tekkiwear T58 User manual

Operaon manual of Depilator - T58
Thank you for purchasing this product. In order to avoid injury caused by misuse, you should rst use this product
read the operaon manual carefully and use the product in strict accordance with the purpose indicated in the
operaon manual.
Product overview
1. Socket; 2. Switch key; 3. Display; 4. Flash buon; 5. Refrigeraon buon;
6. Skin contact surface; 7. Light outlet; 8. 2cm² light outlet*; 9. 1cm² light outlet*;
10. Disinfecon base
*the 2cm² light outlet it can be used en sensive parts, such an armpit, facial u, bikini line, etc.
*the 1cm² light outlet it can be used en small parts, such lips u , nger/toe u…
Display
1. Flash mes; 2. Cooling icon; 3. Auto ash icon; 4. Gear display icon

Disinfecon base
1. USB charging port; 2. Disinfecon buon; 3. Indicator light; 4. Disinfecon lamp
Principle elaboraon
The instrument adopts internaonal advanced photon cosmec IPL technology and uses strong
pulse light to directly irradiate the skin to produce photobiochemical eect. On the one hand, it
can regenerate and rearrange the collagen bers and elasc bers in the skin, restore skin
elascity, improve facial microcirculaon and eliminate or reduce wrinkles; On the other hand,
the intense pulsed light can penetrate the skin and be preferenally and selecvely absorbed by
the pigment groups and capillaries in the ssue. The heat energy can coagulate the blood and
destroy the pigment groups by thermal decomposion without damaging the normal skin ssue,
so as to treat the telangiectasia, remove the color spots, and remove the excess hair.
Irradiaon intensity seng
This product is specially developed for family hair removal, so its light energy is soer and
provides ve light energy with dierent intensies. You can adjust the gear to make it suit-able
for your skin and body hair color, and make yourself feel comfortable. Please select the
appropriate gear according to the following comparison card.
1. Please refer to the table below to determine which light is suitable for your skin and hair color
2. If you feel any pain or discomfort, lower the gear. People with darker skin are more likely to
develop skin allergies because the skin absorbs more light. Therefore, people with dark
complexion are advised to use lower gears. Light on the skin may feel warm or hot, but it should
not be pain.
Skin Color
1 2 3 4 5 6
1. White, 2. Yellow, 3. Ligth Brown, 4. Medium Brown, 5. Dark Brown, 6. Dark Brown or Darker.

Hair Color
1. White/gray, 2. Gules, 3. Light gold, 4. Dark gold/Light brown, 5. Brown, 6. Dark Brown,
7. Black
For skin colors between tones 1 and 3 (white and light brown) with hair colors between tones 4
and 7 (dark gold and black) we recommend the use of gears between 1 and 5, in the case of skin
color 4 (medium brown) we recommend lower gears only between 1 and 3; we insist on
remembering that as the skin tone is darker it is also much more sensive to light and you should
use soer gear intensies, if your skin tone is very dark we do not recommend the use of this
equipment. Consult a specialist.
Safety precauons
• Special aenon
• Please be sure to decorate and use the product in accordance with the regulaons contained
in the user manual. Please read the operaon manual carefully and keep it for future reference.
• If you have any quesons during use, please contact online customer service
Danger: contents related to personal injury caused by wrong operaon.
Warning: incorrect operaon will lead to dangerous contents.
Note: incorrect operaon may cause personal safety or property damage.
Note: it is forbidden to use it in bath or shower.
• Warning: do not use this product near the bathtub, forest bathtub, washbasin or other water
containers. Please keep this product and power adapter dry;
• If the product is damaged, do not touch any internal parts to avoid electric shock;
• Do not insert any object into the product, and do not place the product at will;
• When you need back hair removal, you may need an assistant or partner, which is our
suggeson, because we are worried that you may have risks if you use it alone; If your hair is
longer than 1 mm, please shave rst. Excessive hair absorbs heat on the skin surface, which will
cause skin redness and swelling, and hair burning will produce peculiar smell, which will aect
your use experience of the product;
• If the skin of the irradiated part is not dry and clean, the use eect will be aected, and the
product may not ash or Flash accidentally;
• We lack the data on the use of the product on children under the age of 15, so we ask you to
pay aenon to prevent children under the age of 15 from contacng the product, and please

stay away from children under the age of 15 when pretending. Please use dierent light intensity
gears for dierent body parts as required, because their skin color is dierent; Expected service
life of depilator: the eecve light output is 990000 mes;
• If the product is suitable for more than one person, wipe the machine with a dry cloth before
each use, and wipe the smooth mouth repeatedly with a few drops of high concentra-on
alcohol (no more than 96%).
• If the power cord is damaged, it must be replaced by professionals from the manufacturer's
maintenance department or similar department in order to avoid danger
Warning
• Do not use anperspirant immediately aer irradiang the armpit; Please regularly conrm
and clean the dirt at the irradiaon port to avoid scalding and failure during use;
• Do not put the irradiaon port close to objects easy to demagneze, so as to avoid hidden and
damage; • Do not use it when the vent is blocked to avoid smoke and re;
• Do not face the irradiaon port towards the black object, so as to avoid the normal opera-on
of the machine;
• Do not irradiate clothes, hair and other arcles to avoid blackening, discoloraon and damage;
Do not use it on pets to avoid injury;
• Do not use this product around the eyes to avoid eye injury;
• Aer use, please wipe the hair and skin care products aached to the depilator to avoid failure
and skin damage;
• Do not use it with children. The hair remover will emit strong light and easily hurt your eyes;
Please set the irradiaon intensity according to your skin condion. Be sure to use it from gear
1 for the rst me; If the skin is slightly hot and red aer use, it is normal; The product cannot
be le unaended aer startup. Please shut down in me aer use;
• Clean the skin to ensure that the skin surface is free of hair residue, completely dry and free of
oily substances and stains;
• If the ambient temperature dierence reaches more than 20 degrees (from low-tempera-ture
environment to high-temperature environment, or viceversa), please shut down the instrument
and let it stand for about 2 hours before use; Do not use near inammable and explosive
materials, including sprayers and gas staon, etc., and are liable to cause re and electric shock
injuries. Any unauthorized modicaon is prohibited, which may lead to unacceptable risks.
• The ambient temperature of this depilator is 5-40 °C, please conrm the room temperature
before using; Within 24 hours aer irradiaon, please avoid direct ultraviolet radiaon on the
irradiated part;
• Do not expose the product to the sun or ultraviolet lamp for a long me, which will seriously
damage the product;
• If the built-in fan does not run aer turning on the power supply (the sound of the fan cannot
be heard), do not use it, so as not to cause smoke, re and other faults.

• Do not carry out maintenance or repair during use. Aer use, shut down the machine, unplug
the power socket and wait for the machine to cool for maintenance or repair. Unsuitable
populaon
• Pregnant women, women breaseeding, menstrual period, skin scars, diabetes, vulnerable
skin and light sensive skin should not be used.
• Severe heart disease, moderate and severe hypertension, malignant tumor, folliculis,
infecous skin disease, burn skin and ancoagulant disorder are prohibited; Do not use if you
have abnormal collagen metabolism, including a history of scar and poor wound healing;
• Do not use if there are varicose veins and vasodilaon at the irradiaon site with cardiac
diseases;
• Do not use if your skin is sensive to light and prone to rash or allergy;
• Do not use if the irradiaon site is infected, herpes simplex, skin lesions and hematoma;
• Do not use for diseases that inhibit immune response (including HIV / AIDS infecon, lupus
erythematosus, porphyria, etc.);
• It is forbidden for any paent with hemorrhagic disease, and it is forbidden for external use of
isotrenoin, fruit acid (AHA), salicylic acid (BHA) or Rhododendron acid; For those who use
chemical depilaon within 30 days, those who have used skin whitening products in a short me
or cosmecs containing vitamin A, please use them with cauon;
• Do not use it at the same me as the essenal oil products. Please make sure that the skin is
clean, dry and free of emulsion, lubricant and other cosmecs.
• If the skin surface is not clean and dry, it may aect the use experience of the product and even
damage the product;
• It is forbidden to take aspirin, immunosuppressant, isotrenoin and other drugs. It is forbidden
to use light sensive drugs recently (such as tetracycline and sulfonamide, etc.)
Do not use for the following body parts or under the following condions
1 / inside the mouth, pudenda, mucosa, etc.
2 / plasc and surgical sites
3 / Adam's apple
4 / eyeball, eyelid and around eyes
5 / head
6 / acne area
7 / spots and moles
8 / eyebrows and hair
9 / ear
10 / nipple, areola
11 / inside navel

12 / great vein
13 / taoo and body painng
(Note: this list is not exhausve. If you are not sure whether you can use this product, you are
recommended to consult a doctor)
Maers needing aenon
1. Do not use this instrument for natural black skin
2. Do not expose to the sun before depilaon
3. Please shave before depilaon (do not use chemical depilaon)
4. Be sure to start from the rst gear when using it for the rst me
5. When depilang, make sure that the depilaon outlet is close to the skin, and then depilate
6. It is forbidden to use in dark environment
7. Do not use in direct sunlight to avoid machine failure
8. Do not hit and shake the product violently
9. Do not unplug the plug directly without turning o the machine, so as to avoid damage to the
machine
Note: when using the depilator to stop halfway, be sure to place the air inlet upward and the
LCD downward, which is conducive to beer heat dissipaon and cooling of the depilator.
Geng started
Preparaon for use
1. Please remove the hair on the surface of the skin rst. Aer weng the hair, use the wet
scraping method to do a good job in the pre-treatment of the skin. This can make the hair under
the skin absorb into the light source and ensure the eect of the treatment. If the hair does not
exceed 2mm, the instrument can be operated directly without shaving.
2. Clean the skin and make sure there is no hair on the surface, completely dry and free of any
oily substances. Before using the photon hair remover, it is strictly prohibited to apply
condensing agent, aloe gel and other products, otherwise it will cause no light (only large
equipment in beauty salons need to be applied, and household ones do not need to be applied)
Key descripon
1: Switch key: long press 1.5s to start / shut down. Aer starng up, the display screen displays
the ash mes icon and le bitmap at standard / low gear, the blower inside the machine starts
to work. Briey press upshi / downshi, 1-5, 5-1, and cycle in turn.
2: Flash buon: the default manual ash mode is startup. Short press once to ash once, and
long press 1.5s to enter / exit the automac mode in the light out mode, the automac ash icon
on the display screen is on / o for a long me. Aer entering the automac ash mode, slide
the ash.

3. Refrigeraon buon: aer power on, there is no refrigeraon output by default (the refriger
aon icon on the nixie tube is not displayed). Short press the refrigeraon buon to turn on turn
on or o the refrigeraon funcon, and the refrigeraon icon on the display will be on or o.
4. Disinfecon base: gently press the host into the base and press the disinfecon buon. Aer
the base indicator light is on for about 10 minutes exnguish aer le and right to com-plete
head disinfecon.
Use steps
1. Before taking out the instrument, please clean the head lter of the machine with a so cloth.
2. Before depilaon with this instrument, please wet the hair rst and then scrape it with a hair
scraper.
3. Aer inserng the adapter, the display ashes for 3 mes and displays o to enter the standby
state.
4. Press and hold the switch key for 1.5s, the display will light up, the blower inside the machine
will start working, and the instrument has been started at this me.
5. If the content of the display changes from "ashing" to "always on", it means that the energy
of the hair removal instrument is ready (the rst ash is bright, and the eyes may not adapt.
Please wear goggles to reduce the discomfort of the ash to the eyes).
6. The content of the display screen is "normally on", and the instrument is in the [ash ready]
state; If there is no change in the content of the display, then try unplugging the power adapter
and restarng the machine.
7. Press the depilator vercally on the skin at an angle of 90 " to ensure that the skin is in full
contact. At this me, the "number" in the display screen will "ash" (when using the depilator
for the rst me, there will be a feeling of "micro current" because the skin is not suitable, which
is the normal reacon of the human body and not caused by machine power leakage).
8. Aer the machine is close to the skin, gently press the "ash buon" of the instrument, and
the instrument will emit a ash accompanied by a crisp "crackle". At this me, you will feel the
warmth generated by the ash synchronously (if the temperature is too high, you can briey
press the refrigeraon buon to start the refrigeraon mode. If the temperature is sll too high,
it means that the gear you selected is too high, and it is recommended to start from the rst
gear).
9. Aer the instrument emits a ash, replace the depilaon part. When the energy is ready, the
"gear indicaon" in the display screen will be "normally on", and then repeat the above "step 7"
10. Use the rst gear to test the skin. If there is no adverse reacon aer 24 hours, briey press
the "switch buon" to adjust the energy gear. The energy gear is divided into 5 gears.
11. Cycle according to the above steps to depilate the part you choose. A depilaon course is
generally polished three mes. Take o the whole body rst, and then do the second and third
mes.
12. Please ash as close as possible to the previous ash part, so as to fully deal with the required
part.

13. The product is equipped with automac shutdown. In case of no ash, it will be auto-
macally shut down for 5 minutes. If it connues to be used, it will be recorded according to the
last ash me, automacally shut down aer 5 hours and cycle in turn. If you are not using the
product, you must unplug the power socket to avoid damaging the machine and causing injury.
14. Aer use, please long press the "switch buon" to shut down (aer shutdown, the product
will enter the shutdown countdown) the screen will enter the word "o', unplug the power
socket, and put the instrument into the disinfecon base for light outlet disinfecon.
Mode introducon Connuous play mode (applicable to large areas such as arms and legs):
• Place the light outlet in the skin holding treatment area and fully t with the skin. At this me,
the touch sensing state of the display screen ashes, indicang that the lamp cap is in full contact
with the skin. Aer long pressing the ash buon for 1.5s, the automac mode icon on the
display screen will be on for a long me, and start moving the instrument slowly and evenly on
the skin to keep t with the skin. The ash will be sent out at a certain inter-val.
Please keep it safe at this me Move with the depilator and slide the clothes back and forth in
the area to be depilated for 2 mes to ensure that the depilated area is evenly covered and avoid
missing polishing.
*Tip: the moving speed of the skin can be adjusted according to the ash speed, so that the
coverage is more uniform. The ash frequency of the rst gear is faster, and the ash frequency
of the second gear is slightly slower. The higher the gear, the slower the light speed.
Singles mode (applicable to small areas such as ngers and lip hair):
Place the light outlet in the skin to be treated area and fully t with the skin. At this me, the
touch sensing state of the display screen ashes, indicang that the lamp cap is in full contact
with the skin. Short press the ash buon to start depilaon. Move the lamp cap to the next
skin, wait for the gear icon on the display screen to be on for a long me, and then press the
ash buon to repeat the above operaons in turn.
*Tip: at any me during the depilaon process, if your skin starts to feel overheated, just pause
for a few seconds to let the smooth mouth cool again, and then depilate.
Ecacy cycle reference table
1-4 weeks
2-3 mes a week More than 75% hair Start to fall o naturally
5-6 weeks Twice a week New hair loss And inhibit growth
7-8 weeks
Once a week Hair becomes thinner and less, No rebound
More than 8 weeks
1-2 mes a week According to the hair growth state, Selecve use (hair growth) You can make it
again at the beginning Use unl no longer long)

Post use cart
Precauons aer depilaon
• It is recommended to avoid touching water within 6 hours aer hair removal, and then use
moisturizing water to moisturize the irradiated parts.
• Aer skin hair removal, do not use perfume, facial mask and cosmecs containing frosted
beads.
• Please avoid UV exposure within 24 hours aer hair removal. If necessary, please apply
sunscreen. - Arcial skin whitening during hair removal is not allowed.
• If you need plasc surgery aer depilaon (refer to depilaon area only), please consult your
doctor.
• If you feel unwell, consult your surgeon.
Cleaning and maintenance
In order to ensure the best eect and longest service life of the product, please clean the product
before and aer each depilaon to avoid long-term accumulaon of hair and dust. If you do not
clean normally, the product will not get its due eect.
• Before starng cleaning, the equipment must be turned o and the power must be unplugged
to allow the machine to cool down.
• Wipe the machine body and disinfecon base with so, clean and dry cloth.
• Aer cleaning, store it in a dry and venlated place and store it in a dust-free environ-ment of
- 20-50 °C.
• Do not wash this product and accessories in the faucet and dishwasher.
• Do not use steel ball, abrasive cleaner (toothpaste, etc.) or corrosive liquid (gasoline, engine
oil, acetone, etc.); To clean the product. Note: if the water cleaning eect is not good, you can
use a few drops of high concentra-on alcohol (no more than 96%) to clean the above parts.
Environment protecon
When disposing of products, please do not throw them together with general domesc waste,
but hand them over to the designated recycling center, which is conducive to environmental
protecon.
Troubleshoong
This chapter outlines the most common problems encountered in using this instru-ment. If you
cannot resolve the problem by using the following informaon, please contact the customer
service center in your country.
* The device/power adapter becomes warm during use
This is a normal phenomenon
There is no need to take any acon.

* I put the depilator on the skin and the number ashed], but the cooling fan started running.
Overheat protecon has been acvated.
When the overheat protecon starts, the fan sll runs connuously. Do not turn o the power
of the device, please wait for it to cool for more than 15 minutes before connuing to use.
*[Flash ready] ashes, but the device does not ash when the ash buon is pressed.
The device needs to be reset. Reset the device, turn the power o and back on. It smells had
when using the device.
You have not completely removed the hair from the treatment site. These hairs may burn and
produce a bad
Please remove the hair on the surface of the skin before using this instrument
*During the course of treatment, the skin feels more sensive than usual / unbearable pain
when using the device.
The light intensity seng you are using is too high
Please check to make sure that the appropriate light intensity seng is selected. Please lower
the seng if necessary.