TECOM Pro-3600 User manual

Page 1
Tecom Pro-3600 Quick Installation Guide
Pro-3600 Quick Installation Guide
TECO Group 「Pro-3600 Portable Vibration Diagnosis Instrument 」can be applied
in analysis/diagnostic of vibration problems for rotary machines. Setup is quick and
easy. Technician go thru simple steps with diagnostic software (APP) running on
mobile phone to understand potential vibration issues.
It is an essential tool for technicians working in technical support, maintenance, repair
and related fields.
Product contents
a. Tool Box : x1
–xDAQ-600 (P) x1
–IEPE Vibration Gauge x1
–Double head screw x1
–Magnet holder x1
–Winding line x1
–Power Bank x1
–Vibration Pole x1
–Power Charger x1
b. Action package
(soft case 1 pieces) x1

Page 2
Tecom Pro-3600 Quick Installation Guide
Quick Settings and Connection
1. Connect the power bank to the power jack (DC) of the Smart IoT Gateway xDAQ-
600(P), and then turn on the power bank.
2. Wait for the WLAN LED (green) to turn on, and now you can start the WiFi
connection.
3. On Smart mobile phone, Please enter【WiFi】mode to find 【TECOM_XXXXXX】
WiFi network name, then confirm "XXXXXX" 6-digits are exactly the same as the
last 6-digits of MAC address, printed on the serial number label of the Smart IoT
Gateway, press the "TECOM_XXXXXX" for network connection, the Smart phone will
show “Connected”to indicate a successful WiFi connection between the Smart
phone and the Gateway. You only need to do this procedure once. Later, your
phone can automatically connect to the Gateway.
4. Install the magnetic vibration gauge (or w/vibration pole) to the correct position of
the device under test.
5. After completion of steps 1 to 4, you can start the diagnostic procedure by using
Pro-3600 APP on mobile phone.
This 6-digit number must be the same as the
TECOM_XXXXXX 6-digit number on the mobile
WiFi network.

Page 3
Tecom Pro-3600 Quick Installation Guide