Teltonika FM1100 User manual

FM1100 User Manual
v0.17

2
Table of contents
1 INTRODUCTION ............................................................................................................. 6
1.1 A TTENTION .....................................................................................................................6
1.2 I NSTRUCTIONS OF SAFETY .................................................................................................6
1.3 L EGAL N OTICE ...............................................................................................................7
1.4 A BOUT DOCUMENT .........................................................................................................7
2 B SIC DESCRIPTION...................................................................................................... 7
2.1 P ACKAGE CONTENTS ......................................................................................................8
2.2 B ASIC CHARACTERISTICS .................................................................................................8
2.3 M ECHANICAL FEATURES ..................................................................................................9
2.4 E LECTRICAL CHARACTERISTICS .......................................................................................11
2.5 A BSOLUTE M A IMUM R ATINGS ......................................................................................11
3 CONNECTION, PINOUT, CCESSORIES..................................................................... 12
3.1 SIM CARD INSERT SCHEME ............................................................................................12
3.2 I NSTALLING FM1100 DRIVERS .......................................................................................13
3.3 N AVIGATE LED ............................................................................................................15
3.4 S TATUS LED..................................................................................................................15
3.5 S OCKET 2×5 ................................................................................................................15
3.6 USB.............................................................................................................................16
3.7 A CCESSORIES ...............................................................................................................17
4 FIRMW RE.................................................................................................................... 20
4.1 U PDATING FIRMWARE USING USB CABLE ........................................................................20
4.2 U PDATING FIRMWARE VIA GPRS...................................................................................21
5 OPER TION L B SICS................................................................................................ 22
5.1 O PERATIONAL PRINCIPALS ............................................................................................22
5.2 D EEP S LEEP MODE ........................................................................................................22
5.3 V IRTUAL ODOMETER ......................................................................................................23
5.4 F EATURES .....................................................................................................................23
5.4.1 Scenarios ................................................................................................... 23
5.4.2 Trip .............................................................................................................. 24
5.4.3 Geofencing............................................................................................... 24
5.4.4 iButton list ................................................................................................... 24
5.5 CONFIGURATION....................................................................................................25
5.6 C ONFIGURATOR ...........................................................................................................25
5.7 S YSTEM SETTINGS ...........................................................................................................26
5.8 R ECORDS SETTINGS .......................................................................................................27
5.9 GSM SETTINGS , GPRS PART .........................................................................................27
5.10 GSM SETTINGS , SMS PART ............................................................................................28
5.11 GSM SETTINGS , O PERATOR LIST .....................................................................................29
5.12 D ATA A CQUISITION M ODE SETTINGS ..............................................................................29
5.13 F EATURES SETTINGS ........................................................................................................32
5.13.1 Scenarios settings ..................................................................................... 33
5.13.2 Trip settings ................................................................................................ 34
5.13.3 Geofencing settings................................................................................. 35
5.14 I/O SETTINGS ................................................................................................................37
5.14.1 Monitoring ................................................................................................. 40
5.14.2 Event Generating ..................................................................................... 40
5.14.3 Hysteresis.................................................................................................... 41
6 SMS COMM ND LIST .................................................................................................. 42
6.1 SMS COMMAND LIST ....................................................................................................42
.1.1 getstatus .................................................................................................... 43

3
.1.2 getweektime............................................................................................. 43
.1.3 getops........................................................................................................ 43
.1.4 getcfgtime................................................................................................. 44
.1.5 getgps........................................................................................................ 44
.1. getver......................................................................................................... 44
.1.7 getinfo........................................................................................................ 44
.1.8 getio ........................................................................................................... 45
.1.9 readio # ..................................................................................................... 45
.1.10 setdigout ##.............................................................................................. 45
.1.11 getparam ####....................................................................................... 4
.1.12 setparam #### # .................................................................................... 4
.1.13 flush #,#,#,#,#,#,# ................................................................................... 4
7 DEBUG MODE .............................................................................................................. 47
8 P R METER LIST .......................................................................................................... 47
8.1 P ARAMETERS VALUE TYPES .............................................................................................47
8.2 S YSTEM PARAMETERS .....................................................................................................48
8.2.1 Deep Sleep Mode (ID=1000)................................................................... 48
8.2.2 Analog Input value range (ID=1001)...................................................... 48
8.2.3 Stop Detection Source (ID=1002) ........................................................... 48
8.3 R ECORDS PARAMETERS .................................................................................................48
8.3.1 Sorting (ID=1010)....................................................................................... 48
8.3.2 Active Data Link Timeout (ID=1011) ....................................................... 48
8.4 GSM PARAMETERS .......................................................................................................49
8.4.1 GPRS content activation (ID=1240)........................................................ 49
8.4.2 APN Name (ID=1242) ............................................................................... 49
8.4.3 APN username (ID=1243)......................................................................... 49
8.4.4 APN Password (ID=1244).......................................................................... 49
8.4.5 Target Server IP address (ID=1245) ......................................................... 50
8.4. Target Server Port (ID=124 ) .................................................................... 50
8.4.7 Protocol (ID=1247) .................................................................................... 50
8.4.8 SMS Login (ID=1252) ................................................................................. 50
8.4.9 SMS Password (ID=1253) .......................................................................... 50
8.4.10 SMS data sending settings (ID=1250) ..................................................... 50
8.4.11 SMS Data send week time schedule (ID=1273) .................................... 51
8.4.12 Authorized phone numbers (ID=12 0-12 9) .......................................... 51
8.4.13 Operator List (ID=1271) ............................................................................ 51
8.5 D ATA A CQUISITION M ODES PARAMETERS ......................................................................51
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters 51
8.5.1.1 Min Period (ID=1540)...............................................................................................51
8.5.1.2 Min Saved Records (ID=1543)...............................................................................51
8.5.1.3 Send Period (ID=1544)............................................................................................52
8.5.1.4 GPRS Week Time (ID=1545) ...................................................................................52
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters
52
8.5.2.1 Min Period (ID=1550)...............................................................................................52
8.5.2.2 Min Distance (ID=1551) ..........................................................................................53
8.5.2.3 Min Angle (ID=1552) ...............................................................................................53
8.5.2.4 Min Saved Records (ID=1553)...............................................................................53
8.5.2.5 Send Period (ID=1554)............................................................................................53
8.5.2.6 GPRS Week Time (ID=1555) ...................................................................................53
8.5.3 Roaming Network GSM operator code “Vehicle on STOP”
parameters 54
8.5.3.1 Min Period (ID=1560)...............................................................................................54
8.5.3.2 Min Saved Records (ID=1563)...............................................................................54
8.5.3.3 Send Period (ID=1564)............................................................................................54
8.5.3.4 GPRS Week Time (ID=1565) ...................................................................................54

4
8.5.4 Roaming Network GSM operator code “Vehicle MOVING”
parameters 54
8.5.4.1 Min Period (ID=1570)...............................................................................................54
8.5.4.2 Min Distance (ID=1571) ..........................................................................................54
8.5.4.3 Min Angle (ID=1572) ...............................................................................................55
8.5.4.4 Min Saved Records (ID=1573)...............................................................................55
8.5.4.5 Send Period (ID=1574)............................................................................................55
8.5.4.6 GPRS Week Time (ID=1575) ...................................................................................55
8.5.5 Unknown Network GSM operator code “Vehicle on STOP”
parameters 55
8.5.5.1 Min Period (ID=1580)...............................................................................................55
8.5.5.2 Min Saved Records (ID=1583)...............................................................................56
8.5.5.3 Send Period (ID=1584)............................................................................................56
8.5.5.4 GPRS Week Time (ID=1585) ...................................................................................56
8.5. Unknown Network GSM operator code “Vehicle MOVING”
parameters 5
8.5.6.1 Min Period (ID=1590)...............................................................................................56
8.5.6.2 Min Distance (ID=1591) ..........................................................................................56
8.5.6.3 Min Angle (ID=1592) ...............................................................................................56
8.5.6.4 Min Saved Records (ID=1593)...............................................................................57
8.5.6.5 Send Period (ID=1594)............................................................................................57
8.5.6.6 GPRS Week Time (ID=1595) ...................................................................................57
8.6 F EATURES P ARAMETERS .................................................................................................57
8. .1 Digital Output No.1 usage scenarios (ID=1 00) .................................... 57
8. .1 Max Acceleration Force (ID=1 02) ........................................................ 57
8. .2 Max Braking Force (ID=1 03) .................................................................. 58
8. .3 Max Cornering Angle (ID=1 04) ............................................................. 58
8. .4 Max allowed Speed (ID=1 05)................................................................ 58
8. .5 Digital Output No.2 usage scenarios (ID=1 01) .................................... 58
8. . Trip (ID=1280)............................................................................................. 58
8. .7 Start Speed (ID=1281) .............................................................................. 58
8. .8 Ignition Off Timeout (ID=1282)................................................................. 59
8. .9 Trip Continuous distance counting (ID=1283) ....................................... 59
8. .10 Geofencing............................................................................................... 59
8.6.10.1 Frame border (ID=1020).......................................................................................59
8.6.10.2 Geofence Zone #1 Shape (ID=1030)................................................................59
8.6.10.3 Geofence Zone #1 Priority (ID=1031)................................................................59
8.6.10.4 Geofence Zone #1 Generate Event (ID=1032)...............................................59
8.6.10.5 Geofence Zone #1 Longitude ( 1) (ID=1033) .................................................60
8.6.10.6 Geofence Zone #1 Latitude (Y1) (ID=1034).....................................................60
8.6.10.7 Geofence Zone #1 Longitude ( 2) (ID=1035) .................................................60
8.6.10.8 Geofence Zone #1 Latitude (Y2) (ID=1036).....................................................60
8. .11 AutoGeofencing ...................................................................................... 1
8.6.11.1 Enable/Disable (ID=1101) ....................................................................................61
8.6.11.2 Activation Timeout (ID=1102)..............................................................................61
8.6.11.3 Deactivate by (ID=1100) .....................................................................................61
8.6.11.4 AutoGeofence event Priority (ID=1103)............................................................61
8.6.11.5 AutoGeofence event generating (ID=1104) ...................................................61
8.6.11.6 Radius (ID=1105)....................................................................................................62
8. .12 iButton List (ID=1 10-1 59) ....................................................................... 2
8.7 IO PARAMETERS ...........................................................................................................62
8.7.1 IO#1 property parameter (ID=1300) ...................................................... 2
8.7.2 IO#1 priority (ID=1301).............................................................................. 2
8.7.3 IO#1 High level (ID=1302) ........................................................................ 3
8.7.4 IO#1 Low level (ID=1303) ......................................................................... 3
8.7.5 IO#1 logic operand (ID=1304) ................................................................ 3
8.7. IO#1 averaging length (ID=1305)........................................................... 3
9 MOUNTING RECOMMEND TIONS............................................................................. 65
9.1 C ONNECTING W IRES ....................................................................................................65

5
9.2 C ONNECTING P OWER S OURCE .....................................................................................65
9.3 C ONNECTING I GNITION W IRE .......................................................................................65
9.4 C ONNECTING G ROUND W IRE ......................................................................................65
9.5 C ONNECTING A NTENNAS .............................................................................................65
9.6 M ODULE I NSTALLATION .................................................................................................66
10 CH NGE LOG ......................................................................................................... 67

6
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not
isolated or the isolation is damaged, before
unplugging the power supply, do not touch
the device.
All wireless data transferring devices produce
interference that may affect other devices
which are placed nearby.
The device must be connected only by
qualified personnel.
The device must be firmly fastened in the
predefined location.
The programming must be performed using a
second class PC (with autonomic power
supply).
The device is susceptible to water and
humidity.
Any installation and/or handling during a
lightning storm are prohibited.
FM1100 has USB interface;
Please use cables provided with FM1100
device.
Teltonika is not responsible for any harm
caused by using wrong cables for PC <->
FM1100 connection.
1.2 Instructions of safety
This chapter contains information on how to operate FM1100 safely. By
following these requirements and recommendations, you will avoid dangerous
situations. You must read these instructions carefully and follow them strictly
before operating the device!

7
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V
DC. The allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FM1100 device
in an impact-proof package. Before usage, the device should be placed so that
its LED indicators are visible, which show the status of operation the device is in.
When connecting the connection (2x5) cables to the vehicle, the
appropriate jumpers of the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x5 connection must be
disconnected.
The device is designed to be mounted in a zone of limited access, which is
inaccessible for the operator. All related devices must meet the requirements of
standard EN 60950-1.
The device FM1100 is not designed as a navigational device for boats.
1.3 Legal Notice
Copyright © 2011 Teltonika. All rights reserved. Reproduction, transfer,
distribution or storage of part or all of the contents in this document in any form
without the prior written permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks
or trade names of their respective owners.
1.4 About ocument
This document contains information about the architecture, possibilities,
mechanical characteristics, and configuration of the FM1100 device.
Acronyms and terms used in document
PC – Personal Computer.
GPRS – General Packet Radio Service.
GPS – Global Positioning System.
GSM – Global System for Mobile Communications.
SMS – Short Message Service.
AC/DC – Alternating Current/Direct Current.
I/O – Input/Output.
Record – AVL data stored in FM1100 memory. AVL data contains GPS and
I/O information
AVL packet - Data packet that is being sent to server during data
transmission. AVL packet contains from 1 to 24 records.
2B SIC DESCRIPTION
FM1100 is a terminal with GPS and GSM connectivity, which is able to
determine the object’s coordinates and transfer them via the GSM network. This

8
device is perfectly suitable for applications, which need location acquirement of
remote objects. It is important to mention that FM1100 has additional inputs and
outputs, which let you control and monitor other devices on remote objects.
FM1100 also has a USB port for device status log output and entering
configurations.
2.1 Package contents
1
The FM1100 device is supplied to the customer in a cardboard box
containing all the equipment that is necessary for operation. The package
contains:
FM1100 device;
Input and output power supply cable with a 2x5 connection pins;
GPS antenna;
GSM antenna;
USB cable;
A card containing URL to download FM1100 device drivers and Configurator
software.
2.2 Basic characteristics
GSM / GPRS features:
•Teltonika TM11Q quad band module (GSM 850 / 900 / 1800 / 1900
MHz);
•GPRS class 10;
•SMS (text, data).
GPS features:
•Skytraq (Venus634LPx chipset) 65 channel receiver;
•Protocol NMEA-0183: GGA, GGL, GSA, GSV, RMC, VTG;
•Up to -161 dBm sensitivity.
Hardware features:
•Cortex®-M3 processor;
•1 MB internal Flash memory;
•Built-in movement sensor.
Interface features:
•Power supply: 10 ÷ 30V;
•USB port;
•3 digital inputs;
•1 analog input;
•2 open collector digital outputs;
•1Wire® temperature sensor
1
Package content depends on Order Code, and can be customized by customer needs.

9
•1Wire® iButton
•LEDs indicating device status.
Special features:
•Any element event triggers (external sensor, input, speed,
temperature, etc.);
•Highly configurable data acquisition and sending;
•Multiple Geo-fence areas;
•Deep sleep mode;
•Configurable scenarios available;
•Real-time process monitoring;
•Authorized number list for remote access;
•Firmware update over GPRS or USB port;
•Configuration update over GPRS, SMS or USB port;
•TCP/IP or UDP/IP protocol support;
•8000 record storing;
2.3 Mechanical features
Part name Physical specification Technical details
Navigation
LED LED
Modem LED LED
GPS GPS antenna connector
MC
GSM
GSM antenna connector
SMA female outer shell,
female inner pin
Socket 25 Tyco Micro MATE-N-LOK™
4-794628-0 or similar
USB Mini USB socket
Power supply 10...30 V DC
2W Max
Energy consumption:
GPRS: 150 mA r.m.s Max.,
Nominal: average 65 mA
r.m.s,
Deep Sleep: average less
than 2 mA
2
Operation temperature:
-25C ... +55C
Storage temperature:
-40C ... +70C
Storage relative humidity 5 ...
95 % (non condensation)
Table 1. FM1100 specifications
2
When in Deep Sleep mode no data storing and sending is activated.

10
Figure 2. FM1100 view & dimensions (tolerance ±2mm)

11
2.4 Electrical characteristics
Min. Typ. Max. Unit
Supply Voltage:
Supply Voltage (Recommended Operating
Conditions) 10 30 V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF) 120 uA
Drain current (Digital Output ON,
Recommended Operating
Conditions)
300 mA
Static Drain-Source resistance
(Digital Output ON) 300 mOhm
Digital Input:
Input resistance (DIN1, DIN2, DIN3) 15 kOhm
Input Voltage (Recommended
Operating Conditions) 0
Supply
voltag
e
V
Input Voltage threshold (DIN1) 7,5 V
Input Voltage threshold (DIN2, DIN3) 2,5 V
Analog Input:
Input Voltage (Recommended
Operating Conditions), Range1 0 10 V
Input resistance, Range1 120 kOhm
Input Voltage (Recommended
Operating Conditions) Range2 0 30 V
Input resistance, Range2 146,7 kOhm
Output Supply Voltage 1-Wire:
3
Supply Voltage 3,3 3,6 V
Output inner resistance 7 Ohm
Output current (U
out
> 3.0V) 30 mA
Short circuit current (U
out
= 0) 130 mA
2.5 Absolute Maximum Ratings
Supply Voltage (Absolute Maximum
Ratings) -32 32 V
3
1-wire Supply voltage PIN is dedicated for 1-wire devices ONLY, do not use it for any other
purpose.

12
Drain-Source clamp threshold voltage
(Absolute Maximum Ratings), ( I
drain
= 2mA ) 36 V
Digital Input Voltage (Absolute Maximum
Ratings) -32 32 V
Analog Input Voltage (Absolute Maximum
Ratings) -32 32 V
3CONNECTION, PINOUT, CCESSORIES
3.1 SIM car insert scheme

Gently open FM1100 case using screwdrivers

13

Take off FM1100 case

Insert SIM card as shown

Assemble device top part

Device is ready
3.2 Installing FM1100 rivers
Software requirements
• Operating system 32-bit and 64-bit: Windows P with SP3 or later, Windows
Vista, Windows 7.
• MS .NET Framework V3.5 or later (http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).

14
Drivers
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM11/vcpdriver_v1.3.1_setup.zip
Installing drivers
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM1100
device connected to the computer. Click 'Next' in driver installation window
(figures below):
Figure 3. Driver installation window
This will launch device driver installation wizard. In the following window click
‘Next’ button again:
Figure 4. Driver installation window
Setup will continue installing drivers and will display a window about
successful process in the end. Click 'Finish' to complete setup:

15
Figure 5. Driver installation window
You have now installed drivers for FM1100 device successfully.
3.3 Navigate LED
Behaviour Meaning
Permanently switched on GPS signal is not received
Blinking every second Normal mode, GPS is working
Off GPS is turned off because:
•Deep sleep mode
Or
•GPS antenna short circuited
3.4 Status LED
Behaviour Meaning
Blinking every second Normal mode
Blinking every 2 seconds Deep sleep mode
Blinking fast for a short
time
Modem activity
Blinking fast constantly Boot mode
Off •Device is not working
Or
•Device firmware being flashed
3.5 Socket 2 ×
××
× 5
Figure 6. 2×
××
×5 socket pinout
DIN 1 (IGNITION) 5 10 Ucc_DALLAS
DIN 2 4 9 DIN 3
OUT 1 3 8 DATA_DALLAS
OUT 2 2 7 AIN 1
VCC (10÷30)V DC(+)
1 6
GND(VCC(10÷30)V DC)(-)

16
Pin
Nr.
Pin Name Description
1 2 3
1 VCC (10÷30)V DC (+) Power supply for module. Power supply range (10...30) V DC
2 OUT 2 Digi al ou pu . Channel 2. Open collec or ou pu . Max. 300mA.
3 OUT 1 Digi al ou pu . Channel 1. Open collec or ou pu . Max. 300mA.
4 DIN 2 Digi al inpu , channel 2
5 DIN 1 Digi al inpu , channel 1 DEDICATED FOR IGNITION INPUT
6 GND(VCC(10÷30)V
DC)(-) Ground pin. (10÷30)V DC ( ― )
7 AIN 1 Analog inpu , channel 1. Inpu range: 0-30V/0-10V DC
8 DATA_DALLAS Da a channel for Dallas 1-Wire® devices
9 DIN 3 Digi al inpu , channel 3
10 Ucc_DALLAS + 3,8 V ou pu for Dallas 1-Wire® devices. (max 20mA)
Table 2. Socket 2x5 pinout description.
3.6 USB
Mini USB connector
Figure 7. Mini USB type B connector
FM1100 connected to PC creates STM Virtual COM Port, which can be used
as system port (to flash firmware and configure the device).
Figure 8. COM-Ports

17
3.7 Accessories
Note: Teltonika does not provide any additional equipment
like panic buttons, door sensors or others.
1 – Wire devices
One of the FM1100 features is realized 1-Wire® data protocol, which enables
connection of thermometer (DS1820, DS18S20 and DS18B20) and I-Button type:
DS1990A. Figures 9 and 10 shows FM1100 and 1-wire® devices connection
schemes.
Left row of pins
1W. PWR
(FM1100 – pin10)
1
Right row of pins
1W. Data
(FM1100 – pin8) 2 1
Vpp (+5 Volts DC)
– power source
for external digital
sensor
GND
(FM1100 – pin6) 3
Digital Input 4
2
Output from
external digital
sensor
Figure 9. Digital thermometer DS1820 and TTJ100 connection scheme

18
Figure 10. I-Button DS1990 connection scheme
Fuel Tank sensors
A fuel tank level sensor exists in most
of the cars, which shows the approximate
fuel level in the driver’s indicator panel. It
is possible to connect FM1100 Analog
input (if sensor returns analogue signal
proportional to fuel level). Figure shows
the connection scheme to the FM1100
and fuel tank sensor. After the connection
to the tank fuel level sensor, calibration is
needed. Calibrations needed due of the
fact that most fuel tank sensors are not
linear. Calibration is being performing by
measuring voltage dependence on
volume of fuel in tank.
larm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low
voltage. Digital inputs are used to read this information. Figure below shows how
to connect alarm button, door sensor, etc.
Figure 11. Panic button connection

19
In cases when sensor output signal is negative, an additional relay has to be
installed to convert negative signal to positive.
Figure 12. Inverting relay connection
Immobilizer relay
When connected as shown below, FM1100 disables engine starter when
output is OFF. More details about relays can be found below.
Figure 13. Immobilizer relay connection
Relays
An ordinary automotive relay is used to invert input signal or to immobilize
engine starter. Note, that they are available as 12 V or 24 V.
Figure 14. utomotive relay pinout

20
4FIRMW RE
4.1 Up ating firmware using USB cable
FM1100 functionality is always improving, new firmware versions are
developed. Current module firmware version can be retrieved from Configurator.
See configuration description for details.
Contact sales manager to get the latest firmware.
Updater is needed to update the firmware. It can be downloaded from:
http://avl1.teltonika.lt/downloads/FM11/
Firmware must to be copied to “Firmware updater” folder.
Connect FM1100 to PC with USB cable. Launch “Firmware Updater”, select
COM port, click connect and update. Update process may take up to several
minutes.
Figure 15. FM1100 firmware updater screen
Figure 16. FM firmware updating finished