Teltonika FM3622 User manual

FM3622 User Manual
V1.11
*This version is suitable for device with universal FM36YX firmware
v.01.05.06 and later versions

2
Table of contents
1 INTR DUCTI N ..................................................................................................................... 6
1.1 A TT NTION ............................................................................................................................ 6
1.2 I NSTRUCTIONS OF SAF TY ......................................................................................................... 6
1.3 L GAL N OTIC ........................................................................................................................ 7
1.4 A BOUT DOCUM NT ................................................................................................................. 7
2 BASIC DESCRIPTI N ............................................................................................................... 8
2.1 P ACKAG CONT NTS ................................................................................................................ 8
2.2 B ASIC CHARACT RISTICS ........................................................................................................... 8
2.3 T CHNICAL F ATUR S ............................................................................................................. 10
L CTRICAL CHARACT RISTICS .............................................................................................................. 11
2.4 A BSOLUT M AXIMUM R ATINGS ............................................................................................... 12
2.5 T CHNICAL I NFORMATION ABOUT INT RNAL BATT RY ................................................................... 12
3 C NNECTI N, PIN UT, ACCESS RIES.................................................................................. 13
3.1 H OW TO INS RT SIM CARD AND ATTACH BATT RY INTO FM3622 D VIC :....................................... 13
3.2 I NSTALLING FM3622 DRIV RS ................................................................................................ 15
3.3 N AVIGAT L D..................................................................................................................... 16
3.4 M OD M L D....................................................................................................................... 17
3.5 S TATUS L D ........................................................................................................................ 17
3.6 FM3622 S OCK T 2×6* ........................................................................................................ 17
3.7 USB................................................................................................................................... 18
3.8 A CC SSORI S ........................................................................................................................ 19
4 FIRMWARE .......................................................................................................................... 23
5 PERATI NAL BASICS.......................................................................................................... 24
5.1 O P RATIONAL PRINCIPALS ....................................................................................................... 24
5.2 S L P MOD S ....................................................................................................................... 25
5.2.1 Sleep mode ............................................................................................................. 25
5.2.2 Deep Sleep mode .................................................................................................... 25
5.3 V IRTUAL ODOM T R .............................................................................................................. 26
5.4 F ATUR S ............................................................................................................................ 26
5.4.1 Scenarios ................................................................................................................ 26
5.4.2 Trip.......................................................................................................................... 27
5.4.3 Geofencing.............................................................................................................. 27
5.4.4 iButton list .............................................................................................................. 28
5.5 CONFIGURATION.............................................................................................................. 28
5.6 C ONFIGURATOR .................................................................................................................... 28
5.7 R AD R CORDS ..................................................................................................................... 30
5.8 S YST M S TTINGS .................................................................................................................. 31
5.9 R CORDS S TTINGS ................................................................................................................ 33
5.10 GSM S TTINGS , GPRS PART ................................................................................................... 33
5.11 GSM S TTINGS , SMS PART .................................................................................................... 34
5.12 GSM S TTINGS , O P RATOR LIST .............................................................................................. 35
5.13 D ATA A CQUISITION M OD S TTINGS ........................................................................................ 35
5.14 F ATUR S S TTINGS ............................................................................................................... 40
5.14.1 Scenarios settings................................................................................................... 4
5.14.2 Trip settings ............................................................................................................ 41
5.14.3 Geofencing settings ................................................................................................ 42
5.14.4 SMS events ............................................................................................................. 45
5.15 I/O S TTINGS ....................................................................................................................... 50
5.15.1 Monitoring.............................................................................................................. 55
5.15.2 Event Generating.................................................................................................... 55
5.15.3 Hysteresis ............................................................................................................... 56

3
6 SMS C MMAND LIST ........................................................................................................... 56
6.1 SMS COMMAND LIST ............................................................................................................. 56
6.1.1 getstatus................................................................................................................. 58
6.1.2 getweektime........................................................................................................... 58
6.1.3 getops..................................................................................................................... 58
6.1.4 getcfgtime .............................................................................................................. 58
6.1.5 getgps..................................................................................................................... 59
6.1.6 ggps ........................................................................................................................ 59
6.1.7 getver ..................................................................................................................... 59
6.1.8 getinfo .................................................................................................................... 6
6.1.9 getio........................................................................................................................ 6
6.1.1 readio #................................................................................................................... 6
6.1.11 setdigout ## Y1 Y2 .................................................................................................. 61
6.1.12 getparam #### ....................................................................................................... 61
6.1.13 setparam ####........................................................................................................ 61
6.1.13. getparam 1271 X/212 X ......................................................................................... 61
6.1.14. setparam 1271 X/212 X.......................................................................................... 61
6.1.15 readops #................................................................................................................ 61
6.1.16 flush #,#,#,#,#,#,# ................................................................................................... 61
6.1.17 sn # ......................................................................................................................... 62
6.1.18 banlist..................................................................................................................... 62
6.1.19 crashlog .................................................................................................................. 62
6.1.2 lvcangetprog........................................................................................................... 62
6.1.21 lvcansetprog # ........................................................................................................ 62
6.1.22 lvcangetinfo............................................................................................................ 62
7 DEBUG M DE ...................................................................................................................... 63
8 PARAMETER LIST ................................................................................................................. 63
8.1 P ARAM T RS VALU TYP S ...................................................................................................... 63
8.2 S YST M PARAM T RS ............................................................................................................ 64
8.2.1 Sleep Mode (ID=1 ) ............................................................................................ 64
8.2.2 Sleep timeout (ID=2 )........................................................................................... 64
8.2.3 Analog Input value range (ID=1 1) ...................................................................... 64
8.2.4 Stop Detection Source (ID=1 2)............................................................................ 64
8.2.5 Static Navigation (ID=1 3) ................................................................................... 64
8.2.6 Ignition Source (ID=1 4)....................................................................................... 65
8.2.7 Ignition Detection(ID=1 8) ................................................................................... 65
8.2.8 Ignition Detection Timeout(ID=1 9) ..................................................................... 65
8.2.9 GNSS FIX Timeout for Time Synchronization via NTP (ID=1 7)............................. 65
8.2.1 Saving/Sending without time synchronization (ID=2 1) ........................................ 66
8.2.11 GNSS System (ID=2 2) ............................................................................................ 66
8.3 R CORDS PARAM T RS .......................................................................................................... 66
8.3.1 Sorting (ID=1 1 ) ................................................................................................... 66
8.3.2 Active Data Link Timeout (ID=1 11)....................................................................... 66
8.3.3 Server Response Timeout (ID=1 12)....................................................................... 66
8.4 GSM PARAM T RS ............................................................................................................... 67
8.4.1 GPRS content activation (ID=124 ) ........................................................................ 67
8.4.2 APN Name (ID=1242).............................................................................................. 67
8.4.3 APN username (ID=1243) ....................................................................................... 67
8.4.4 APN Password (ID=1244)........................................................................................ 67
8.4.5 Domain (ID=1245) .................................................................................................. 67
8.4.6 Target Server Port (ID=1246).................................................................................. 68
8.4.7 Protocol (ID=1247).................................................................................................. 68
8.4.8 Use 2G only (ID=1248) ........................................................................................... 68
8.4.9 SMS Login (ID=1252) .............................................................................................. 68
8.4.1 SMS Password (ID=1253)........................................................................................ 68
8.4.11 SMS Time Zone (ID=1254)....................................................................................... 68

4
8.4.12 SMS data sending settings (ID=125 )..................................................................... 69
8.4.13 SMS Data send week time schedule (ID=1273) ...................................................... 69
8.4.14 Authorized phone numbers (ID=126 -1269) .......................................................... 69
8.4.15 SMS Event PreDefined Numbers (ID=5 -5 9)................................................... 69
8.4.16 Operator List (ID=1271 X) ...................................................................................... 69
8.5 D ATA A CQUISITION M OD S PARAM T RS .................................................................................. 70
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters...................... 7
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters ..................... 71
8.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 72
8.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 73
R AD CHAPT R 8.5.1.4...................................................................................................................... 75
8.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 75
8.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 75
8.6 F ATUR S P ARAM T RS ......................................................................................................... 77
8.6.1 Green Driving scenario (ID=16 )........................................................................... 77
8.6.2 Max Acceleration Force (ID=16 2) ......................................................................... 77
8.6.3 Max Braking Force (ID=16 3)................................................................................. 77
8.6.4 Max Cornering Force (ID=16 4) ............................................................................. 77
8.6.5 Max allowed Speed (ID=16 5)................................................................................ 78
8.6.6 OverSpeeding scenario (ID=16 1) .......................................................................... 78
8.6.7 Jamming detection scenario (ID=16 6) .................................................................. 78
8.6.8 Immobilizer scenario (ID=16 7).............................................................................. 78
8.6.9 Immobilizer ignition timeout(ID=16 9) .................................................................. 78
8.6.1 iButton list checking scenario (ID=16 8) ................................................................ 78
8.6.11 Excessive Idling detection (ID=161 ) ...................................................................... 79
8.6.12 Time to stationary (ID=1611).................................................................................. 79
8.6.13 Time to movement (ID=1612)................................................................................. 79
8.6.14 Trip (ID=128 )......................................................................................................... 79
8.6.15 Start Speed (ID=1281)............................................................................................. 79
8.6.16 Ignition Off Timeout (ID=1282)............................................................................... 79
8.6.17 Trip distance mode (ID=1283) ................................................................................ 8
8.6.18 Enable odometer value setting (ID=1284).............................................................. 8
8.6.19 Continuous odometer value (ID=1285)................................................................... 8
8.6.2 Remember iButton ID, while trip is detected(ID=1286).......................................... 8
8.6.21 Geofencing.............................................................................................................. 8
8.6.22 AutoGeofencing...................................................................................................... 82
8.6.23 iButton List (ID=7 -7499).................................................................................... 83
8.7 I/O PARAM T RS .................................................................................................................. 83
8.7.1 I/O#1 Priority (ID=2 ) ......................................................................................... 83
8.7.2 I/O#1 High level (ID=2 1) ..................................................................................... 83
8.7.3 I/O#1 Low level (ID=2 2) ...................................................................................... 84
8.7.4 I/O#1 event generation type (ID=2 3).................................................................. 84
8.7.5 I/O#1 averaging length (ID=2 4).......................................................................... 84
8.8 LV-CAN F ATUR S ............................................................................................................... 85
8.8.1 CAN Mode............................................................................................................... 85
8.8.2 I\O Send as when ignition is off ........................................................................... 86
8.9 SMS V NT CONFIGURATION .................................................................................................. 86
8.9.1 I/O#1 element SMS event configuration (ID=51 )................................................ 86
9 FM3622 WITH LIGHT VEHICLES CAN ADAPTER LV-CAN200/ALL-CAN300.............................. 88
9.1 P URPOS OF L IGHT V HICL S C AN A DAPT R LV-CAN200/ALL-CAN300 ...................................... 88
9.2 LV-CAN200/ALL-CAN300 PROGRAM NUMB R S L CTION ........................................................ 89
9.2.1 LV-CAN2 /ALL-CAN3 program number configuration via SMS command ....... 89
9.2.2 Selecting LV-CAN2 /ALL-CAN3 program number manually............................. 89
9.2.3 Program number logic change ............................................................................... 9
9.3 C ONN CTING FM3622 WITH L IGHT V HICL S CAN ADAPT R ....................................................... 91
9.4 C ONN CTING L IGHT V HICL S CAN ADAPT R ............................................................................. 91
9.5 FM3622 C ONFIGURATION ..................................................................................................... 92

5
9.5.1 SCAN function......................................................................................................... 92
9.5.2 Offline configuration .............................................................................................. 93
9.6 P ARAM T RS ID ................................................................................................................... 94
9.7 SMS C ONFIGURATION ......................................................................................................... 100
9.8 CAN P ROGRAM N UMB R R QU ST BY SMS............................................................................ 102
9.9 G T LV-CAN INFO BY SMS .................................................................................................. 102
9.10 R F R NC S ....................................................................................................................... 102
10 M UNTING REC MMENDATI NS ................................................................................ 103
10.1 C ONN CTING W IR S ............................................................................................................ 103
10.2 C ONN CTING P OW R S OURC ............................................................................................... 103
10.3 C ONN CTING I GNITION W IR ................................................................................................ 103
10.4 C ONN CTING G ROUND W IR ................................................................................................ 103
10.5 C ONN CTING A NT NNAS ...................................................................................................... 104
10.6 M ODUL I NSTALLATION ....................................................................................................... 104
11 CHANGE L G................................................................................................................. 105

6
1INTR DUCTI N
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM3622 has USB interface;
Please use cables provided with FM3622 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM3622 connection.
1.2 Instructions of safety
This chapter contains information on how to operate FM3622 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device could be supplied with 10 V...30 V DC power supply. The nominal voltage is 12 V
DC. The allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FM3622 device in an impact-
proof package. Before usage, the device should be placed so that its L D indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x6) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x6 connection must be disconnected.

7
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard N 60950-1.
The device FM3622 is not designed as a navigational device for boats.
1.3 Legal Notice
Copyright © 2016 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FM3622 device.
Acronyms and terms used in document
PC – Personal Computer.
GPRS – General Packet Radio Service
GNSS – Global Positioning System
GSM – Global System for Mobile Communications
SMS – Short Message Service
AC/DC – Alternating Current/Direct Current
I/O – Input/Output
Record – AVL data stored in FM3622 memory. AVL data contains GNSS and I/O information
AVL packet – data packet that has been sent to server during data transmission. AVL packet
contains from 1 to 50 records.

8
2BASIC DESCRIPTI N
FM3622 is a terminal with GPS/GLONASS and GSM/3G connectivity with backup battery,
which is able to collect device coordinates and other useful data and transfer them via the
GSM/3G network. This device is perfectly suitable for applications where location acquirement of
remote objects is needed. It is important to mention that FM3622 has additional inputs and
outputs, which let you control and monitor other devices on remote objects. FM3622 also has a
USB port for device status log output and configuration.
2.1 Package contents
1
The FM3622 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
FM3622 device;
Input and output power supply cable with a 2x6 connection pins;
GNSS antenna;
GSM/3G antenna;
USB cable;
Li-Po battery 3.7, 170mAh
2.2 Basic characteristics
GSM / GPRS / 3G features:
•UMTS/HSPA+, GSM/GPRS/ DG module
•UMTS/HSPA+ bands depending on module:
oH 910-GL 850/900/1700/1900/2100 MHz
•HSUPA rate up to 5.76 Mbps, HSDPA rates up to 7.2 Mbps
•UMTS Uplink/Downlink up to 384 kbps
•DG uplink up to 236.8 kbps, downlink up to 118,4 kbps
•GPRS and DG class 33;
•SMS (text, data).
FM3622 Interface features:
•Power supply: 10 ÷ 30V;
•3 digital inputs;
•1 analog/digital input;
•2 open collector Digital output;
•1 Wire interface:
oTemperature sensor
oiButton
•Internal backup battery;
•2 Status L Ds:
oNavigate
oStatus
•Internal USB port;
1
Package content depends on Order Code, and can be customized by customer needs.

9
•xternal GSM antenna (RP-SMA connector) for higher sensitivity;
•xternal GNSS antenna (SMA connector) for higher sensitivity;
•Interface for LVCAN;
Hardware features:
•Cortex®-M3 processor;
•8 Mbit internal Flash memory;
•Built-in accelerometer sensor.
GNSS features:
•TG1000 engine for GNSS, GLONASS, Galileo and QZSS;
•33channel GPS/GLONASS receiver;
•Protocol NM A-0183: GGA, GGL, GSA, GSV, RMC, VTG;
•-165 dBm Tracking Sensitivity
Special features:
•Any element event triggers (external sensor, input, speed, temperature, etc.);
•Highly configurable data acquisition and sending;
•Multiple Geo-fence areas;
•Sleep mode;
•Deep sleep mode;
•Configurable scenarios available;
•Real-time process monitoring;
•Authorized number list for remote access;
•Firmware update over GPRS or USB port;
•Configuration update over GPRS, SMS or USB port;
•TCP/IP or UDP/IP protocol support;
•Up to 3854 records storing;
•Radio frequency jamming detection.
•Records exporting using USB;
•Offline working mode;
Overvoltage protection
Description Voltage Duration
Normal operation 10-30V Unlimited
Protection turns on, device turns off. 34V Unlimited
Maximum voltage <70V Unlimited
Maximum voltage impulse 90V 5 milliseconds

10
2.3 Technical features
Part name Physical specification Technical details
System L D L D
Navigation L D L D
GNSS GNSS antenna connector SMA
GSM/3G
GSM/3G antenna connector RP-
SMA female outer shell, male
inner pin
Socket 2x6 Tyco Micro MAT -N-LOK™
4-794628-0 or similar
USB Micro USB socket
Power supply 10...30 V DC
2W Max
nergy consumption:
GPRS: 150 mA r.m.s Max.,
Nominal: average 50 mA r.m.s,
GNSS Sleep
2
: average 18 mA
Deep Sleep: average less than 5 mA
3
Battery charge current: 100 mA
Rated input current: 250 mA Max.
Operation temperature:
-25⁰C ... +55⁰C
Storage temperature:
-40⁰C ... +70⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Table 1. FM3622 specifications
Figure 1. FM3622 view & dimensions (tolerance ±2mm)
2
When in Sleep mode, FM unit turns OFF GNSS module.
3
When in Deep Sleep mode no data storing and sending is activated.

11
Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTI N
Min. Typ. Max. Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions) 10 30 V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF) 120 μA
Drain current (Digital Output ON,
Recommended Operating Conditions) 1.0 A
Static Drain-Source resistance (Digital
Output ON) 300 mΩ
Digital Input:
Input resistance (DIN1,) 15 kΩ
Input resistance (DIN2, DIN3) 20 kΩ
Input resistance (DIN4) 120 kΩ
Input Voltage (Recommended Operating
Conditions) 0 Supply voltage V
Input Voltage threshold (DIN1) 7.5 V
Input Voltage threshold (DIN2) 2.5 V
Input Voltage threshold (DIN3) 2.5 V
Input Voltage threshold (DIN4) 2.5 V
Analog Input:
Input Voltage (Recommended Operating
Conditions), Range1 0 10 V
Input resistance, Range1 120 kΩ
Measurement error 0.47 %
Additional error ±17.3 mV
Input Voltage (Recommended Operating
Conditions) Range2 0 30 V
Input resistance, Range2 150 kΩ
Measurement error 1.01 %
Additional error ±139 0 mV

12
utput Supply Voltage 1-Wire:
Supply Voltage 3.3 3.6 V
Output inner resistance 7 Ω
Output current (U
out
> 3.0V) 30 mA
Short circuit current (U
out
= 0) 130 mA
2.4 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTI N
Min. Typ. Max. Unit
Supply Voltage (Absolute Maximum Ratings) -32 32 V
Drain-Source clamp threshold voltage (Absolute
Maximum Ratings), ( I
drain
= 2mA ) 36 V
Digital Input Voltage (Absolute Maximum Ratings) -32 32 V
Analog Input Voltage (Absolute Maximum Ratings) -32 32 V
2.5 Technical Information about internal battery
FM3622 internal battery is used for detecting external voltage disconnection.
CAUTION: RISK OF XPLOSION IF BATT RY IS R PLAC D BY AN INCORR CT
TYP . DISPOS OF US D BATT RI S ACCORDING TO TH INSTRUCTIONS.
Battery Disposal instructions:
Battery should not be disposed of with general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them to battery recycle bin found in stores.
Internal back-up battery
Battery voltage V Nominal capacity (mAh) Power(Wh)
Charging
temperature
range (◦C)
Li-Polymer rechargeable
battery
3,7 170 0.64 - 0.66 0 – 45

13
3C NNECTI N, PIN UT, ACCESS RIES
3.1 How to insert SIM card and attach battery into FM3622 device:

Gently open FM3622 case using screwdrivers

14

Remove FM3622 case

Insert SIM card as shown

Attach battery  Attach top housing cover

15

Device is ready
3.2 Installing FM3622 drivers
Software requirements:
• Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .N T Framework V3.5 or later (http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers:
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM36/vcpdriver_v1.3.1_setup.zip
Installing drivers:
xtract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM3622 device
connected to the computer. Click ‘Next’ in driver installation window (figures below):
Figure 2. Driver installation window

16
This will launch device driver installation wizard. In the following window click ‘Next’
button again:
Figure 3. Driver installation window
Setup will continue installing drivers and will display a window about successful process at
the end. Click ‘Finish’ to complete setup:
Figure 4. Driver installation window
You have now installed drivers for FM3622 device successfully.
3.3 Navigate LED
Behavior Meaning
Permanently switched on GNSS signal is not received
Blinking every second Normal mode, GNSS is working
Off GNSS is turned off because:
•Sleep mode
•Deep sleep mode
Or •GNSS antenna short circuited

17
3.4 Modem LED
Behavior Meaning
Blinking every second Normal mode
Blinking every 2 seconds Deep sleep mode
Blinking fast for a short time Modem activity
Blinking fast constantly Boot mode
Off •Device is not working
Or •Device firmware being flashed
3.5 Status LED
Behavior Meaning
Permanently off Device off
Blinking every 1 second Net search / Not registered/ turning off
Slow blinking every 3 seconds Registered: full service
Permanently on A call is active
3.6 FM3622 Socket 2×6*
Figure 5. 2×6 socket pinout
Figure 6. FM3622 sticker
Input 6 6 12 INPUT 5
1WIRE POWER 5 11 DIN 1
1WIRE DATA 4 10 DIN 2
OUT 1 3 9 DIN 3
OUT 2 2 8 DIN 4 / AIN 1
VCC (10÷30)V DC (+)
1 7 GND(VCC(10÷30)V DC)(-)

18
Pin
Nr.
Pin Name Description
1
VCC (10÷30) V DC (+)
Power supply for module. Power supply range
(10 ÷ 30)V DC
Energy consumption GPRS 150 mA r.m.s Max.
2
OUT 2
Digital output. Channel 2. Open collector output.
Max. 150 mA.
3
OUT 1
Digital output. Channel 1. Open collector output.
Max. 150mA.
4
1WIRE DATA
Data channel for Dallas 1-Wire® devices
5
1WIRE POWER
Power supply pin for Dallas 1-Wire® devices
6
INPUT 6
LV-CAN/ALL-CAN interface input 6 line
7
GND (-)
Ground pin.
8
DIN 4 / AIN
Digital input, channel / Analog input 0-30 V range
9
DIN 3
Digital input, channel 3
10
DIN 2
Digital input, channel 2
11
DIN 1
Digital input, channel 1
12
INPUT 5
LV-CAN/ALL-CAN interface input 5 line
Table 2. Socket 2x6 pinout description.
3.7 USB
Micro USB connector
Figure 7. Micro USB type B connector
FM3622 connected to PC creates an STM Virtual COM Port, which can be used as a system
port (to flash firmware and configure the device):
Figure 8. C M-Ports

19
3.8 Accessories
1 – Wire devices for FM3622
One of the realized features is 1-Wire® data protocol, which enables connection of
thermometer (DS1820, DS18S20 and DS18B20) and I-Button type: DS1990A (Figures 9 and 10
show FM3622 and 1-wire® device connection schemes).
Left row of pins
1W.PWR
(FM3622 – pin5) 1
Right row of pins
1W. Data
(FM3622 – pin4) 2 1
Vpp (+5 Volts DC) –
power source for
external digital
sensor
GND
(FM3622 – pin7) 3
Digital Input 4
2
Output from external
digital sensor
Figure 9. Digital thermometer DS1820 and TTJ100 connection scheme
Figure 10. I-Button DS1990A connection scheme

20
Note: Teltonika does not provide any additional equipment like panic
buttons, door sensors or others.
Fuel Tank sensors for FM3622
A fuel tank level sensor exists in most cars, which shows the approximate fuel level in the
driver’s indicator panel. It is possible to connect Analog input to FM3622 (if sensor returns
analogue signal proportional to fuel level). Figure 10 shows the connection scheme to the
FM3622 and fuel tank sensor through Analog input 1. After the connection to the tank fuel level
sensor, calibration is needed. Calibration is needed because most fuel tank sensors are not
linear. Calibration is performed by measuring voltage dependence on volume of fuel in tank.
Figure 11. Fuel Tank sensor connection
Alarm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital
inputs are used to read this information. Figure below shows how to connect alarm button, door
sensor, etc.