Tekelec EAGLE 5 User manual

Tekelec EAGLE® 5
Integrated Signaling System
Release 35.1
Commands Error Recovery Manual
910-3638-001 Revision B
October 2006

Copyright 2006 Tekelec
All Rights Reserved
Printed in U.S.A.
Notice
Information in this documentation is subject to change without notice. Unauthorized use or copying of this
documentation can result in civil or criminal penalties.
Any export of Tekelec products is subject to the export controls of the United Statesand the other countries
where Tekelec has operations.
No part of this documentation may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying or recording, for any purpose without the express written
permission of an authorized representative of Tekelec.
Other product names used herein are for identification purposes only, and may be trademarks of their
respective companies.
RoHS 5/6 - As of July 1, 2006, all products that comprise new installations shipped to European Union
member countries will comply with the EU Directive 2002/95/EC "RoHS" (Restriction of Hazardous
Substances). The exemption for lead-based solder described in the Annex will be exercised. RoHS 5/6
compliant components will have unique part numbers as reflected in the associated hardware and
installation manuals.
WEEE - All products shipped to European Union member countries comply with the EU Directive
2002/96/EC, Waste Electronic and Electrical Equipment. All components that are WEEE compliant will be
appropriately marked. For more information regarding Tekelec's WEEE program, contact your sales
representative.
Trademarks
The Tekelec logo, EAGLE, G-Flex, G-Port, IP7, IP7Edge, IP7Secure Gateway, and TALI are registered
trademarks of Tekelec, Inc. TekServer is a trademark of Tekelec, Inc. All other trademarks are the property
of their respective owners.
Patents
This product is covered by one or more of the following U.S. and foreign patents:
U.S. Patent Numbers:
5,008,929, 5,953,404, 6,167,129, 6,324,183, 6,327,350, 6,456,845, 6,606,379, 6,639,981, 6,647,113, 6,662,017,
6,735,441, 6,745,041, 6,765,990, 6,795,546, 6,819,932, 6,836,477, 6,839,423, 6,885,872, 6,901,262, 6,914,973,
6,940,866, 6,944,184, 6,954,526, 6,954,794, 6,959,076, 6,965,592, 6,967,956, 6,968,048, 6,970,542
Ordering Information
To order additional copies of this document, contact your Tekelec Sales Representative.

910-3638-001 Rev B, October 2006 i
Table of Contents
Chapter 1. Introduction
Overview.................................................................................................... 1-2
Scope and Audience ................................................................................. 1-2
Related Documentation............................................................................ 1-3
Customer Care Center.............................................................................. 1-8
Documentation Packaging, Delivery, and Updates............................. 1-8
Chapter 2. Command Rejected Messages
Introduction............................................................................................... 2-2
Message Listing and Description 2
Chapter 3. SEAS Error Messages
Introduction............................................................................................... 3-2
Message Listing and Description............................................................ 3-2
Appendix A. Acronyms and Abbreviations
Index

ii 910-3638-001 Rev B, October 2006
Table of Contents

910-3638-001 Rev B, October 2006 iii
List of Tables
Table 2-1. Valid Frame ID Parameter Values ...........................................2-18
Table 2-2. Valid Values for the bps Parameter .........................................2-51
Table 2-3. Invalid Parameter Combinations that Generate
an E2155 Error Message. ........................................................................2-56
Table 2-4. Conditions that Generate an E2165 Error Message ...............2-61
Table 2-5. Conditions that Generate an E2257 Error Message .............2-101
Table 2-6. Valid type/period Parameters for
the rept-meas Command ...................................................................2-110
Table 2-7. Valid type/period Parameters for
the rept-ftp-meas Command ...........................................................2-110
Table 2-8. Valid type/entype Parameters for
the rept-meas Command ...................................................................2-111
Table 2-9. Valid type/enttype Parameters for
the rept-ftp-meas Command ...........................................................2-112
Table 2-10. Operations Requiring force=yes Parameter .......................2-147
Table 2-11. Conditions the Generate an E2581 Error Message ............2-234
Table 2-12. Valid Port and Application Type Combinations ...............2-239
Table 2-13. Action if X.25 Route Table is Full .........................................2-272
Table 2-14. Action if X.25 Route Table is Full .........................................2-280
Table 2-15. Routesets Feature with Maximum Values
for mtpdpcq and mtpxlq Parameters .................................................2-347
Table 2-16. Routesets Feature with Maximum Values
for mtpdpcq and mtpxlq Parameters .................................................2-360
Table 2-17. Conditions that Generate an E2903 Error Message ..........2-372
Table 2-18. Valid dev/port Parameter Combinations ..........................2-389
Table 2-19. Valid Parameter Combinations for
an E3269 Error Message .......................................................................2-467
Table 2-20. Valid Values for the nsfi Parameter ....................................2-468
Table 2-21. Possible Low-speed and High-speed Link
Combinations for 1500 Links ...............................................................2-493
Table 2-22. Valid Transmission Rates for the bps Parameter ..............2-497
Table 2-23. Routesets Feature with Maximum Values for
the mtpdpcq and mtpxlq Parameters. ...............................................2-498

iv 910-3638-001 Rev B, October 2006
List of Tables
Table 2-24. Routesets Feature with Maximum Values
for the mtpdpcq and mtpxlq Parameters. ........................................2-513
Table 2-25. Conditions that Generate an E3500 Error Message ...........2-533
Table 2-26. Conditions that Generate an E3524 Error Message ...........2-540
Table 2-27. On/OFF Features and Part Numbers .................................2-564
Table 2-28. TSM and TDM Memory Requirements ..............................2-578
Table 2-29. Valid Subnet Mask Values ....................................................2-602
Table 2-30. Conditions that Generate an E3779 Error Message ...........2-619
Table 2-31. Valid Parameter Combinations for Routing Key Types
using the chg-appl-rtkey Command .............................................2-638
Table 2-32. Reason that Card Requires a Full Data Download ...........2-646
Table 2-33. Valid CIC Ranges for SI and MSU Types ...........................2-660
Table 2-34. Conditions that Generate an E3883 Error Message ...........2-663
Table 2-35. Conditions that Generate an E3932 Error Message ...........2-682
Table 2-36. Conditions that Generate an E4005 Error Message ...........2-704
Table 2-37. Valid PVN Subnet Mask Values ..........................................2-708
Table 2-38. Routing Keys and Supported PSTN Categories
and PSTN IDs for PSTN Category 1 ..................................................2-714
Table 2-39. Number of Allowed Prefixes ................................................2-818
Table 2-40. Parameter Combinations for the inh-alm Command ......2-828
Table 2-41. Valid Frame ID Parameter Values .......................................2-879
Table 2-42. EAGLE 5 ISS Link Cards Not Supported ...........................2-889
Table 2-43. Default Buffer Configuration Sizes .....................................2-896
Table 3-1. SEAS Cross Reference Table .......................................................3-3

910-3638-001 Revision B, October 2006 1-1
1
Introduction
Overview........................................................................................................... 1-2
Scope and Audience ........................................................................................1–2
Related Documentation...................................................................................1–3
Customer Care Center.....................................................................................1–8
Documentation Packaging, Delivery, and Updates....................................1–8

1-2 910-3638-001 Revision B, October 2006
Introduction
Overview
The Commands Error Recovery Manual provides a description of the error messages
used in the EAGLE 5 ISS.
Commands are entered at a terminal to perform system operations such as
displaying the system status, administering system security, and maintaining the
database. The error messages documented in this book are displayed to provide
information about problems encountered when you enter commands.
This document is organized into the following chapters.
Chapter 1, Introduction contains general information about the organization of this
manual, the audience, references to other Tekelec documentation you might need,
information on customer assistance, documentation packaging, delivery, and
updates, and a list of acronyms and abbreviations used in the document.
Chapter 2, Command Rejected Messages contains the error messages generated by
the commands used on the system. These error messages are presented in
alphabetical order. The following items are included in the description of each
message:
• The error message generated by the system.
• A list of the commands that can generate the error message. Note that where
such a list would be extensive, only a representative sample of commands is
provided.
• A brief definition of the error message.
• The actions needed to resolve the error condition or to make sure that the
error message does not appear when the command is executed again.
Chapter 3, SEAS Error Messages contains an index of all of the Signaling
Engineering and Administration System (SEAS) error messages generated by the
EAGLE 5 ISS.
In addition, an index provides an alphabetical listing of error message text and
other entries to assist in finding information.
Scope and Audience
This manual is intended for those who perform maintenance and database
administration of the system. It is assumed that the user is familiar with the SS7
network and its associated protocols. The manual provides command rejected
messages for the system.

Introduction
910-3638-001 Revision B, October 2006 1-3
Related Documentation
The Commands Error Recovery Manual is part of the EAGLE 5 ISS
documentation set and may refer to one or more of the following manuals:
•TheCommands Manual contains procedures for logging into or out of the
EAGLE 5 ISS, a general description of the terminals, printers, the disk drive
used on the system, and a description of all the commands used in the system.
•TheCommands Pocket Guide is an abridged version of the Commands Manual. It
contains all commands and parameters, and shows the command-parameter
syntax.
•TheCommands Quick Reference Guide contains an alphabetical listing of the
commands and parameters. The guide is sized to fit a shirt-pocket.
•TheDatabase Administration Manual – Features contains procedural information
required to configure the EAGLE 5 ISS to implement these features:
—X.25Gateway
—STPLAN
— Database Transport Access
— GSM MAP Screening
— EAGLE 5 Integrated Monitoring Support
•TheDatabase Administration Manual - Gateway Screening contains a description
of the Gateway Screening (GWS) feature and the procedures necessary to
configure the EAGLE 5 ISS to implement this feature.
•TheDatabase Administration Manual – Global Title Translation contains
procedural information required to configure an EAGLE 5 ISS to implement
these features:
— Global Title Translation
— Enhanced Global Title Translation
— Variable Length Global Title Translation
— Interim Global Title Modification
— Intermediate GTT Load Sharing
— ANSI-ITU-China SCCP Conversion
— Flexible GTT Load Sharing
— Origin-based SCCP Routing
•TheDatabase Administration Manual - IP7 Secure Gateway contains procedural
information required to configure the EAGLE 5 ISS to implement the SS7-IP
Gateway.

1-4 910-3638-001 Revision B, October 2006
Introduction
•TheDatabase Administration Manual – SEAS contains the EAGLE 5 ISS
configuration procedures that can be performed from the Signaling
Engineering and Administration Center (SEAC) or a Signaling Network
Control Center (SNCC). Each procedure includes a brief description of the
procedure, a flowchart showing the steps required, a list of any EAGLE 5 ISS
commands that may be required for the procedure but that are not supported
by SEAS, and a reference to optional procedure-related information, which
can be found in one of these manuals:
—Database Administration Manual – Gateway Screening
—Database Administration Manual – Global Title Translation
—Database Administration Manual – SS7
•TheDatabase Administration Manual – SS7 contains procedural information
required to configure an EAGLE 5 ISS to implement the SS7 protocol.
•TheDatabase Administration Manual – System Management contains procedural
information required to manage the EAGLE 5 ISS database and GPLs, and to
configure basic system requirements such as user names and passwords,
system-wide security requirements, and terminal configurations.
•TheDimensioning Guide for EPAP Advanced DB Features is used to provide
EPAP planning and dimensioning information. This manual is used by
Tekelec personnel and EAGLE 5 ISS customers to aid in the sale, planning,
implementation, deployment, and upgrade of EAGLE 5 ISS systems equipped
with one of the EPAP Advanced Database (EADB) Features.
•TheELAP Administration Manual defines the user interface to the EAGLE LNP
Application Processor on the MPS/ELAP platform. The manual defines the
methods for accessing the user interface, menus, screens available to the user
and describes their impact. It provides the syntax and semantics of user input
and defines the output the user receives, including information and error
messages, alarms, and status.
•TheEPAP Administration Manual describes how to administer the EAGLE
Provisioning Application Processor on the MPS/EPAP platform. The manual
defines the methods for accessing the user interface, menus, and screens
available to the user and describes their impact. It provides the syntax and
semantics of user input and defines the output the user receives, including
messages, alarms, and status.
•TheFeature Manual - EIR provides instructions and information on how to
install, use, and maintain the EIR feature on the Multi-Purpose Server (MPS)
platform of the EAGLE 5 ISS. The feature provides network operators with the
capability to prevent stolen or disallowed GSM mobile handsets from
accessing the network.
•TheFeature Manual - G-Flex C7 Relay provides an overview of a feature
supporting the efficient management of Home Location Registers in various
networks. This manual gives the instructions and information on how to

Introduction
910-3638-001 Revision B, October 2006 1-5
install, use, and maintain the G-Flex feature on the Multi-Purpose Server
(MPS) platform of the EAGLE 5 ISS.
•TheFeature Manual - G-Port provides an overview of a feature providing the
capability for mobile subscribers to change the GSM subscription network
within a portability cluster while retaining their original MSISDNs. This
manual gives the instructions and information on how to install, use, and
maintain the G-Port feature on the Multi-Purpose Server (MPS) platform of
the EAGLE 5 ISS.
•TheFeature Manual - INP provides the user with information and instructions
on how to implement, utilize, and maintain the INAP-based Number
Portability (INP) feature on the Multi-Purpose Server (MPS) platform of the
EAGLE 5 ISS.
•TheFTP-Based Table Retrieve Application (FTRA) User Guide describes how to set
up and use a PC to serve as the offline application for the EAGLE 5 ISS FTP
Retrieve and Replace feature.
•TheHardware Manual - EAGLE 5 ISS contains hardware descriptions and
specifications of Tekelec’s signaling products. These include the EAGLE 5 ISS,
OEM-based products such as the ASi 4000 Service Control Point (SCP), the
Netra-based Multi-Purpose Server (MPS), and the Integrated Sentinel with
Extended Services Platform (ESP) subassembly.
• The Hardware Manual provides an overview of each system and its
subsystems, details of standard and optional hardware components in each
system, and basic site engineering. Refer to this manual to obtain a basic
understanding of each type of system and its related hardware, to locate
detailed information about hardware components used in a particular release,
and to help configure a site for use with the system hardware.
•TheHardware Manual - Tekelec 1000 Application Server provides general
specifications and a description of the Tekelec 1000 Applications Server (T1000
AS). This manual also includes site preparation, environmental and other
requirements, procedures to physically install the T1000 AS, and
troubleshooting and repair of Field Replaceable Units (FRUs).
•TheHardware Manual - Tekelec 1100 Application Server provides general
specifications and a description of the Tekelec 1100 Applications Server (T1100
AS). This manual also includes site preparation, environmental and other
requirements, procedures to physically install the T1100 AS, and
troubleshooting and repair of Field Replaceable Units (FRUs).
•TheInstallation Manual - EAGLE 5 ISS contains cabling requirements,
schematics, and procedures for installing the EAGLE 5 ISS along with LEDs,
connectors, cables, and power cords to peripherals. Refer to this manual to
install components or the complete systems.
•TheInstallation Manual - Integrated Applications provides the installation
information for integrated applications such as EPAP 4.0 or earlier

1-6 910-3638-001 Revision B, October 2006
Introduction
(Netra-based Multi-Purpose Server (MPS) platform) and Sentinel. The manual
includes information about frame floors and shelves, LEDs, connectors,
cables, and power cords to peripherals. Refer to this manual to install
components or the complete systems.
•TheLNP Database Synchronization Manual - LSMS with EAGLE 5 ISS describes
how to keep the LNP databases at the LSMS and at the network element (the
EAGLE 5 ISS is a network element) synchronized through the use of
resynchronization, audits and reconciles, and bulk loads. This manual is
contained in both the LSMS documentation set and in the EAGLE 5 ISS
documentation set.
•TheLNP Feature Activation Guide contains procedural information required to
configure the EAGLE 5 ISS for the LNP feature and to implement these parts
of the LNP feature on the EAGLE 5 ISS:
—LNPservices
— LNP options
— LNP subsystem application
— Automatic call gapping
— Triggerless LNP feature
— Increasing the LRN and NPANXX Quantities on the EAGLE 5 ISS
— Activating and Deactivating the LNP Short Message Service (SMS) feature
•TheMaintenance Manual contains procedural information required for
maintaining the EAGLE 5 ISS and the card removal and replacement
procedures. The Maintenance Manual provides preventive and corrective
maintenance procedures used in maintaining the different systems.
•TheMaintenance Pocket Guide is an abridged version of the Maintenance
Manual and contains all the corrective maintenance procedures used in
maintaining the EAGLE 5 ISS.
•TheMaintenance Emergency Recovery Pocket Guide is an abridged version of the
Maintenance Manual and contains the corrective maintenance procedures for
critical and major alarms generated on the EAGLE 5 ISS.
•TheMPS Platform Software and Maintenance Manual - EAGLE 5 ISS with Tekelec
1000 Application Server describes the platform software for the Multi-Purpose
Server (MPS) based on the Tekelec 1000 Application Server (T1000 AS) and
describes how to perform preventive and corrective maintenance for the
T1000 AS-based MPS. This manual should be used with the EPAP-based
applications (EIR, G-Port, G-Flex, and INP).
•TheMPS Platform Software and Maintenance Manual - EAGLE 5 ISS with Tekelec
1100 Application Server describes the platform software for the Multi-Purpose
Server (MPS) based on the Tekelec 1100 Application Server (T1100 AS) and

Introduction
910-3638-001 Revision B, October 2006 1-7
describes how to perform preventive and corrective maintenance for the
T1100 AS-based MPS. This manual should be used with the ELAP-based
application (LNP).
•TheProvisioning Database Interface Manual defines the programming interface
that populates the Provisioning Database (PDB) for the EAGLE 5 ISS features
supported on the MPS/EPAP platform. The manual defines the provisioning
messages, usage rules, and informational and error messages of the interface.
The customer uses the PDBI interface information to write his own client
application to communicate with the MPS/EPAP platform.
•ThePreviously Released Features Manual summarizes the features of previous
EAGLE, EAGLE 5 ISS, and IP7Secure Gateway releases, and it identifies the
release number of their introduction.
•TheRelease Documentation contains the following documents for a specific
release of the system:
—Feature Notice - Describes the features contained in the specified release.
The Feature Notice also provides the hardware baseline for the specified
release, describes the customer documentation set, provides information
about customer training, and explains how to access the Customer
Support website.
—Release Notice - Describes the changes made to the system during the
lifecycle of a release. The Release Notice includes Generic Program Loads
(GPLs), a list of PRs resolved in a build, and all known PRs.
NOTE: The Release Notice is maintained solely on Tekelec’s Customer
Support site to provide you with instant access to the most up-to-date
release information.
—System Overview - Provides high-level information on SS7, the IP7 Secure
Gateway, system architecture, LNP, and EOAP.
—Master Glossary - Contains an alphabetical listing of terms, acronyms, and
abbreviations relevant to the system.
—Master Index - Lists all index entries used throughout the documentation
set.
•TheSystem Manual – EOAP describes the Embedded Operations Support
System Application Processor (EOAP) and provides the user with procedures
on how to implement the EOAP, replace EOAP-related hardware, device
testing, and basic troubleshooting information.

1-8 910-3638-001 Revision B, October 2006
Introduction
Customer Care Center
The Customer Care Center offers a point of contact through which customers can
receive support for problems that may be encountered during the use of Tekelec’s
products. The Customer Care Center is staffed with highly trained engineers to
provide solutions to your technical questions and issues seven days a week,
twenty-four hours a day. A variety of service programs are available through the
Customer Care Center to maximize the performance of Tekelec products that meet
and exceed customer’s needs.
To receive technical assistance, call the Customer Care Center at one of the
following locations:
• Tekelec, UK
Phone [phone]
Fax [phone]
E-mail ec[email protected]
• Tekelec, USA
Phone (within the continental US) 888-367-8552 (888-FOR-TKLC)
(outside the continental US) [phone]
Fax [phone]
E-mail [e-mail]
Documentation Packaging, Delivery, and Updates
Customer documentation is provided with each system in accordance with the
contract agreements. It is updated whenever significant changes that affect
system operation or configuration are made. Updates may be issued as an
addendum, or a reissue of the affected documentation.
The document part number appears on the title page along with the current
revision of the document, the date of publication, and the software release that the
document covers. The bottom of each page contains the document part number
and date of publication.
Two types of releases are major software releases and maintenance releases.
Maintenance releases are issued as addenda with a title page and change bars. On
the changed pages, the date and document part number are changed. On any
unchanged pages that accompany the changed pages, the date and document part
number is unchanged.
When the software release has a minimum effect on documentation, we provide
an addendum. The addendum provides an instruction page, a new title page, a
change history page, and replacement chapters with the date of publication, the
document part number, and change bars.
If a new release has a major impact on documentation, such as a new feature, the
entire documentation set is reissued with a new part number and a new release
number.

910-3638-001 Revision B, October 2006 2-1
2
Command Rejected Messages
Introduction ......................................................................................................2–2
Message Listing and Description...................................................................2–2

2-2 910-3638-001 Revision B, October 2006
E2000 Messages Command Rejected Messages
Introduction
This chapter contains the command rejected error messages generated by the
commands used on the EAGLE 5 ISS. The following items make up each
description of the error message:
• The error message generated by the EAGLE 5 ISS.
• A list of the commands that can generate the error message. Note that
where such a list would be extensive, only a representative sample of
commands is provided.
• A brief definition of the error message.
• The actions needed to resolve the error condition or to make sure that the
error message does not appear when the command is executed again.
To find error messages listed alphabetically by their text, see the index.
The commands that generate the error messages in this document are described in
the Commands Manual.
Message Listing and Description
Command rejected messages are listed below in numerical order.
E2001 Cmd Rej: Undefined msg#
Commands Used: chg-cmd, rtrv-cmd
The cmd parameter value must be a valid system command.
Recovery
Re-enter the command specifying a valid system command.
Refer to the Commands Manual for additional information regarding valid
format, parameters, and syntax for these commands.
E2002 Cmd Rej: Authority Violation
Commands Used: all commands
You cannot enter a command at a system terminal if you have not logged on to the
EAGLE 5 ISS, or if your user ID does not have the authorization to access the
command class for the command you tried to enter.

Command Rejected Messages E2000 Messages
910-3638-001 Revision B, October 2006 2-3
Recovery
1. Log on to the EAGLE 5 ISS. Enter the logon:uid=<user id> command and
then enter your password.
2. If after logging on, you are still unable to enter the command, contact your site
system administrator to obtain user command access privileges to the EAGLE
5 ISS.
E2003 Cmd Rej: Terminal Authority Violation
Commands Used: all commands
You cannot enter a command at a terminal that is not authorized for that EAGLE 5
ISS command class.
Recovery
Perform one of the following:
• Re-enter the command at another terminal that is authorized for that
EAGLE 5 ISS command class.
OR
• Contact the system administrator to discuss EAGLE 5 ISS terminal
command access privileges for the terminal you used to enter the
command originally.
OR
• If you have system administration authority, change the privileges for the
terminal. Enter the chg-secu-trm command.
NOTE: You cannot issue this command on the target terminal.
E2004 Cmd Rej: Keyboard is locked. Enter UNLOCK command
Commands Used: all commands
The keyboard for the terminal was locked using the lock command.
Recovery
Unlock the keyboard. Enter the unlock command. Anyone attempting to use the
keyboard will be prompted to enter the password of the currently logged-on user.

2-4 910-3638-001 Revision B, October 2006
E2000 Messages Command Rejected Messages
E2005 Cmd Rej: Argument frame overflow
Commands Used: all commands
You entered a command in which the frame for the argument detected an
overflow condition. Re-enter the command specifying the correct format for the
command.
Recovery
Re-enter the command specifying the correct format and parameters.
Refer to the Commands Manual for additional information regarding the
command format, parameters, and syntax.
Call your Customer Care Center if this error message appears again.
E2006 Cmd Rej: Missing parameter block separator
Commands Used: All commands that have parameters
You specified an incorrect block separator. To separate multiple parameter blocks
use a colon (:).
Recovery
Re-enter the command specifying a colon (:) between the input values.
Refer to the Commands Manual for additional information regarding the
command syntax.
E2007 Cmd Rej: Too many errors in this command
Commands Used: All commands
You entered a command, in which too many errors have been detected to allow
continued processing. Re-enter the command specifying the correct format for the
command.
Recovery
Re-enter the command specifying the correct format and parameters.
Refer to the Commands Manual for additional information regarding the
command format, parameters, and syntax.

Command Rejected Messages E2000 Messages
910-3638-001 Revision B, October 2006 2-5
Call your Customer Care Center if this error message appears again.
E2008 Cmd Rej: Missing command identifier
Commands Used: All commands
You entered a command without specifying a keyword. Keywords identify the
principal action to be performed by the system and consist of one to three words.
In the following example, dact-slk is the keyword:
dact-slk:loc=1101:port=a
Recovery
Re-enter the command specifying a keyword.
Refer to the Commands Manual for information regarding the correct keyword.
E2009 Cmd Rej: Missing modifier separator
Commands Used: All commands that have parameters
You specified an incorrect modifier separator. Use a hyphen (-) to separate
multiple values within a parameter block.
Recovery
Re-enter the command specifying a hyphen (-) between the input values.
Refer to the Commands Manual for additional information regarding command
syntax.
E2010 Cmd Rej: Unrecognized command
Commands Used: All commands
You entered a command that the EAGLE 5 ISS does not recognize.
Recovery
1. Verify that you have typed the command correctly.

2-6 910-3638-001 Revision B, October 2006
E2000 Messages Command Rejected Messages
Refer to the Commands Manual for additional information regarding the
correct keyword.
2. Make any necessary corrections, and then re-enter the command.
E2011 Cmd Rej: Missing mandatory parameter - <parm>
Commands Used: all commands
You failed to specify a required parameter value for the entered command.
Recovery
Re-enter the command specifying a valid mandatory command parameter.
Refer to the Commands Manual for valid parameter values for this command.
Call your Customer Care Center if this error message appears again.
E2012 Cmd Rej: Cannot specify ALL=YES when command given
Commands Used: all commands
You attempted to run the command specifying the all=yes parameter, which is
invalid for the command.
Recovery
Re-enter the command that generated this error message specifying and
appropriate value for the all parameter.
Refer to the Commands Manual for detailed information about the use of the
command.
Call your Customer Care Center if this error message appears again.
E2013 Cmd Rej: Missing argument assignment operator
Commands Used: all commands
The command you entered requires an argument assignment operator. Use an
equal sign (=) to assign arguments.