Tektronix WVR720UP User manual

WVR720UP, WVR820UP, and WVR830UP Upgrades
for the WVR7200, WVR8200, and WVR8300
Waveform Rasterizers
ZZZ
Instructions
xx
Warning
The servicing instructions are for use by qualified personnel
only. To avoid personal injury, do not perform any servicing
unless you are qualified to do so. Refer to all safety summaries
prior to performing service.
www.tektronix.com
*P075101603*
075-1016-03

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Table of Contents
Important safety information...................................................................................... 1
General safety summary ...................................................................................... 1
Service safety summary....................................................................................... 3
Terms in this manual .......................................................................................... 4
Symbols and terms on the product........................................................................... 4
Kit description ...................................................................................................... 5
Products......................................................................................................... 7
Required tools.................................................................................................. 7
Kit parts lists ................................................................................................... 8
Upgrade installation............................................................................................... 12
Verify the currently installed options....................................................................... 12
How to prevent electrostatic discharge..................................................................... 13
Install software upgrade...................................................................................... 14
Install the option hardware................................................................................... 18
Install the option software key .............................................................................. 35
Ver i fy the upgrade................................................................................................. 36
Quick verification............................................................................................. 36
Detailed verification.......................................................................................... 36
WVR720UP, WVR820UP, and WVR830UP Upgrades i

Table of Contents
ii WVR720UP, WVR820UP, and WVR830UP Upgrades

Important safety information
This manual contains information and warnings that must be followed by the user
for safe operation and to keep the product in a safe condition.
To safely perform service on this product, additional information is provided at
the end of this section. (See page 3, Service safety summary.)
General safety summary
Use the product only as specified. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow
generally accepted safety procedures in addition to the safety precautions specified
in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
WVR720UP, WVR820UP, and WVR830UP Upgrades 1

Important safety information
To avoid fire or personal
injury
Use proper power cord. Use only the power cord specified for this product and
certified for the country of use.
Do not use the provided power cord for other products.
Ground the product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, make sure that the product is properly grounded.
Power disconnect. The power cord disconnects the product from the power
source. See instructions for the location. Do not position the equipment so that
it is difficult to operate the power cord; it must remain accessible to the user at
all times to allow for quick disconnection if needed.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.
Do not operate without covers. Do not operate this product with covers or panels
removed, or with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry. Do not touch exposed connections and components
when power is present.
Do not operate with suspected failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged
or operates incorrectly. If in doubt about safety of the product, turn it off and
disconnect the power cord. Clearly mark the product to prevent its further
operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical
damage and replace when damaged. Do not use probes or test leads if they are
damaged, if there is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing
pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions. Be aware that condensation may occur if
a unit is moved from a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry. Remove the input signals before you clean
the product.
2 WVR720UP, WVR820UP, and WVR830UP Upgrades

Important safety information
Provide proper ventilation. Refer to the installation instructions in the manual for
details on installing the product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or
otherwise obstructed. Do not push objects into any of the openings.
Provide a safe working environment. Always place the product in a location
convenient for viewing the display and indicators.
Avoid improper or prolonged use of keyboards, pointers, and button pads.
Be sure your work area meets applicable ergonomic standards. Consult with an
ergonomics professional to avoid stress injuries.
Use care when lifting and carrying the product.
Use only the Tektronix rackmount hardware specified for this product.
Servicesafetysummary
The Service safety summary section contains additional information required to
safely perform service on the product. Only qualified personnel should perform
service procedures. Read this Service safety summary and the General safety
summary before performing any service procedures.
To avoid electric shock. Do not touch exposed connections.
Do not service alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect power. To avoid electric shock, switch off the product power and
disconnect the power cord from the mains power before removing any covers or
panels, or opening the case for servicing.
Use care when servicing with power on. Dangerous voltages or currents may exist
in this product. Disconnect power, remove battery (if applicable), and disconnect
test leads before removing protective panels, soldering, or replacing components.
Verify safety after repair. Always recheck ground continuity and mains dielectric
strength after performing a repair.
WVR720UP, WVR820UP, and WVR830UP Upgrades 3

Important safety information
Termsinthismanual
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Symbols and terms on the product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read
the marking.
WARNING indicates an injury hazard not immediately accessible as you
read the marking.
CAUTION indicates a hazard to property including the product.
When this symbol is marked on the product, be sure to consult the manual
to find out the nature of the potential hazards and any actions which have to
betakentoavoidthem. (Thissymbolmayalsobeusedtorefertheuserto
ratings in the manual.)
The following symbol(s) may appear on the product:
4 WVR720UP, WVR820UP, and WVR830UP Upgrades

Kit description
Kit description
This document provides instructions for installing the video, audio, and analysis
upgrades listed in the following tables into an existing Tektronix WVR7200,
WVR8200, or WVR8300 waveform rasterizer.
Table 1: Supported video upgrades
Video
upgrades WVR820UP WVR830UP WVR720UP Description
Option 2SDI Adds a second SDI input module, adding 2 additional SDI
inputs that support 3G-SDI, HD-SDI, and SD-SDI. (Option
3G is required for 3G-SDI support).
Option 3G Adds support for 3G-SDI signal formats.
Option 4K Adds support for UHDTV1/4K signal formats.
(requires Options 3G and 2SDI)
Option CPS Adds support for Composite Analog Video Monitoring;
2 composite Analog inputs; passive loop-through. This
option not compatible with Option 2SDI.
Option 3D Adds Stereoscopic 3-D Video Monitoring Capabilities
(including Simultaneous Input Monitoring (SIM) of dual
SDI inputs and synchronized left eye and right eye signals
monitoring (SyncVu™)).
Option S3D Adds Stereoscopic 3-D Video Monitoring Capabilities
(including Simultaneous Input Monitoring (SIM) of dual
SDI inputs and synchronized left eye and right eye signals
monitoring (SyncVu™)).
Option GEN Adds color bar and pathological signal generator for
SD/HD SDI. Option 3G required for 3G-SDI support.
Option AVD Add support for out-of-service audio/video delay
measurement; requires Option AD or DPE.
Option SIM Adds simultaneous monitoring of 2 HD/SD-SDI inputs
or one HD/SD-SDI input and one CPS input; Option 3G
required for 3G-SDI formats support.
WVR720UP, WVR820UP, and WVR830UP Upgrades 5

Kit description
Table 2: Supported audio upgrades
Audio
upgrades WVR820UP WVR830UP WVR720UP Description
Option AD Adds Analog Audio Monitoring (2 sets of 6 channel Analog
Audio inputs and 8 channels of Analog Audio outputs); 16
channels Embedded and AES/EBU Digital Audio support
(8 channels at a time).
Option DPE Adds Option AD capabilities (Analog and Digital Audio,
Embedded or External AES), plus support for decoding
and monitoring Dolby E, Dolby D, and Dolby Digital Plus
Audio. (Audio cable available separately).
Table 3: Supported analysis upgrades
Analysis
upgrades WVR820UP WVR830UP WVR720UP Description
Option EYE Adds Eye Pattern Display and Jitter Measurement
Package (includes 3G-SDI, HD-SDI, and SD-SDI
Eye pattern and Jitter waveform displays; automated
measurements of Eye pattern paramenters,Jitter, and
cable parameters; color bar and pathological signal
generation); Option 3G required for 3G-SDI support.
Option PHY Adds Physical Layer Measurement Package (includes
3G-SDI, HD-SDI, and SD-SDI Eye pattern and jitter
waveform displays; automated measurements of Eye
pattern parameters, jitter, and cable parameters; color bar
and pathological signal generation); Option 3G required
for 3G-SDI support.
Option PHY3 Adds Physical Layer Measurement Package (includes
3G-SDI, HD-SDI, and SD-SDI Eye pattern and jitter
waveform displays; automated measurements of Eye
pattern parameters, jitter, and cable parameters; Option
3G required for 3G-SDI support.
Option PROD Adds Advanced Gamut Monitoring Package (Spearhead
Display and Luma Qualified Vector Display).
Option DAT Adds data analysis capabilities. Allows for logic-level view
of video and embedded audio data stream and ANC data
extraction.
6 WVR720UP, WVR820UP, and WVR830UP Upgrades