Teletype WorldNav 5100 Installation manual

Hardware User Guide
WorldNav 5100 Series

Use the WorldNav at your own risk. To reduce the risk of unsafe operation, please
carefully review and understand all documentation related to this product. It is
the user's responsibility to use this product prudently. This product is intended
to be used only as a navigational aid and must not be used for any purpose
requiring precise measurement of direction, distance, location, or topography.
Statistics provided such as trip time are best estimates and may not accurately
reflect true conditions. The Global Positioning System (GPS) is operated by the
United States Government, which is solely responsible for its accuracy and
maintenance. The system is subject to changes which could affect the accuracy
and performance of all GPS equipment.
For use in vehicles, it is the sole responsibility of the owner/operator of the Tele
Type GPS WorldNav to place and secure the GPS unit so that it will not interfere
with the vehicle operating controls and safety devices, obstruct the driver's view
of driving conditions, or cause damage or personal injury in the event of an
accident. Do not mount the TeleType GPS WorldNav in a place where the driver
or passengers are likely to impact it in an accident or collision. The mounting
hardware supplied by TeleType Co. is not warranted against collision damage or
the consequences thereof.
When used in vehicles, it is the sole responsibility of the driver of the vehicle to
operate the vehicle in a safe manner, to maintain full surveillance of all driving
conditions at all times, and not become distracted by the GPS system to the
exclusion of safe driving practices. It is unsafe to operate the controls of the GPS
system while you are driving. Failure by the driver of a vehicle equipped with a
Tele Type GPS system to pay full attention to operation of the vehicle and
road conditions while the vehicle is in motion could result in an accident or
collision with property damage and personal injury.
TeleType provides mapping information and programming with the understanding
that it is not guaranteed to be accurate, correct or complete and conclusions
drawn from such information are the responsibility of the user. While every effort
has been made to ensure the accuracy, correctness and timeliness of materials
presented, the maps cannot be relied on as the sole source of information for a
driver. TeleType assumes no responsibility for errors or omissions.
Disclaimer
IN NO EVENT SHALL TELETYPE CO BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE,
MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Table of Contents
01
1.1 Information Instruction 01
1.2 Safety Information 01
1.3 Safety Caution 02
1.4 Special Tips 03
05
2.2 What's in the Box 05
2.3 Illustration 06
07
3.1 Battery and Charger 07
3.2 Basic Use 08
3.3 Connection with Computer 09
operation 09
4.1 Navigation 09
4.2 Music 10
4.3 Video 11
4.4 E-book 12
4.5 Photo 13
4.6 System Settings 14
17
16
g
3.1.1 Power Supply
3.1.2 AC Adaptor
3.1.3 Vehicle charger
2.1 Function Introduction 05
3.2.1 Power Key
3.2.2 Reset Key/Power-saving Key
3.2.3 Vehicle Mount
3.2.4 SD/MMC Memory Card
4.1.1 Features
4.1.2 Use of Navigation
4.6.1 Volume Adjustment
4.6.2 Power Settings
4.6.3 Backlight Settings
4.6.4 Date/Time Settings
4.6.5 Language Settings
4.6.6 System Information
07
07
07
08
08
08
08
09
10
14
14
15
15
15
15

-1-
1.Notice
Warning
Users shall comply with the information provided in case of any
threat to personal safety.
Caution
Users shall comply with the information provided in case of any
damage to this device.
Tips
Additional information provided for user reference.
Illustration
Caution
Tips
Warning
The navigation system uses the most advanced satellite navigation technology
and a detailed street map so it can direct you to the destination easily. For best
results, read these instructions before operating.
1. Obey all traffic rules and be able to operate the vehicle safely.
2. Do not operate the system while driving. The system distracts the drivers'
attention, and should only be used when the vehicle is stopped.
3. Do not depend only on the voice navigation, which is only for reference.
Roads, traffic signs and service information constantly change; therefore drivers
should refer to current road signs when navigating. Roads change often; drivers
should take care to update maps as they become available.
4. You must notice traffic patterns before following the system information.
5. This navigation system is intended to assist drivers in making judgments about
suitable routes. Please read the Disclaimer at the beginning of this guide.
In order to prevent injury or property loss, please read and follow the following
precautions:
1. Read all instructions.
2. Keep these instructions in an appropriate location for later reference.
3. Follow all operation instructions.
4. Accessories
Do not use accessories from another manufacturer; this may equipment
malfunction.
5. Power
Only use the stated power. You must turn off the power and disconnect the
power plug on rainy days or when you won't use the unit for a long time.
6. Protect the power cord.
Make sure the power cord is out the path of foot traffic.
7. Installation and Wiring
In order to ensure safety, hire professionals to do the installation and wiring.
8. Keep away from heat.
Do not expose the device to sunshine or high temperatures. Keep it away from
heaters, generators or any other heat-producing objects.
9. Keep away from water, rain, and damp places.
10. Cleaning
To clean, wipe the device with dry and soft cloth after power-off. Do not clean
with volatile chemicals like gas or a diluting agent.
11. In the event of any of the following conditions, immediately turn off power and
contact a technician: Power cord or jack damaged;
-2-
Global Positioning System is launched and maintained by USA. This system can
receive the satellite signals from Global Orientation System. Using these
signals and vehicle inductor, the system can indicate current location and help
you find required destinations. This navigation system can select an economical
route, which isn't always the shortest routes or jam-free. Generally speaking,
the driver can reach the required destination faster with his local knowledge or
shortcut rather than this system.
This navigation system can provide visual map and voice instruction. When you
are at the crossing or near the turnoff, the device will remind you of the driving
distance and direction.

Liquid or particle enters into the device;
The device is damaged due to falling from a high place or incorrect operation.
13. LCD
Protect the LCD from dropping. If the LCD does fall and shatter, do not touch the
liquid flowing out of the device. Do not heat or scratch the LCD.
7. What is the maximum charging time?
The device will be fully charged in 3–3 ½ hours under standby mode. The device
can also be charged when in use, although charging time is longer. It is normal
for the unit to heat up while charging.
8. Normally, how many satellites can the GPS receiver capture?
Normally, GPS receivers capture 8-12 satellites; you need 3 satellites to
navigate.
9. Why don't some of the WMA files play?
Software is used to decode WMA files. Music that was not obtained legally may
not be supported by this software. Make sure that the music is obtained legally.
WMA files are copyright protected.
10. How can I keep the device from blowing a fuse when turning on the vehicle?
Turn the ignition on before powering up your GPS.
1. How does weather affect the instrument?
Severe weather like rain, thunderstorms or lightening will cause weak signals,
which will result in unstable operation of the instrument.
2. What factors may affect the GPS signal?
Close proximity to military bases. For security reasons, the signal precision for
civilian use is lower than that of the army. Therefore, precision of positioning
may be reduced.Weather factors (inclement weather may reduce the intensity
of signals and result in unstable orientation).
Positioning of the GPS unit within the vehicle:
Other devices may emit electric, electromagnetic, or wireless waves or
have a strong magnetic field.
Placing the device close to the windshield will help maximize the signal
by minimizing interference from tall buildings, cars, heat insulation covers,
metal objects and trees.
3. Why does the device not receive signal inside buildings?
The GPS can't be used in buildings because the signals are easily obstructed
by buildings and metals, and they can't penetrate through the walls of buildings.
4. Does the windshield affect the GPS signals?
If the windshield contains metal, it will have some effect on the GPS.
5. How long does the GPS take to position after being switched on?
On average, the device will take approximately 1 minute to calculate your current
position in an open space where interference is minimal. In general, it takes
about 5 minutes or less, as in accordance with standard GB/T 19392-2003-5.3.
6. What is the maximum battery time?
The device will run smoothly for a maximum of 3-4 hours with the screen
brightness set to 50%.
-3- -4-

-5-
2.Brief Introduction
>GPS Navigation
>Video format: supports ASF, AVI, WMV, MP4, 3GP
>Audio format: support WMA, MP3 and WAV
>Support LRC and Synchronized Lyric Information Display
>Photo format: support JPEG, BMP, PNG
>E-book format: support TXT
>Integrated speaker
>Support SD/MMC card
>Connect with PC directly to transmit the data.
>GPS Device with customized SD card installed
>AC Adaptor
> Vehicle Charger
>USB Cable
> Vehicle Mount
>User Manual
What's in the Box
Before using the device, make sure you have all the accessories listed below. If
any of the accessories are missing or damaged, please contact the local dealer
or agent as soon as possible.
-6-
1.Powe r Ke y = Po we r on /off/sleep
②
⑧
①
⑨
⑩
④
⑦
③
⑥
⑩
Function Introduction
5.Power Indicator = The light is
red during charging, it will turn
green when the battery is fully
charged.
9.Touch-pen
2.Reset = If the unit crashes or
works abnormally, press this key
to reset the system.
3.TMC Port / AVIN = Connect TMC
for receiving module / Connect
with outside AVIN wireless
receiver
4.MINI USB Port = Exchange the
data with PC by MINI USB cable.
6.Earphone Jack
7.SD Card Slot
8.Speaker
10.Bracket
Block Slot
11.Display
Screen
12.Microphone

Caut ion
Caution
3.Basic Operation
3.1.1 Power Supply
Tips
Tips
Under normal conditions, the battery can last
about 2~3 hours when the battery it is fully charged. The
actual time of power supply depends on how the device
is used. Some functions, like
audio/video playing and high backlight, use more battery
energy.
In addition to the built-in lithium battery, you may power the device using the
cigarette adapter cord or the AC power adapter.
When the device is not connected to the adapter, it is powered by the lithium
battery.
icon at the top right corner on the device's main menu indicates
the current remaining power.
When the device is connected to the adapter, it is powered by the external
power source.
-7-
3.1.2 AC Adaptor
3.1.3 Vehicle Charger
Use the AC adapter to charge the device before the first use.
1. Connect DC end of adapter to the power jack of device.
2. Connect the other end of adapter to the AC power jack.
When charging, the indicator is red, and the
power icon at the top right corner on the main menu is
the charge icon. After the device is fully charged, the
indicator turns green, and the power icon at the top
right corner on the main menu will be full.
Tips
Tips
1. Connect one end of the charger to the power input jack of the
device;
2. Connect the other end with the cigarette lighter adapter in order
to supply power and charge up at the same time.
Vehicle
Vehicle
Turn the vehicle on first, then power up the GPS.
3.2.2 Reset Key/Power-saving Key
3.2.4 SD/MMC Memory Card
3.2.1 Power Key
-8-
1. Power on:
When the GPS power is full or after connecting the device with outer power
supply, press the power key for few seconds to start up.
2. Sleep mode:
When the device turns on, press the power key for several seconds to enter
into sleep mode, the GPS will automatically display the last state when next
start-up.
When the system has no response, press reset key on the back of device to
re-start the system, the performances are as below:
1. There are delay and stagnation during switch interface;
2. There is no response when click the icons.
3. Power key is unavailable.
Caut ion
Caution
Caut ion
Caution
Please choose the proper position to place the car mount. Do
not block the driver's view and place the device arbitrarily
without fixing; do not fix the device in the area that the
3.2.3 Vehicle Mount
The mount consists of salver and bracket. While using the device in
the , make sure it is securely stowed in its mount on the windshield.
Vehicle
Vehicle
Correctly insert SD/MMC card into the slot, and do not remove the SD/MMC card
during operation.
Please backup the data before resetting the system.

Connect the device with computer by the USB cable. One end connects with PC
and the other end connects with the device.
1. Data transmission: There are two new "mobile disk" icons in “my computer”
after the device is successfully connected with computer, the first icon stands for
the built-in flash memory of the device, the second stands for the SD card
storage of the device.
(If the SD card is not inserted, the second icon of the disk is unavailable). Then,
you can use them as normal USB flash disk.
-9- -10-
4.Function operation
4.1.1 Features
4.1.2 Use of Navigation
Music
Caut ion
Caution
1. Please do not delete and revise the data in the
built-in flash memory of the device, in case some functions of the
device are out of work. 2. Based on Windows 98 operation
system, please install the driver before operating the device.
The operation of communication between GPS and computer are
exampled based on the Windows 98 operation system or above
version. 3. When GPS is connecting with computer by USB line,
it can not operate the current functions.
2. Safely Remove: Please remove the USB line after finishing the data
transmission (just operate it as the USB flash disk).
The device adopts an intelligent navigation system, which uses a GPS satellite
signal receiver to position the mobile vehicle precisely and display the mobile
vehicle's location on the E-map. The system will automatically calculate the best
route when users set the destination, it will help the users reach their
destinations safely and quickly. The system also can provide the functions of
visual maps, instant cartoon, voice and instruction and so on.
The device supports navigation, audio/video playing, E-book, Photo browsing,
and Bluetooth for hands-free and system setting functions. The main interface
is as follows:
Please carefully read the instruction of navigation software.
1. Click MUSIC icon on the main menu to enter into the audio folder.
Then you will find a menu that shows "SD/"MMC or "Flash" folder. Double-click
the folder to play the related file.
The function of each icon is as follows:
Return = Return to the player interface
Previous = Display the previous file
Next = Display the next file
Upward = Return to previous folder
2. Click CMF icon to open the Music player.
The function of each icon is as follows:
Caut ion
Caution
TMC function needs the support of the local information
desk to achieve the relevant functions.

Play = Play songs
Pause = Pause songs
Stop = Stop playing
Previous = Play previous song
Next = Play next song
Volume = Adjust the volume by dragging sliding block
Return = Return to the Main interface
Repeat = Repeat all songs
Random = Shuffle all songs
Play Schedule = Adjust play schedule
Folder = Return to the previous folder
Area of Lyric Display = Display the information of current LRC
lyric/play state of current song
Area of Song's Name Display = Display the name of the current song
Tips
Tips
Audio player contains the function of lyric
synchronization. Please copy both the music and lyric files
(LRC format) to the same folder in the SD card, and make
sure their names are the same.
-11- -12-
1. Click the E-Book on the main menu to enter into E-Book folder interface. The
next screen will show the two folders “SD/MMC” or “Flash”. Double click the
related folder to view the contact.
Time = Current Time/Total Time
Click the “video” icon on the main interface to enter the video folder interface.
Then you will find an interface that shows “SD/MMC” or “Flash” folder; double
click the related folder to play the related files. The function of each icon is as
follows:
The function of each icon is as follows:
Esc = Return to the main Menu
Play = Play the video file
Pause = Pause the video
Speed Up = Fast forward
Stop = Stop the video
Upward = Return to previous folder
Volume = Drag to adjust the volume
Progress Bar = Drag the bar to adjust progress
Time = Current Time/Total Time
Name = Display the name of the current file
Tips
Tips
On the playing interface, it will display the full
screen when Double click the playing area; then double
click again, it will display as normal.
Esc = Return to the main Menu
Previous = Display the previous page
Next = Display the next page
Return = Return to the main Menu
File Name = Display the current file name
Page Number = Current page number/total pages
2. Click E-Book folder to open reader
Esc = Return to the main Menu
Previous = Display the previous page
Next = Display the next page
Page
Upward = Return to the previous folder

-13- -14-
3. Click on the E-Book
Number Bar =Display the page
number
Backspace = Delete the last
character
Number Clear = Clear all fields
Jump = Jump to the page
number shown
Esc = Return to the Main Menu
Previous = Display the previous page
Next = Display the next page
Up = Return to the upper grade folder
Forward = Play the selected photo or next one
1. Click the “photo” icon on the main menu to enter the photo folder. The menu
shows “SD/MMC” or "Flash" folder. Double-click the folder to play the related file.
2. Click Photo folder icon to open the photo browser. The function of each icon
is as below：
Zoom Out = Zoom Out the current photo
Zoom In = Zoom In the current photo
Rotate = Rotate the photo 90°clockwise
Automatic Play = Play the photos from the
current file in slide mode
Previous = Display the previous photo
Next = Display the next photo
Upwards = Return to the upper level folder
Tips
Tips
1.Under the full screen, double click the photo to return to
normal mode.
2. Zooming out the photo, click the touch screen with touch
pen to play the next photo.
4.6.1 Volume and FM Transmitter
Click the "volume" icon to enter the related interface
Esc = Return to the main interface
Users click and on the screen to adjust the volume, by clicking
and on the screen which is in front of "pronounce by clicking the screen" to decide
whether the screen makes a sound or not.
4.6.2 Power Settings
Click “power” icon to enter the power setting interface. The user can check the
status bar to know the power, at the same time, you can also click or
to set the time for automatically power off.

-15- -16-
Signal-to-Noise data
Channel
Longitude
Latitude
Altitude
Satellite Info
Speed
Positioning time
4.6.3 Backlight Settings
Click ”Backlight” to enter Backlight setting interface. The user can adjust the
light clicking and ，or can click or to set the time for
automatically screen power off.
4.6.4 Date Time Settings
Click “Date Time” to enter Date Time setting interface. Status bar will show the
current separately time, date and time zone.
Separately click “time”, “date”, “time zone” to set up the time, date and time zone.
Through the GPS signals, the time setting refreshes the current time
automatically, it means that the time will temporarily return to the factory setting
time after the system reset. As soon as the GPS begins to navigate, the time will
renew to the standard time. Please note that the time setting should be
compatible with the local time.
4.6.5 Language Settings
Click “Language” icon to set the language you need.
There are 3 languages available: English , French ,and Spanish.
4.6.6 System Information
Click “System” icon to view the detailed system information.
1. Click “Screen Calibration” icon at the left corner of information box to adjust
the touch screen. Move the cursor through middle, left, right, up, down steps.
Repeat the process until the calibration is successful.
2. Click “Factory setting” icon at the right corner
of information box, the system will automatically
return to the factory setting.
3. Click “GPS Reset” icon in the middle of
information box, the system will automatically clear up the Signal-to-Noise data
received.
5. Technology Specification
Display
Precision
USB USB 2.0 full speed
RequestTemperature
Map Update the map data in SD card Version update
Refreshing rate
Hot start: ≤3 sec, average
Warm start: ≤38 sec, average
Cold start: ≤43 sec, average
Position: < 10 meters
Start-up time
-157dBm
Sensitivity
20 channels
Channels
1575.42MHz
Frequency
GPS Module
480*272（RGB）
Specification
5〞TFT-LCD, 5〞4-line-resistance touch screen
Pixel
INPUT：DC 12-24V，OUTPUT：DC 5V /1.5A
Battery
INPUT：AC 100-240V，OUTPUT：DC 5V / 2A
Car Charger
AC Adaptor
Power
Languages
TXT
JPEG, BMP, PNG
E-book
MP3、 WMA、 WAV
Photo
ASF、AVI、MP4、3GP、WMV
Audio
External Memory
Video
MAX 4G SD/MMC
64M-2G(slc)
64M
NAND Flash
ARM9 application Processor@ 400MHz
SD RAM
Windows CE5.0
CPU Frequency
OS
System
Net Weight
Dimension
Media function
Power Saving
1/second
Automatically standby mode,screen
protection(black screen)
TMC External TMC function Optional
Bluetooth Embed Bluetooth Module Bluetooth 2.0（optional）
134*88*17mm
About 222.6g
FM Frequency Range
76-108MHz（optional）
Build-in or outside Optional
Support multi-country
languages
English , French ,and Spanish.
3.7V /1400mAH（when supporting AVIN）
3.7V /1700mAH（when not support AVIN）
Continuous Operation Time
3-4 hours（voice and background light can be
adjusted to 50% when supporting AVIN），4-5
hours（voice and background light can be
adjusted to 50%,when not supporting AVIN）
Wireless Backsight

-17-
Problem Reason Action
Can not power on Low power Charge the battery
Power off suddenly Low power
Touch screen deflected
No sound
Tool low volume Turn on the volume
Insert the earphone properly
Cannot connect with PC
Poor USB cable connecti on
Refer to the 2.3 chapter, connect the USB cable well.
Calibration is not precise. Refer to 3.6.6 to calibrate your touch screen.
Poor connection between
the earphone and device
Difficulty receiving
GPS signal
Depending on environmental conditions, the intensity of the GPS signals
will vary.
It may take approximately 1-3 minutes to receive the signal.
Unable to use
navigation function Contact Customer Service.
Failure to charge AC adaptor is not
securely attached
Check that the adapter is inserted securely,
and indicator is red.
Power Key invalid,
touch screen and
display abnormal
The system crashes Press the reset key with stylus pen from the back
of the unit to reset the device.
Charge the battery
6.Troubleshooting