CD/MP3/USB/Cassette Player with DAB+ Radio

2
CONTENTS
ENGLISH ............................................................................................3-16
FRANÇAIS .......................................................................................17-30
ITALIANO........................................................................................31-44
NEDERLANDS.............................................................................. 45-58
NORSK.............................................................................................59-72
DANSK.............................................................................................73-86
POLSKE.........................................................................................87-100
ČEŠTINA.......................................................................................101-114
SLOVENSKÉ............................................................................... 115-128

EN
FR
IT
NL
NW
DK
PL
CZ
SK
Instruction Manual
DIGITRADIO 1980
Portable CD/MP3/USB/Cassette Player with DAB+ Radio

4
Contents
1 IMPORTANT NOTES.....................................................................................................3
2 LOCATION OF CONTROL ........................................................................................... 5
3 POWER SUPPLY ......................................................................................................... 6
3.1 SWITCHING ON THE UNIT .......................................................................................................7
4 BASS BOOST SYSTEM ................................................................................................7
5 DAB RADIO OPERATION............................................................................................7
5.1 Scanning for stations..................................................................................................................7
5.2 Preset stations.............................................................................................................................. 8
5.3 Manual tune................................................................................................................................... 8
5.4 Now playing information......................................................................................................... 8
5.5 Dynamic range compression (DRC) ................................................................................... 8
6 FM RADIO OPERATION ............................................................................................ 8
6.1 TUNING TO A RADIO STATION .............................................................................................. 8
6.2 AUTO PRESET MEMORY/SCAN ............................................................................................. 9
7 CASSETTE OPERATION ............................................................................................. 9
7.1 PLAYBACK OF CASSETTE......................................................................................................... 9
7.2 AUTO STOP..................................................................................................................................... 9
7.3 TYPES OF CASSETTE.................................................................................................................. 9
7.4 PROTECTING RECORDING ...................................................................................................... 9
7.5 CARE OF CASSETTE MECHANISM....................................................................................... 10
8 CD OPERATION ......................................................................................................... 10
8.1 Discs for Playback..................................................................................................................... 10
8.2 LOADING A DISC........................................................................................................................ 10
8.3 REPEAT PLAY................................................................................................................................ 11
8.4 RANDOM PLAY ............................................................................................................................ 11
8.5 INTRO PLAY ................................................................................................................................. 12
8.6 PROGRAM TRACKS................................................................................................................... 12
9 USB OPERATION....................................................................................................... 12
10 AUX-IN OPERATION..................................................................................................13
11 System.........................................................................................................................13
11.1 Language.......................................................................................................................................13
11.2 Factory reset.................................................................................................................................13
11.3 Soware version.........................................................................................................................13
12 SPECIFICATIONS....................................................................................................... 14

EN
FR
IT
NL
NW
DK
PL
CZ
SK
1 IMPORTANT NOTES
IMPORTANT: Please read before using and retain for future reference.
INTRODUCTION
> Thank you for buying our product.
> Please read through these operating instructions, so you will know how to
operate your equipment properly. Aer you finished reading the instructions
manual, put it away in a safe place for future reference.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
To avoid electrical shock, do not open the cabinet; refer servicing to qualified
personnel only.
CAUTION
Use of controls or adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid direct
exposure to beam.
This Compact Disc player is classified as a Class 1 LASER
PRODUCT. THE CLASS 1 LASER PRODUCT label is located
on the rear exterior.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications could void the user’s authority to operate the
equipment.
> Avoid installing the unit in locations described below:
1. Places exposed to direct sunlight or close to heat radiating appliance such
as electric heaters, on top of other stereo equipment that radiate too much
heat.
2. Places locking ventilation or dusty places.
3. Places subject to constant vibration.
4. Humid or moist places.
> Operate turning controls and switches as instructed in manual.
> Before turning on the power for the first time, make sure that the power
cord is properly installed.
> Store your tapes or CD in a cool area to avoid damage from heat.
5

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO DOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: Remove baeries if exhausted or if they will not be used again for a
long period.
> The incorrect use of baeries can cause electrolyte leakage and will corrode
the compartment or cause the baeries to burst, therefore:
> Do not mix baery types, e.g. alkaline with zinc carbonate.
> When inserting new baeries, replace all baeries at the same time.
6

EN
FR
IT
NL
NW
DK
PL
CZ
SK
2 LOCATION OF CONTROL
7

NAMES OF CONTROLS
1. HANDLE
2. AC SOCKET
3. USB PORT
4. VOLUME CONTROL
5. CD FOLD+/+10/INFO/M+ BUTTON
6. MEM./P-MODE BUTTON
7. AUX IN JACK
8. STOP/MENU BUTTON
9. CD PLAY/PAUSE/SELECT/SCAN BUTTON
10. CD SKIP/SEARCH BACKWARD BUTTON
11. DBBS ON/OFF BUTTON
12. CD SKIP/SEARCH FORWARD BUTTON
13. STANDBY/FUNCTION BUTTON
14. STANDBY INDICATOR
15. FM TELESCOPIC ANTENNA
16. TUNING KNOB
17. CD DOOR OPEN/CLOSE
18. BATTERYCOMPARTMENT
19. CD COMPARTMENT
20. SPEAKERS
21. LCD DISPLAY
22. CASSETTE PAUSE KEY
23. CASSETTE STOP/EJECT KEY
24. CASSETTE FAST FORWARD KEY
25. CASSETTE REWIND KEY
26. CASSETTE PLAY KEY
3 POWER SUPPLY
1. BATTERY OPERATION
– REMOVE THE BATTERY COMPARTMENT DOOR.
– INSERT 8 PIECES UM-2 (C SIZE) BATTERIES INTO THE BATTERY
COMPARTMENT WITH BATTERY POLARITY POSITIONED AS INDICATED.
NOTE: WE RECOMMEND THE USE OF ALKALINE BATTERIES.
– CLOSE THE BATTERY COMPARTMENT DOOR.
2. AC OPERATION
- PLUG THE AC LINE CORD INTO ANY NORMAL HOUSEHOLD AS MAINS OUTLET
IN CORRECT VOLTAGE AND THE MAINS SOCKET.
- THE BATTERIES WILL BE AUTOMATICALLY DISCONNECTED.
8

EN
FR
IT
NL
NW
DK
PL
CZ
SK
9
3.1 SWITCHING ON THE UNIT
Press the STANDBY/FUNC. buon on the front cabinet to turn on unit.
Note: If you don’t use the unit for a long time, disconnect the AC power cord from
the household wall outlets.
Note: In CD/MP3/USB/AUX/CASSETTE mode, when the unit is not providing the
main function for around 15 minutes, the unit will automatically switch into
standby mode. Press the STANDBY/FUNC. buon to turn on the unit again.
Please note that low volume seing in the audio source may be recognized as “no
audio signal”, this will aect the capability of signal detection from the device and
can also originate an automatic switch into standby mode. If this happens please
reactivate the audio signal transmission or increase the volume seing on the audio
source player in order to resume playback.
Electrostatic Discharge hints – The unit may reset or may not reset to normal
operation mode due to electrostatic discharge, just switch it o and reconnect
again.
4 BASS BOOST SYSTEM
The DBBS BUTTON controls the bass of the unit. Bass sound is the lower frequency
ranges of sound. The knob can be pushed to OFF or ON position, When the DBBS is
on, the unit boosts (increases) the sound output of the bass frequencies.
5 DAB RADIO OPERATION
DAB radio mode receives DAB/DAB+ digital radio and displays information about
the station and programmed/track as broadcast. Press the FUNCTION buon until
display reads “Welcome to DAB”.
5.1 Scanning for stations
1. To do a full scan, press the STOP/MENU buon to enter menu selection,
rotate the tuning control or press the or buon to select the “Full
scan” option and press the PLAY/PAUSE/SELECT/SCAN buon on the unit.
Once a full scan is complete, the radio returns to play the previously-selected
station or first station on the station list.
2. To choose between the scanned station list, press the or buon
to scroll through the list of stations and press the PLAY/PAUSE/SELECT/
SCAN buon to confirm. The Now playing screen will display the new station
details.
3. To remove stations that are listed but unavailable, press the STOP/MENU
buon to enter menu selection, rotate the tuning control or press the or
buon to select the “Prune” option and press the PLAY/PAUSE/SELECT/
SCAN buon to enter, press the or buon to choose YES or NO
option, then press the PLAY/PAUSE/SELECT/SCAN buon to confirm. This
removes all invalid stations, indicated in the station list with a “?” in front of
the station name.

5.2 Preset stations
> To store a station in a preset memory, tune to the station that you want to
save as a preset, then press and hold the MEM./P-MODE buon on the unit
until the display shows “Preset Store”. Rotate the tuning control or press the
or buon to choose a preset memory position (for example, “Preset
1”), then press the PLAY/PAUSE/SELECT/SCAN buon to confirm. Repeat this
operation to save up to 30 preset stations.
5.3 Manual tune
> To do a manual tune, press the STOP/MENU buon to enter menu selection,
rotate the tuning control or press the or buon to select the “Manual
tune” option and press the PLAY/PAUSE/SELECT/SCAN buon to confirm.
Rotate the tuning control to tune to the desired stations.
5.4 Now playing information
While a station is playing, the screen shows its name and DLS (Dynamic Label
Segment) information broadcast by the station such as program name, track title
and contact details.
> To view further information, press the FOLD+/+10/INFO/M+ buon on the
unit each time to show next set of information, cycling through: DLS text, DL
Plus information (this is only displayed if broadcast by the station), signal
strength, program type, ensemble name, channel number/frequency, signal
error rate and bit rate.
5.5 Dynamic range compression (DRC)
This function helps to reduce the dierence between the loudest and quietest audio
being broadcast. Eectively, this makes quite sounds comparatively louder and
loud sounds comparatively quieter. There are 3 options in this seing, the options
available are: DRC high/low/o.
> To change the DRC seing, press the STOP/MENU buon to enter menu
selection, select the “DRC” option then rotate the tuning control or press the
or buon to choose a desired option and press the PLAY/PAUSE/
SELECT/SCAN buon to confirm.
6 FM RADIO OPERATION
> Listen to FM radio broadcasts. Press the STANDBY/FUNC. buon until the
display reads FM and the radio frequency
6.1 TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
> Tune to a station by rotating the TUNING knob. The station frequency is
shown on the display.
10

EN
FR
IT
NL
NW
DK
PL
CZ
SK
6.2 AUTO PRESET MEMORY/SCAN
> To scan for stations within reception range and save them to preset memory
automatically, press and hold the PLAY/PAUSE/SELECT/SCAN buon. Aer
the unit is finished scanning, the unit will automatically tune to preset
number 1 (P1). Press and hold the FOLD+/+10/INFO/M+ buon to select the
preset stations.
7 CASSETTE OPERATION
7.1 PLAYBACK OF CASSETTE
> Be sure to tighten any slack tape in the cassee before use, using either a
pencil or a ballpoint pen, simply insert the pen or pencil into the center of
spool and rotate to remove slacks. Depress the STOP/EJECT buon to open
the cassee door.
> Insert the cassee into the compartment with the open end facing upwards
and the full reel on the le hand side, push the cassee well down and close
the door, be sure not to touch the tape surface, Set the Function switch to
“TAPE” position and press the cassee play buon. To stop playback, press
the STOP/EJECT buon once. To release the cassee, press the STOP/EJECT
buon again.
7.2 AUTO STOP
When the tape reaches the end during playback or recording, the built-in auto stop
system will release the depressed play, record keys. The auto stop system operates
while recording from the built-in radio or CD player, only the cassee function is
brought automatically to stop mode and the radio or CD player will continue to play.
7.3 TYPES OF CASSETTE
> Use only good quality cassees (IEC TYPE 1) for making recordings. May
be used to replay other types of cassee but is unable to make proper
recording on these more specialized tapes.
> The use of C120 cassees is NOT recommended in this machine.
7. 4 PROTECTING RECORDING
Normally, anything recorded on the tape is automatically erased when new
recording is made. It is possible to protect your recording from accidental erasure
by removing the tabs found on the rear of the cassee.
11

When the cassee is held with the recorded side upper-most and exposed tape
facing the front, the protective tab will be found on the le rear of the cassee.
All pre-recorded cassee are protected in this way to prevent accidental erasure of
the commercial recording.
“Protected” cassee will prevent the record buon from being operated. If at any
time you aempt to record and find that this buon will not depress, never force
the mechanism or it may be damaged. Check that a cassee has been loaded and
that tab has not been removed. Recording on a cassee from which the tabs have
been removed can be done by covering the tab openings with a piece of adhesive
tape.
7.5 CARE OF CASSETTE MECHANISM
> Gently clean the tape head and pinch wheel/capstan assemblies aer every
10 hours of using the unit. A range of cassee care products are available.
> The erase head and record/play head and the surface of the pinch roller are
delicate and must not be touched with metal objects such as screwdrivers.
You may find it easier to clean the assembly by pressing the PLAY buon
to bright head and pinch roller into view. Be sure to press the STOP buon
aer cleaning the mechanism.
> Damage to the pinch wheel can occur if the unit is le in PLAY mode
with the power switch o. Under no circumstances should you aempt to
lubricate any part of the machine.
8 CD OPERATION
8.1 Discs for Playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio
CD-Recordable (CD-R) discs and finalized digital audio CD-Rewritable (CD-RW)
discs.
8.2 LOADING A DISC
1. Select the CD mode with STANDBY/FUNC. Buon. The following will appear
in the display “CD mode”.
2. Open the CD door. “OPEN” will be shown on the display.
3. Place an audio CD/MP3 into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display aer
several seconds and will playback.
5. Press the PLAY/PAUSE/SELECT/SCAN buon to pause, the display flashing.
12

EN
FR
IT
NL
NW
DK
PL
CZ
SK
6. To release the pause, press again the PLAY/PAUSE/SELECT/SCAN buon.
7. Press STOP/MENU buon to stop playback completely.
Note:
> To ensure good system performance; wait until the disc tray completely
reads the disc before proceeding.
> The number of folders and the number of tracks will be shown with CDs in
the MP3 format.
> If no disc is loaded into the compartment, or the disc is placed upside down,
the display will show “NO DISC”.
8.3 REPEAT PLAY
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press the MEM./P-MODE buon once in play, “REP-1” shows on the display.
The current track will be played over and over again till you press the STOP/
MENU buon.
2. To cancel repeat play, press MEM./P-MODE buon until “REP-1“ disappears
from display.
To repeat all the Tracks
1. Press the MEM./P-MODE buon once in play, “REP-ALL” shows on the
display. All songs will be played over and over again till you press the STOP/
MENU buon.
2. To cancel repeat play, press MEM./P-MODE buon until “REP-ALL“ disappears
from display.
To repeat the Folder (only for MP3 disc which contains more than one folder)
1. Press the MEM./P-MODE buon once in play, “REP-ALBUM” shows on the
display. The current folder will be played over and over again till you press
the STOP/MENU buon.
2. To cancel repeat play, press MEM./P-MODE buon until “REP-ALBUM“
disappears from display.
8.4 RANDOM PLAY
1. Press the MEM./P-MODE buon once in play, “RANDOM“ shows on the
display. The unit will stop to search a track (song) randomly and start
playback from this track, then select another in random order until all tracks
are played over and then stop.
2. To cancel repeat play, press MEM./P-MODE buon until “RANDOM“
disappears from display.
13

8.5 INTRO PLAY
1. Press the MEM./P-MODE buon once in play, “INTRO“ shows on the display.
Each track is played for 10seconds respectively.
2. To cancel repeat play, press MEM./P-MODE buon until “INTRO“ disappears
from display.
8.6 PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20
tracks /MP3 99 tracks can be stored in the memory in any order.
1. In stop mode, press the MEM./P-MODE buon, the MEMORY and P01 will
show on the display.
2. Press the CD SKIP/SEARCH FORWARD buon to select the first desired track
to be programmed.
3. Press the MEM./P-MODE buon to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are
programmed.
5. Press the PLAY/PAUSE/SELECT/SCAN buon to start playback from the first
programmed track.
6. Press the STOP/MENU buon to stop program playback.
8.6.1 Erase the Memory (Program)
To clear the program, you have two options:
1. Press STOP/MENU buon in stop mode, or
2. Open the CD compartment lid, program will be erased.
9 USB OPERATION
1. Press STANDBY/FUNC. buon, USB mode shown on the display.
2. Connect the USB to the USB INPUT. The unit will display total number of
tracks stored inside the USB, the playback stars from track 1 automatically
aer reading the USB.
3. Press the PLAY/PAUSE/SELECT/SCAN buon to temporarily stop. The track
number will flash.
4. Press the STOP/MENU buon to stop playing. The display will show total
number of tracks.
5. Proceed repeat play (repeat 1/repeat all/repeat folder)/program play/
random play/skip up and down operation as the same described in above
“CD OPERATION”.
CAUTION:
> Do not use any USB extension cable for connecting the USB stick which may
cause harmful interference
14

EN
FR
IT
NL
NW
DK
PL
CZ
SK
> In case of malfunction due to electrostatic discharge, just reset the product
(reconnect of power source may be required) to resume normal operation.
10 AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can
be connected to this unit and be amplified.
1. Press STANDBY/FUNC. buon, AUX mode shown on the display.
2. Connect the audio cable into the AUX-IN jack and the other end connect
to the AUDIO OUT jack of the external audio source. The unit will change to
AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
11 System
The system seing allows you to select display languages, reset to factory seings
and view the soware version.
11.1 Language
To select language for display messages from: Deutsch, English, Dansk, Français,
Italiano, Norsk, Suomi, Svenska.
> Press the STOP/MENU buon to enter menu selection, rotate the tuning
control or press the or buon to select the “System” option and
press the PLAY/PAUSE/SELECT/SCAN buon to enter, select “Language”
then rotate the tuning control or press the or buon to choose the
desired language to be displayed, then press the PLAY/PAUSE/SELECT/SCAN
buon to confirm.
11.2 Factory reset
Factory reset can help to clear all user defined seings, replacing them with the
original default values, including the DAB station list and preset stations.
> Press the STOP/MENU buon to enter menu selection, rotate the tuning
control or press the or buon to select the “System” option and
press the PLAY/PAUSE/SELECT/SCAN buon to enter, select “Factory reset”
then rotate the tuning control or press the or buon to choose YES
or NO option, then press the PLAY/PAUSE/SELECT/SCAN buon to confirm.
11.3 Soware version
This displays the current soware version.
> Press the STOP/MENU buon to enter menu selection, rotate the tuning
control or press the or buon to select the “System” option and
press the PLAY/PAUSE/SELECT/SCAN buon to enter, select “SW version”
then press the PLAY/PAUSE/SELECT/SCAN buon to view the current
soware version.
15

12 SPECIFICATIONS
GENERAL
Power Requirement AC 230V~50Hz
DC 12V UM-2 x 8 PC
Power consumption 18 Was
Weight Approx. 2.04kg
Dimension 364mm(L)x243mm(W)x141mm(H)
Operation temperature +5° C - + 35 °C
RECEIVER SECTION
FM Frequency Range 87.5 – 108 MHz
DAB+ Frequency Range 174.928MHz–239.200MHz
COMPACT DISC SECTION
Optical Pickup 3-Beam Laser
Frequency Response 100Hz – 16 KHz
AUDIO SECTION
Power output 2 x 1.8 Was (RMS)
AUX IN JACK 3.5MM
PHONE JACK 3.5MM
ACCESSORIES
Instruction Booklet 1
AC Cord 1
NOTE: Specifications are subject to change for continuous improvement without
prior notice.
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from your
household waste. For more information, please contact the local authority or your
retailer where you purchased the product.
16

EN
FR
IT
NL
NW
DK
PL
CZ
SK
Mode d'emploi
DIGITRADIO 1980
Lecteur CD/MP3/USB/Cassette portable avec radio DAB+

1818
Sommaire
1 NOTES IMPORTANTES............................................................................................. 19
2 EMPLACEMENT DES COMMANDES....................................................................... 21
3 ALIMENTATION..........................................................................................................22
3.1 MISE SOUS TENSION DE L'UNITÉ .......................................................................................23
4 SYSTÈME D'AMPLIFICATION DES BASSES (DBBS)...........................................23
5 MODE RADIO DAB....................................................................................................23
5.1 Recherche de stations............................................................................................................23
5.2 Stations prédéfinies ................................................................................................................ 24
5.3 Syntonisation manuelle......................................................................................................... 24
5.4 Informations sur la lecture en cours............................................................................... 24
5.5 Compression de la gamme dynamique (DRC)........................................................... 24
6 MODE RADIO FM .....................................................................................................24
6.1 SYNTONISATION D'UNE STATION DE RADIO ............................................................... 24
6.2 RECHERCHE/MÉMORISATION AUTOMATIQUE .............................................................25
7 MODE CASSETTES....................................................................................................25
7.1 LECTURE DE CASSETTES........................................................................................................25
7.2 ARRÊT AUTOMATIQUE.............................................................................................................25
7.3 TYPES DE CASSETTES..............................................................................................................25
7.4 PROTECTION DE L'ENREGISTREMENT .............................................................................25
7.5 ENTRETIEN DU MÉCANISME DU LECTEUR DE CASSETTES .....................................26
8 MODE CD ....................................................................................................................26
8.1 Lecture de disques...................................................................................................................26
8.2 CHARGEMENT D'UN DISQUE................................................................................................26
8.3 LECTURE EN BOUCLE..............................................................................................................27
8.4 LECTURE ALÉATOIRE................................................................................................................27
8.5 LECTURE DE L'INTRO ...............................................................................................................28
8.6 PROGRAMMATION DE PISTES..............................................................................................28
9 MODE USB..................................................................................................................28
10 MODE ENTRÉE AUX .................................................................................................29
11 Système......................................................................................................................29
11.1 Langue .......................................................................................................................................... 29
11.2 Réinitialisation............................................................................................................................ 29
11.3 Version du logiciel ................................................................................................................... 29
12 SPÉCIFICATIONS.......................................................................................................30

19
EN
FR
IT
NL
NW
DK
PL
CZ
SK
1 NOTES IMPORTANTES
IMPORTANT: à lire avant utilisation et à conserver pour consultation ultérieure.
INTRODUCTION
> Merci d'avoir acheté notre produit.
> Veuillez lire le présent mode d'emploi afin de savoir comment utiliser
correctement votre équipement. Après avoir lu le mode d'emploi, veuillez le
conserver afin de pouvoir le consulter ultérieurement.
AVERTISSEMENT
Afin d'éviter tout risque d'incendie ou de choc électrique, n'exposez pas cet appareil
à la pluie ou à l'humidité. Afin d'éviter tout choc électrique, n'ouvrez pas le boîtier ;
toute réparation doit être exclusivement eectuée par du personnel qualifié.
ATTENTION
L'utilisation de commandes, de réglages ou de procédures non précisés dans le
présent document peut entraîner une exposition dangereuse au rayonnement.
DANGER
Rayonnement laser invisible lorsque le boîtier ouvert et que le verrouillage est
défectueux. Évitez toute exposition directe au faisceau.
Ce lecteur CD est classé comme un PRODUIT LASER de
classe 1. L'étiquee PRODUIT LASER DE CLASSE 1 figure à
l'arrière du boîtier.
REMARQUE : le fabricant n'est pas responsable des interférences radio ou TV
causées par des modifications non autorisées susceptibles d'annuler le droit de
l'utilisateur à faire fonctionner l'équipement.
> Évitez d'installer l'unité dans les emplacements décrits ci-dessous :
1. Les endroits exposés à la lumière directe du soleil ou à proximité
d'un appareil chauant, comme un radiateur électrique ou sur un autre
équipement stéréo dégageant de la chaleur.
2. Les endroits mal ventilés ou poussiéreux.
3. Les endroits soumis à des vibrations constantes.
4. Les endroits humides.
> Tournez les boutons de commande et actionnez les boutons comme indiqué
dans le manuel.
> Avant de mere l'appareil sous tension pour la première fois, vérifiez que le
cordon d'alimentation est correctement installé.
> Conservez vos cassees ou vos CD dans un endroit frais afin d'éviter tout
dommage lié à la chaleur.
19

20
ATTENTION : AFIN DE RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, NE RETIREZ PAS
LE COUVERCLE (NI L'ARRIÈRE DU BOÎTIER). AUCUNE PIÈCE INTERNE NE PEUT ÊTRE
RÉPARÉE PAR L'UTILISATEUR. TOUTE RÉPARATION DOIT ÊTRE EFFECTUÉE PAR DU
PERSONNEL QUALIFIÉ.
AVERTISSEMENT : retirez les piles si elles sont usagées ou si elles ne sont pas
utilisées pendant une longue période.
> L'utilisation incorrecte des piles peut entraîner une fuite d'électrolyte et faire
rouiller le compartiment à piles ou faire exploser les piles. Pour éviter cela :
> Ne mélangez pas les types de piles, par ex. alcalines et carbonate de zinc.
> Lorsque vous insérez des piles neuves, remplacez toutes les piles en même
temps.
20