teko ASTRA-GSM User manual

Rev. GSM-РАС-v1_5_en
Communication module ASTRA-GSM
User Guide
This User Guide is intended to study the principle of operation,
operating conditions and maintenance of the communication
module "Astra-GSM (PAK Astra)" (Pic. 1).The manufacturer re-
serves the right to make changes to the design, firmware, circuit
solutions and product packaging that do not worsen its tech-
nical parameters, do not violate mandatory regulatory require-
ments, without prior notice to the consumer. The technical fea-
tures of the product not listed in the User Guide in terms of design,
firmware and circuit solutions are standard for the product, if they
do not worsen the declared technical characteristics.
Abbreviations:
CrossARM –automated workplace of the centralized security
monitoring software;
BAT –accumulator battery;
Tutorial –PKM Astra Pro software embedded manual, orAstra-
812 Pro setup manual from the keypad;
PAK Astra –TEKO cloud server platform;
PKM Astra Pro –Astra Pro configuring and monitoring software
package (see on the website www.teko.biz);
Control Panel –control panel "Astra-812 Pro" or "Astra-8945
Pro".
1 FUNCTION
1.1 The module is designed for operation as part of the Astra
control panel of the Pro series: Astra-8945 Pro, Astra-812 Pro*
1.2 The module is designed to exchange information via mo-
bile cellular communication channels GSM standard
850/900/1800/1900 MHz (GPRS Class 12) for the purpose:
–transmission of digital messages to the Astra PAK Astra
server (using GPRS technology),
–sending text messages and receiving remote control com-
mands of the Control Panel in SMS format,
–transmission of voice messages to user phones (unavailable
for English and Spanish versions of Control panels),
–remote monitoring and control of the Control Panel via the
Internet by means of client services (mobile and web applica-
tions, CrossARM).
1.3 The module is designed for continuous 24h operation.
2 SPECIFICATION
Number of information recipients...............................................8
Number oаsupported SIM-cards, pcs.......................................2
Average current consumption of 812 Pro, 8945 Pro at voltage
12 V (24 V) with installed module, mA, no more..........120 (80)**
Overall dimensions, mm, not more..............................742818
Weight (without antenna), kg, not more..............................0,015
Operating conditions
Temperature range, оС........................................from -10 to +55
Relative humidity, ..................................... .up to 93 at + 40 C
without moisture condensation
3 DELIVERY SET
Astra-GSM communication module (PAK Astra)..............…1 pc.
Antenna GSM...................................................................... 1 pc.
Sticker ................................................................................. 2 pc.
_____________________________________________________
* starting from firmware version v4_0
** For the Control Panel Pro to operate with any set of modules, the rat-
ed current of the power supply must be at least 0.7 A (recommended 1
A)
4 DESIGN
Structurally, the module is made in the form of a printed circuit
board (PCB) with radio elements.
Picture 1
5 INSTALLATION
5.1 After transportation under conditions different from the op-
erating conditions, keep the module unpacked under operating
conditions for at least 4 hours.
5.2 Only persons who have studied this user guide and are al-
lowed to work with electrical installations up to 1000 V are al-
lowed to work on the installation, maintenance and operation of
the module.
5.3 INSTALLATION ORDER
5.3.1 Installing a Module in the 8945 Pro Control Panel:
1) Turn off the power of the
Control Panel 8945 Pro.
2) Open the cover of the 8945
Pro Control Panel by unscrewing
the two screws at the bottom of
the base.
3) Remove the cap for the GSM
antenna opening at the top of the
case base.
4) Install the module in slot A of the 8945 Pro Control Panel:
5) Connect the GSM antenna from the delivery set to the con-
nector installed on the GSM module PCB.
6) Install the SIM card(s) into the SIM card holder of the mod-
ule. SIM cards must be oriented with contacts to the PCB:

Rev. GSM-РАС-v1_5_en
7) Close the cover of the Control Panel 8945 Pro, tighten the
two screws at the bottom of the base of the Control Panel 8945
Pro.
5.3.2 Installing the module in the Control Panel 812 Pro:
1) Turn off the power of the Control Panel 812 Pro.
2) Open the keypad cover of the Control Panel 812 Pro.
3) Open the cover of the terminal block by unscrewing the 2
screws securing it, remove the cover.
4) Unscrew4 screws from the side of the base, remove the base.
5) Install the module into the slot of the control panel 812 Pro
PCB.
6) Connect the GSM antenna from the delivery set to the con-
nector installed on the GSM module PCB:
7) Insert the SIM card(s) into the module's SIM card holder
(see clause 5.3.1 step 6), SIM cards must be oriented with their
contacts to the PCB.
8) Replace the base, tighten the 4 screws.
9) Close the cover of the Control Panel 812 Pro terminal block,
tighten the two screws securing it. Close the keypad cover if
necessary.
6 SETUP
Module configuration is carried out using a computer and the
PKM program Astra-Pro according to the method described in
the User's Manual of the software.
When using the module as part of the Astra-812 Pro control
panel, it is possible to add and configure it through the built-in
keypad and display of the Astra-812 Pro control panel according
to the instructions for the Astra-812 Pro control panel.
7 WARRANTY
7.1 Warranty period of operation - 2 years from the date of
commissioning, but not more than 2 years 6 months from the
date of manufacture.
7.2 Average module life is 10 years.
7.3 The warranty does not take effect in the following cas-
es:
–non-observance of this user guide;
–mechanical damage to the module;
–module repair by a person other than the manufacturer.
9.4 The warranty only applies to the module. All third party
equipment used with the module is covered by their own war-
ranties.
The manufacturer is not liable for any damage to health,
property, or other incidental or special loss, direct or indi-
rect damages based on the user's claim that the module
did not fulfill its functions, or as a result of misuse, failure
or temporary inoperability of the module.
Manufacturer:
ZAO NTC TEKO
420108, Russia, Kazan,
Gafuri str., 71
Tel.:[phone]
[email protected]
www.teko.biz
Made in Russia