Teledyne Linea HS Series User manual

Linea HS Series
Camera User’s Manual
Monochrome, Color and Multifield TDI Line Scan
sensors | cameras | frame grabbers | processors | software | vision solutions
03-032-20296-00
Revision 00
www.teledynedalsa.com

This document does not contain information whose export/transfer/disclosure
is restricted by the Canadian Export Control regulation.
©2020 Teledyne Digital Imaging, Inc.
All information provided in this manual is believed to be accurate and reliable. No
responsibility is assumed by Teledyne DALSA for its use. Teledyne DALSA reserves the right
to make changes to this information without notice. Reproduction of this manual in whole or
in part, by any means, is prohibited without prior permission having been obtained from
Teledyne DALSA.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
States and other countries. Windows, Windows 7, Windows 8 are trademarks of Microsoft
Corporation.
All other trademarks or intellectual property mentioned herein belong to their respective
owners.
Document Date: December 17, 2020
Document Number: 03-032-20296-00
About Teledyne DALSA
Teledyne DALSA, a business unit of Teledyne Digital Imaging Inc., is an international high-
aperformance semiconductor and Electronics Company that designs, develops,
manufactures, and markets digital imaging products and solutions, in addition to providing
wafer foundry services.
Teledyne DALSA offers the widest range of machine vision components in the world. From
industry-leading image sensors through powerful and sophisticated cameras, frame
grabbers, vision processors and software to easy-to-use vision appliances and custom vision
modules.

Linea HS Series Camera User's Manual Contents •3
Contents
FIGURES 6
LINEA HS SERIES CAMERAS 8
DESCRIPTION 8
Color and Multifield Technology 9
CAMERA HIGHLIGHTS 10
Common Features 10
Resolution 10
Programmability 10
Applications 10
PART NUMBERS AND SOFTWARE REQUIREMENTS 11
SPECIFICATIONS 13
Common Camera Specifications 13
Monochrome 300kHz Models 14
Monochrome 400kHz Models 15
Color and Multifield Models 16
Super Resolution Monochrome Model 17
Performance 1) 17
Environmental Specifications 17
Flash Memory Size 18
Certification & Compliance 18
SPECIFICATIONS:MONOCHROME MODELS 19
Responsivity & QE 19
Camera Input Power 21
SPECIFICATIONS:COLOR MODEL 23
Responsivity & QE 23
Camera Input Power 24
SPECIFICATIONS:MULTIFIELD MODEL 25
Responsivity & QE 25
Camera Input Power 26
SPECIFICATIONS:SUPER RESOLUTION 32K MODEL 27
Responsivity & QE 27
Camera Input Power 28
LINEA HS DARK CURRENT 29
CAMERA PROCESSING CHAIN 31
SUPPORTED INDUSTRY STANDARDS 31
GenICam™ 31
Camera Link HS 32
Data Cables 33
MECHANICAL DRAWINGS 35
PRECAUTIONS 39
Electrostatic Discharge and the CMOS Sensor 39
INSTALL &CONFIGURE FRAME GRABBER &SOFTWARE 40
Using Sapera CamExpert 40
CamExpert Panes 41
SETTING UP FOR IMAGING 43
Camera I / O Connectors 43

4•Contents Linea HS Series Camera User's Manual
Powering the Camera 43
Power and GPIO Connections 44
Establishing Camera Communications 47
Selecting the Data Format 47
Establishing Data Integrity 48
CAMERA PERFORMANCE AND FEATURES 49
SYNCHRONIZING TO OBJECT MOTION 49
Acquiring Images: Triggering the Camera 49
Measuring Line (Trigger) Rate 50
Maximum Line Rate 50
Minimum Line Rate 51
Scan Direction 51
Camera Orientation 53
Spatial Correction 54
Alignment Markers 61
Parallax Correction: Using the Camera at Non-Perpendicular Angles to the
Object 62
Imaging Modes 64
TDI Mode 64
High Dynamic Range (HDR) 65
High Full Well 65
Area Mode 65
Multifield Modes 65
32k Super Resolution Modes 66
Internal Trigger Mode 67
ESTABLISHING THE OPTIMAL RESPONSE 68
Exposure Control by Light Source Strobe 68
Image Response Uniformity & Flat Field Calibration 71
Saving & Loading a PRNU Set Only 72
Setting Custom Flat Field Coefficients 72
Flat Field Calibration Filter 73
Flat Field Calibration Regions of Interest 73
IMAGE FILTERS 74
Kernels 74
Image Filter Contrast Ratio 74
BINNING 75
USING AREA OF INTEREST (AOIS) 76
Steps to Setup Area of Interest 77
Rules for Setting Areas of Interest 77
ENHANCEMENT OF INTEREST (EOIS)REGIONS 78
CUSTOMIZED LINEARITY RESPONSE (LUT) 79
How to Generate LUT with CamExpert 80
ADJUSTING RESPONSIVITY AND CONTRAST ENHANCEMENT 82
Black Level 83
CHANGING OUTPUT CONFIGURATION 83
Pixel Format 83
RED PIXEL ALIGNMENT 84
Red Shift X and Y 85
SAVING &RESTORING CAMERA SETUP CONFIGURATIONS 87
Active Settings for Current Operation 88
User Setting 88
Factory Settings 88

Linea HS Series Camera User's Manual Contents •5
Default Setting 88
APPENDIX A: GENICAM COMMANDS 89
CAMERA INFORMATION CATEGORY 90
Camera Information Feature Descriptions 90
Built-In Self-Test Codes (BIST) 93
Camera Power-Up Configuration Selection Dialog 93
Camera Power-up Configuration 93
User Set Configuration Management 94
CAMERA CONTROL CATEGORY 95
Camera Control Feature Descriptions 95
DIGITAL IO CONTROL CATEGORY 99
Digital IO Control Feature Descriptions 99
FLAT FIELD CATEGORY 102
Flat Field Control Feature Description 102
Image Filter Mode 104
IMAGE FORMAT CONTROL CATEGORY 105
Image Format Control Feature Description 105
FILE ACCESS CONTROL CATEGORY 108
File Access Control Feature Descriptions 108
File Access via the CamExpert Tool 110
CLHS File Transfer Protocol 111
Upload File to Camera 112
Download a List of Camera Parameters 112
TRANSPORT LAYER CONTROL CATEGORY 113
Transport Layer Feature Descriptions 113
ACQUISITION AND TRANSFER CONTROL CATEGORY 115
Acquisition and Transfer Control Feature Descriptions 115
APPENDIX B: TROUBLE SHOOTING GUIDE 116
DIAGNOSTIC TOOLS 116
RESOLVING CAMERA ISSUES 119
Communications 119
Image Quality Issues 120
Power Supply Issues 123
Causes for Overheating & Power Shut Down 124
DECLARATIONS OF CONFORMITY 125
FCC Statement of Conformance 125
CE Declaration of Conformity 125
DOCUMENT REVISION HISTORY 126
CONTACT INFORMATION 127
SALES INFORMATION 127
TECHNICAL SUPPORT 127

6•Contents Linea HS Series Camera User's Manual
Figures
Figure 1: 8K Monochrome Models Spectral Responsivity & QE 19
Figure 2: 16K Monochrome Models Spectral Responsivity & QE 20
Figure 3: Standard 8k Models Power vs. Input Voltage 21
Figure 4: Standard 16k Models Power Vs. Input Voltage 21
Figure 5. HL-HM-16K40H-00-R Power Vs. Input Voltage 22
Figure 6: Color Model Spectral Responsivity 23
Figure 7: Color Model QE 24
Figure 8: Color Model Power Vs. Input Voltage 24
Figure 9: Multifield Model Spectral Responsivity 25
Figure 10: Multifield Model QE 26
Figure 11: Multifield Model Power Vs. Input Voltage 26
Figure 12: Super Resolution Model Spectral Responsivity & QE, 32k SR Mapped, 1x gain 27
Figure 13. Super Resolution Model Power Vs. Input Voltage 28
Figure 14. Typical Dark Signal vs. Line Rate 29
Figure 15. Line Period vs. Dark Signal 30
Figure 16: Digital data processing chain 31
Figure 17: Linea HS Dual LC/SFP+ Connector Configuration 32
Figure 18: Single CLHS Connector Configuration 32
Figure 19: HL-FM-08K30H-00-R Mechanical Drawing 35
Figure 20: HL-HM-08K30H-00-R and HL-HM-08K40H-00-R Mechanical Drawing 36
Figure 21: HL-FM-16K15A-00-R Mechanical Drawing 37
Figure 22: HL-HM-16K30H-00-R, HL-HM-16K40H-00-R and HL-HF-16K10T-00-R Mechanical
Drawing 38
Figure 23: CamExpert Frame Grabber Control Window 41
Figure 24. Camera I / O Connectors: CX4 (left) & LC Fiber Optic (right) 43
Figure 25: 12-pin Hirose Pin Numbering 44
Figure 26: GPIO cable accessory #CR-GENC-IOP00 46
Figure 27. Image with incorrect scan direction 52
Figure 28: Example of Object Movement and Camera Direction 53
Figure 29: Spatial Correction 54
Figure 30. Standard and High-Speed Camera Line Spacing –Forward Scan Direction 55
Figure 31. Standard and High-Speed Camera Line Spacing –Reverse Scan Direction 56
Figure 32. Multifield Camera Line Spacing –Forward Scan Direction 57
Figure 33. Standard and High-Speed Camera Line Spacing –Reverse Scan Direction 58
Figure 34. Super Resolution Camera Line Spacing –Forward Scan Direction 59
Figure 35. Super Resolution Camera Line Spacing –Reverse Scan Direction 60
Figure 36: Alignment Markers 61
Figure 37: Camera Angle Parallax 62
Figure 38: Parallax Effect on Sensor Arrays Output 63
Figure 39: Strobe Timing 68
Figure 40 GPIO functionality block diagram 70
Figure 41: 1 x 3 kernel 74
Figure 42: 1 x 5 kernel 74
Figure 43: 2x2 Binning 75
Figure 44: Enhancement of Interest 78
Figure 45: Black Level, Gain and System Gain Processing Chain 82
Figure 46: Red Pixel Artifacts 84
Figure 47: Align Red X Shift and Align Red Y Shift 85
Figure 48: Effect of Align Red X / Y Shift Settings 86
Figure 49. Relationship Between Camera Settings 87
Figure 50 Example CamExpert Camera Information Panel 90

Linea HS Series Camera User's Manual Contents •7
Figure 51: CamExpert Power-Up Configuration Dialog 93
Figure 52: Camera Control Panel 95
Figure 53 Digital I/O Control Panel 99
Figure 54: Flat Field Panel 102
Figure 55: Image Format Panel 105
Figure 56: File Access Control Panel 108
Figure 57: File Access Control Tool 110
Figure 58: File Upload Completed Message Box 110
Figure 59: Transport Layer Panel 113
Figure 60: Acquisition & Transfer Control Panel 115
Figure 61: CamExpert Voltage & Temperature Features 116
Figure 62: CamExpert Test Pattern Feature 117

8•Linea HS Series Cameras Linea HS Series Camera User's Manual
Linea HS Series Cameras
Description
Teledyne DALSA introduces a breakthrough CMOS TDI line scan camera format with unprecedented
speed, responsivity and exceptionally low noise.
The Linea HS™ TDI cameras have 8k,16k or 32k pixel resolution, a 5 µm x 5 µm pixel size and are
compatible with fast, high magnification lenses.
The Linea HS 32k camera is capable of capturing 32768 pixel wide images with a patent-pending
sensor design that enables users to significantly improve subpixel defect detectability while using
existing optical lenses.
These cameras have a maximum line rate of 400 kHz with up to 32k resolution.
The camera uses the Camera Link HS™ interface—the industry standard for very high-speed
camera interfaces with long transmission distances and cable flexing requirements
(CX4 or LC connector).
Teledyne DALSA’s Linea HS cameras and compatible frame grabbers combine to offer a complete
solution for the next generation of automatic optical inspection systems.
This camera is recommended for detecting small defects at high speeds and over a large field of
view in LCD and OLED flat panel displays, DNA sequencing, printed circuit boards, film and large
format web materials.
Monochrome Models
Part Number
Description
HL-FM-08K30H-00-R
8192 x 192 pixels, maximum line rate of 280 kHz (up to 300 kHz using AOI), 5 µm x 5 µm pixel
size, monochrome / HDR output, Camera Link HS LC fiber optic connector.
HL-FM-16K15A-00-R
16384 x 128 pixels, maximum line rate of 143 kHz (up to 150 kHz using AOI, 5 µm x 5 µm pixel
size, monochrome output, Camera Link HS LC fiber optic connector.
HL-HM-08K30H-00-R
8192 x 192 pixels, maximum line rate of 300 kHz, 5 µm x 5 µm pixel size, monochrome / HDR
output, Camera Link HS CX4 connector.
HL-HM-16K30H-00-R
16384 x 192 pixels, maximum line rate of 300 kHz , 5 µm x 5 µm pixel size, monochrome / HDR
output, Camera Link HS CX4 data connector.
HL-HM-08K40H-00-R
8192 x 192 pixels, maximum line rate of 400 kHz, 5 µm x 5 µm pixel size, monochrome / HDR
output, Camera Link HS CX4 control & data connector.
HL-HM-16K40H-00-R
16384 x 192 pixels, maximum line rate of 400 kHz , 5 µm x 5 µm pixel size, monochrome / HDR
output, Camera Link HS CX4 control & data connector.
HL-HM-32K40S-00-R
32,768 pixels x 64, maximum line rate of 400 kHz, 2.5 µm x 2.5 µm pixel size, monochrome
output, Camera Link HS CX4 control & data connector.

Linea HS Series Camera User's Manual Linea HS Series Cameras •9
Color and Multifield Technology
Multifield is a new imaging technology that enables capturing multiple images using various lighting
conditions (for example, brightfield, darkfield and backlight) in a single scan.
Teledyne DALSA’s Linea HS multifield camera is the first product in the industry capable of
capturing up to three images using light sources at different wavelengths.
The camera uses advanced wafer-level coated dichroic filters with minimum spectral crosstalk to
spectrally isolate three images captured by separate TDI arrays. Depending on the light sources
used, narrowband filters may be needed at the light sources.
This new technology significantly improves the inspection speeds and image quality, as it
eliminates the need for multiple scans in an inspection system.
The difference between traditional color imaging and multifield imaging is in the filter technology.
Conventional color filters have significant spectral crosstalk between RGB channels, while the
multifield filters have minimal spectral crosstalk.
Color and Multifield Models
Part Number
Description
HL-HC-16K10T-00-R
16384 x (64 + 128 +64) pixels, maximum line rate of 300 kHz (100 kHz x 3), 5 µm x 5 µm pixel
size, RGB output, Camera Link HS CX4 control & data connector.
HL-HF-16K40T-00-R
16384 x (64 + 128 +64) pixels, maximum line rate of 400 kHz (130 kHz x 3), 5 µm x 5 µm pixel
size, multifield output, Camera Link HS CX4 control & data connector.

10 •Linea HS Series Cameras Linea HS Series Camera User's Manual
Camera Highlights
Common Features
•Highly sensitive CMOS TDI
•Up to 400 kHz line rates
•Very low noise
•Bidirectionality
•Horizontal and Vertical Binning
•Robust Camera Link HS interface
•CX4 or LC Camera Link HS control & data connector
•Smart lens shading correction
•High dynamic LUT mode
Resolution
•Monochrome Models: 8K, 16K 32k pixel resolution
•Color and Mulitifield Model: 16K pixel resolution
Programmability
•Multiple areas of interest for data reduction
•Region of interest for easy calibration of lens and shading correction
•Smart lens shading correction
•Test patterns & diagnostics
Applications
•Flat panel LCD and OLED display inspection
•Web inspection
•Printed circuit board inspection
•Pathology
•DNA sequencing
•High throughput and high-resolution applications

Linea HS Series Camera User's Manual Linea HS Series Cameras •11
Part Numbers and Software Requirements
The camera is available in the following configurations:
Table 1: Camera Models Comparison
Part Number
Resolution
Max. Line Rates
Pixel Size
Control & Data
Monochrome
HL-FM-08K30H-00-R
8192 x 192 (128 + 64)
pixels
280 kHz mono / 140 kHz x 2 HDR
(300 kHz / 150 kHz x 2 using AOI)
5.0 x 5.0 µm
Camera Link HS
LC fiber optic
HL-FM-16K15A-00-R
16384 x 192 (128 + 64)
pixels
140 kHz mono
(150 kHz using AOI)
5.0 x 5.0 µm
Camera Link HS
LC fiber optic
HL-HM-08K30H-00-R
8192 x 192 (128 + 64)
pixels
300 kHz mono / 150 kHz x 2 HDR
5.0 x 5.0 µm
Camera Link HS
CX4
HL-HM-16K30H-00-R
16384 x 192 (128 + 64)
pixels
300 kHz mono / 150 kHz x 2 HDR
5.0 x 5.0 µm
Camera Link HS
CX4
HL-HM-08K40H-00-R
8192 x 192 (128 + 64)
pixels
400 kHz mono / 200 kHz x 2 HDR
5.0 x 5.0 µm
Camera Link HS
CX4
HL-HM-16K40H-00-R
16,384 x 192 (128 + 64)
pixels
400 kHz mono / 200 kHz x 2 HDR
5.0 x 5.0 µm
Camera Link HS
CX4
HL-HM-32K40S-00-R
32,768 x 64 pixels
400 kHz
2.5 x 2.5 µm
Camera Link HS
CX4
Color
HL-HC-16K10T-00-R
16,384 x (64 + 128 + 64)
pixels
100 kHz x 3
5.0 x 5.0 µm
Camera Link HS
CX4
Multifield
HL-HF-16K13T-00-R
16,384 x (64 + 128 + 64)
pixels
130 kHz x 3
5.0 x 5.0 µm
Camera Link HS
CX4

12 •Linea HS Series Cameras Linea HS Series Camera User's Manual
Table 2: Frame Grabber
Compatible Frame grabber
Linea HS Model
Teledyne DALSA Xtium2-CLHS FX8 (OR-A8S0-FX840)
HL-FM-08K30H
HL-FM-16K15A
Teledyne DALSA Xtium2-CLHS PX8 (OR-A8S0-PX870)
HL-HM-08K30H
HL-HM-16K30H
HL-HF-16K13T
HL-HM-08K40H
HL-HM-16K40H
HL-HC-16K10T
Teledyne DALSA Xtium2-CLHS PX8-HR (OR-A8S0-HX870)*
HL-HM-32K40S
Other compatible frame grabbers may be available from third-party vendors.
*Required for custom patent-pending pixel processing: HL-HM-32K40 S-00-R is currently only compatible with this frame grabber.
Table 3: Software
Software
Product Number / Version Number
Camera firmware
Embedded within camera
GenICam™ support (XML camera description file)
Embedded within camera
Sapera LT, including CamExpert GUI application and GenICam for Camera Link
imaging driver
Latest version on the
Teledyne DALSA Web site

Linea HS Series Camera User's Manual Linea HS Series Cameras •13
Specifications
Test Conditions unless otherwise specified:
•8-bit, 1x gain
•100 kHz line rate
•Light source: White LED if wavelength not specified
•Front plate temperature: +45º C
•DN = digital number
Specifications not guaranteed when operating in area mode
Common Camera Specifications
The following specifications apply to all models.
Table 4: Common Camera Performance Specifications
Specifications
Imager Format
High speed CMOS TDI
Pixel Size
5.0 µm x 5.0 µm
Pixel Fill Factor
100%
Connectors and Mechanicals
Control & Data Interface
Camera Link HS CX4 or LC
Power
+12 V to +24 V DC, Hirose 12-pin circular
Operating Temp
+0 °C to +65°C (front plate temperature)
Optical Interface
Sensor to Camera Front Distance
12 mm
Sensor Alignment (Relative to sides of camera)
Flatness
50 µm
y
100 µm (Parallelism vs. front plate)
x
± 300 µm (Cross-Scan Direction)
y
± 300 µm (In-Scan Direction)
z
± 300 µm (Along optical axis)
z
± 0.4° (Rotation around optical axis)
Performance
Notes
Analog Gain
1x, 2x, 4x or 8x
Digital Gain
1x to 10x
DC Offset
0 DN
Adjustable
PRNU
< ±2%
At 50% saturation (1,2)
DSNU (FPN)
< ±2 DN
Integral non-linearity
< 2%
1) Calibration at 80% saturation, measurements at 50% saturation
2) Light sources vary spectrally and spatially: re-calibrate cameras in actual system

14 •Linea HS Series Cameras Linea HS Series Camera User's Manual
Monochrome 300kHz Models
The following specifications apply to the standard Linea HS models:
•HL-FM-08K30H
•HL-FM-16K15A
•HL-HM-08K30H
•HL-HM-16K30H
Table 5: Standard Camera Models Performance Specifications
Specifications
HL-FM-08K30H
HL-FM-16K15A
HL-HM-08K30H
HL-HM-16K30H
Resolution
8192 x
(128+64)
16384 x 128
8192 x
(128+64)
16384 x
(128+64)
Line Rate, maximum
300 kHz (mono)
150 kHz x 2 (HDR)
150 kHz
300 kHz (mono)
150 kHz x 2 (HDR)
300 kHz (mono)
150 kHz x 2 (HDR)
Line rate, min
10 kHz
Bit Depth
8-bit or 12-bit selectable
Connectors and
Mechanicals
HL-FM-08K30H
HL-FM-16K15A
HL-HM-08K30H
HL-HM-16K30H
Typical Power Dissipation
17 W
22 W
18 W
30 W
Size Width (cross scan)
Height (in scan)
Depth (optical axis)
76 mm
76 mm
85 mm
97 mm
140.5 mm
78.6 mm
76 mm
76 mm
85 mm
97 mm
140.5 mm
78.6 mm
Mass
< 500 g
1.2 kg
< 500 g
1.2 kg
Optical Interface
HL-FM-08K30H
HL-FM-16K15A
HL-HM-08K30H
HL-HM-16K30H
Lens Mount
M58 x 0.75 mm
M90 x 1 mm
M58 x 0.75 mm
M90 x 1 mm
Performance1)
Notes
Random Noise
< 0.2 DN rms (10 e-)
Typical(1)
Peak Responsivity
500 DN/nJ/cm2 (8K models)
600 DN/nJ/cm2 (16K models)
@670 nm
Dynamic Range
70 dB
Typical
Full Well
25,000 e-
Typical
SEE
0.5 nJ/cm2
At 670 nm
NEE
0.4 pJ/cm2
At 670 nm
1) Random Noise below quantization limit cannot be measured accurately; use higher bit depth or higher gain for
comparison purposes

Linea HS Series Camera User's Manual Linea HS Series Cameras •15
Monochrome 400kHz Models
The following specifications apply to the high-speed Linea HS models:
•HL-HM-08K40H
•HL-HM-16K40H
Table 6: High Speed Camera Model Performance Specifications
Specifications
HL-HM-08K40H
HL-HM-16K40H
Notes
Resolution
8192 x 192
16384 x 192
128 + 64 dual array
Line Rate, maximum
400 kHz (monochrome mode)
200 kHz x 2 (HDR mode)
Line rate, min
10 kHz
Bit Depth
8-bit or 12-bit selectable output
Sensor readout is 11-bits only.
Connectors and Mechanicals
HL-HM-08K40H
HL-HM-16K40H
Notes
Control & Data Interface
Camera Link HS CX4
Power
+12 V to +24 V DC, Hirose 12-pin circular
Typical Power Dissipation
18 W
30 W
Size Width
Height
Depth
76 mm
76 mm
85 mm
97 mm
140.5 mm
78.6 mm
Cross-Scan direction
In-Scan direction
Along optical axis
Mass
< 500 g
1.2 kg
Operating Temp
+0 °C to +65°C
front plate temperature
Optical Interface
HL-HM-08K40H
HL-HM-16K40H
Notes
Lens Mount
M58 x 0.75 mm
M90 x 1 mm
Performance1)
HL-HM-08K40H
HL-HM-16K40H
Notes
Random Noise
< 0.2 DN rms
(14 e-)
< 0.2 DN rms
(14 e-)
Typical(1)
Peak Responsivity
500 DN/nJ/cm2
600 DN/nJ/cm2
@670 nm
Dynamic Range
67 dB
67 dB
Typical
Full Well
25,000 e-
Typical
Full Well
SEE
0.5 nJ/cm2
0.5 nJ/cm2
At 670 nm
NEE
< 0.4 pJ/cm2
< 0.4 pJ/cm2
At 670 nm
1) Random Noise below quantization limit cannot be measured accurately; use higher bit depth or higher gain for
comparison purposes

16 •Linea HS Series Cameras Linea HS Series Camera User's Manual
Color and Multifield Models
The following specifications apply to the color and multifield Linea HS models:
•HL-HF-16K13T
•HL-HC-16K10T
Table 7: Color and Multifield Camera Model Performance Specifications
Specifications
HL-HC-16k10T
HL-HF-16K13T
Notes
Resolution
16,84 x (64+128+64)
16,384 x (64+128+64)
3 TDI arrays
64 + 128 + 64
stages
Line Rate, maximum
100kHz x 3
130 kHz x 3
Line rate, min
10 kHz x 3
Limited by dark
current
Bit Depth
8-bit or 12-bit
selectable
Connectors and
Mechanicals
HL-HC-16k10T
HL-HF-16K13T
Notes
Typical Power
Dissipation
30W
30 W
Size Width
Height
Depth
97 mm
140.5 mm
78.6 mm
97 mm
140.5 mm
78.6 mm
Cross-Scan direction
In-Scan direction
Along optical axis
Mass
1.2 kg
1.2 kg
Optical Interface
HL-HC-16k10T
HL-HF-16K13T
Notes
Lens Mount
M90 x 1 mm
M90 x 1 mm
Performance1)
HL-HC-16k10T
HL-HF-16K13T
Notes
Random Noise
< 0.2 DN rms
(10 e-)
< 0.2 DN rms
(10 e-)
Typical2)
Peak Responsivity
Blue 180
Green 230
Red 290
Blue 180
Green 230
Red 290
DN / nJ / cm2 8-bit
Digital Gain
1x to 10x
1x to 10x
Dynamic Range
69 dB
69 dB
Typical
Full Well
25,000 e-
25,000 e-
Typical
SEE
Blue 1.3 nJ/cm2
Green 1 nJ/cm2
Red 0.8 nJ/cm2
Blue 1.3 nJ/cm2
Green 1 nJ/cm2
Red 0.8 nJ/cm2
At 460 nm
At 560 nm
At 660 nm
NEE
Blue 0.5 pJ/cm2
Green 0.4 pJ/cm2
Red 0.3 pJ/cm2
Blue 0.5 pJ/cm2
Green 0.4 pJ/cm2
Red 0.3 pJ/cm2
At 460 nm
At 560 nm
At 660 nm
1) Random Noise below quantization limit cannot be measured accurately; use higher bit depth or higher gain for
comparison purposes

Linea HS Series Camera User's Manual Linea HS Series Cameras •17
Super Resolution Monochrome Model
The following specifications apply to the super resolution Linea HS models
•HL-HM-32K40S
Table 8: Super Resolution Camera Model Performance Specifications
Specifications
HL-HM-32K40S
Notes
Resolution
32768 pixels x 64
16k dual array
Pixel Size
5.0 µm x 5.0 µm/2.5x2.5um
5x5um physical pixel size,
2.5x2.5 µm pixel output
Line Rate, maximum
400 kHz
32k Super Resolution modes
Line rate, min
10 kHz
Limited by dark current
Bit Depth
8-bit
Connectors and Mechanicals
HL-HM-32K40S
Notes
Typical Power Dissipation
28 W
Size Width
Height
Depth
76 mm
97 mm
140.5 mm
Cross-Scan direction
In-Scan direction
Along optical axis
Mass
1.2 kg
Optical Interface
HL-HM-32K40S
Notes
Lens Mount
M90 x 1 mm
Performance1)
HL-HM-32K40S
Notes
Random Noise
< 0.1 DN rms (16 e-)
Typical2)
Peak Responsivity
250 DN/nJ/cm2
@670 nm
Dynamic Range
70 dB
Typical2)
Full Well
50,000 e-
Typical
SEE
1 nJ/cm2
At 670 nm
NEE
< 0.4 pJ/cm2
At 670 nm
Environmental Specifications
Table 9: Environmental Specifications
Environmental Specifications
Storage temperature range
-20 °C to +80 °C
Humidity (storage and operation)
15% to 85% relative, non-condensing
MTBF (mean time between failures)
>100,000 hours, typical field operation

18 •Linea HS Series Cameras Linea HS Series Camera User's Manual
Flash Memory Size
Table 10: Camera Flash Memory Size
Camera
Flash memory size
All models
4 GByte
Certification & Compliance
Table 11: Camera Certification & Compliance
Compliance
See the Declarations of Conformity section at the end of this manual.

Linea HS Series Camera User's Manual Linea HS Series Cameras •19
Specifications: Monochrome Models
The following specifications apply to these Linea HS models:
•HL-FM-08K30H-00-R
•HL-FM-16K15A-00-R
•HL-HM-08K30H-00-R
•HL-HM-16K30H-00-R
•HL-HM-08K40H-00-R
•HL-HM-16K40H-00-R
Responsivity & QE
The following graphs show the spectral Responsivity and QE from the main array (128 stages), in
8-bit, for 8k camera models.
Figure 1: 8K Monochrome Models Spectral Responsivity & QE

20 •Linea HS Series Cameras Linea HS Series Camera User's Manual
The following graphs show the spectral Responsivity and QE from the main array (128 stages), in
8-bit, for 16k camera models.
Figure 2: 16K Monochrome Models Spectral Responsivity & QE