Teltonika FMA120 User manual

FMA120 User Manual
V1.06
*This version is suitable for device with firmware version 01.24.xx

2
Table of contents
1INTRODUCTION ..................................................................................................................... 7
1.1 ATTENTION............................................................................................................................ 7
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 7
1.3 LEGAL NOTICE........................................................................................................................ 8
1.4 ABOUT DOCUMENT ................................................................................................................. 8
2BASIC DESCRIPTION ............................................................................................................... 8
2.1 PACKAGE CONTENTS................................................................................................................ 8
2.2 BASIC CHARACTERISTICS ........................................................................................................... 8
2.3 TECHNICAL FEATURES............................................................................................................. 10
2.4 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 11
2.5 ELECTRICAL CHARACTERISTICS.................................................................................................. 12
2.6 ABSOLUTE MAXIMUM RATINGS............................................................................................... 13
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 14
3.1 HOW TO INSERT SIM CARD INTO FMA120 DEVICE: .................................................................... 14
3.2 INSTALLING FMA120 DRIVERS................................................................................................ 15
3.3 NAVIGATE LED..................................................................................................................... 17
3.4 STATUS LED ........................................................................................................................ 17
3.5 SOCKET 25........................................................................................................................ 17
3.6 USB................................................................................................................................... 18
3.7 ACCESSORIES........................................................................................................................ 19
4FIRMWARE .......................................................................................................................... 22
4.1 UPDATING FIRMWARE USING USB CABLE .................................................................................. 22
5OPERATIONAL BASICS.......................................................................................................... 23
5.1 OPERATIONAL PRINCIPALS....................................................................................................... 23
5.2 SLEEP MODES....................................................................................................................... 24
5.2.1 Sleep mode ............................................................................................................. 24
5.2.2 Deep Sleep mode .................................................................................................... 24
5.3 VIRTUAL ODOMETER.............................................................................................................. 25
5.4 FEATURES............................................................................................................................ 25
5.4.1 Scenarios ................................................................................................................ 25
5.4.2 Trip.......................................................................................................................... 26
5.4.3 Geofencing.............................................................................................................. 26
5.4.4 iButton list .............................................................................................................. 26
5.5 CONFIGURATION.............................................................................................................. 27
5.6 CONFIGURATOR.................................................................................................................... 27
5.7 RECORD STORAGE ................................................................................................................. 29
5.8 SYSTEM SETTINGS.................................................................................................................. 29
5.9 RECORDS SETTINGS................................................................................................................ 31
5.10 GSM SETTINGS,GPRS PART................................................................................................... 31
5.11 GSM SETTINGS,SMS PART .................................................................................................... 31
5.12 GSM SETTINGS,OPERATOR LIST .............................................................................................. 33
5.13 DATA ACQUISITION MODE SETTINGS ........................................................................................ 34
5.14 FEATURES SETTINGS............................................................................................................... 39
5.14.1 Scenarios settings................................................................................................... 39
5.14.2 Trip settings ............................................................................................................ 40
5.14.3 Geofencing settings ................................................................................................ 42
5.14.4 SMS events ............................................................................................................. 44
5.14.4.1 SMS events configuration................................................................................................ 46
5.15 I/O SETTINGS ....................................................................................................................... 50
5.15.1 Monitoring.............................................................................................................. 52
5.15.2 Event Generating.................................................................................................... 53
5.15.3 Hysteresis ............................................................................................................... 53

3
6SMS COMMAND LIST ........................................................................................................... 54
6.1 SMS COMMAND LIST............................................................................................................. 54
6.1.1 getstatus................................................................................................................. 55
6.1.2 getweektime........................................................................................................... 56
6.1.3 getops..................................................................................................................... 56
6.1.4 getcfgtime .............................................................................................................. 56
6.1.5 getgps..................................................................................................................... 56
6.1.6 ggps ........................................................................................................................ 56
6.1.7 getver ..................................................................................................................... 57
6.1.8 getinfo .................................................................................................................... 57
6.1.9 getio........................................................................................................................ 57
6.1.10 readio #................................................................................................................... 58
6.1.11 setdigout ## Y1 Y2 .................................................................................................. 58
6.1.12 setdigoutX Z Y ......................................................................................................... 58
6.1.13 getparam #### ....................................................................................................... 58
6.1.14 setparam ####........................................................................................................ 58
6.1.15 getparam 1271 X/212 X ......................................................................................... 58
6.1.16 setparam 1271 X/212 X .......................................................................................... 58
6.1.17 readops #................................................................................................................ 59
6.1.18 flush #,#,#,#,#,#,# ................................................................................................... 59
6.1.19 sn # ......................................................................................................................... 59
6.1.20 banlist..................................................................................................................... 59
6.1.21 crashlog .................................................................................................................. 59
6.1.22 lvcangetprog........................................................................................................... 59
7DEBUG MODE ...................................................................................................................... 60
8PARAMETER LIST ................................................................................................................. 61
8.1 PARAMETERS VALUE TYPES...................................................................................................... 61
8.2 SYSTEM PARAMETERS ............................................................................................................ 61
8.2.1 Sleep Mode (ID=1000) ............................................................................................ 61
8.2.2 Sleep timeout (ID=200) ........................................................................................... 61
8.2.3 Analog Input value range (ID=1001) ...................................................................... 61
8.2.4 Stop Detection Source (ID=1002)............................................................................ 61
8.2.5 Static Navigation (ID=1003) ................................................................................... 62
8.2.6 Ignition source (ID=1004) ....................................................................................... 62
8.2.7 Power Voltage High Level (ID=1005) ...................................................................... 62
8.2.8 Power Voltage Low Level (ID=1006) ....................................................................... 62
8.2.9 Saving/Sending without time synchronization (ID=201) ........................................ 62
8.2.10 GNSS System (ID=202) ............................................................................................ 62
8.2.11 GNSS fix Timeout (ID=1007) ................................................................................... 63
8.2.12 NTP Time Synchronization (ID=1008) ..................................................................... 63
8.3 RECORDS PARAMETERS .......................................................................................................... 63
8.3.1 Sorting (ID=1010) ................................................................................................... 63
8.3.2 Active Data Link Timeout (ID=1011)....................................................................... 63
8.3.3 Server Response Timeout (ID=1012)....................................................................... 63
8.4 GSM PARAMETERS ............................................................................................................... 64
8.4.1 GPRS content activation (ID=1240) ........................................................................ 64
8.4.2 APN Name (ID=1242).............................................................................................. 64
8.4.3 APN username (ID=1243) ....................................................................................... 64
8.4.4 8.4.4 APN Password (ID=1244)............................................................................... 64
8.4.5 Domain (ID=1245) .................................................................................................. 65
8.4.6 Target Server Port (ID=1246).................................................................................. 65
8.4.7 Protocol (ID=1247).................................................................................................. 65
8.4.8 Always online (ID=1248)......................................................................................... 65
8.4.9 SMS Login (ID=1252) .............................................................................................. 65
8.4.10 SMS Password (ID=1253)........................................................................................ 65
8.4.11 SMS data sending settings (ID=1250)..................................................................... 66

4
8.4.12 SMS Data send week time schedule (ID=1273) ...................................................... 66
8.4.13 Authorized phone numbers (ID=1260-1270) .......................................................... 66
8.4.14 SMS Event PreDefined Numbers (ID=150-159)....................................................... 66
8.4.15 Operator List (ID=1271 X) ....................................................................................... 66
8.4.16 Black Operator list (ID= 1272 X) ............................................................................. 67
8.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 67
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters ...................... 67
8.5.1.1 Min Period (ID=1540) ......................................................................................................... 67
8.5.1.2 Min Saved Records (ID=1543)............................................................................................. 67
8.5.1.3 Send Period (ID=1544)........................................................................................................ 67
8.5.1.4 GPRS Week Time (ID=1545)................................................................................................ 67
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters..................... 68
8.5.2.1 Min Period (ID=1550) ......................................................................................................... 68
8.5.2.2 Min Distance (ID=1551)...................................................................................................... 68
8.5.2.3 Min Angle (ID=1552) .......................................................................................................... 68
8.5.2.4 Min Saved Records (ID=1553)............................................................................................. 69
8.5.2.5 Send Period (ID=1554) ....................................................................................................... 69
8.5.2.6 GPRS Week Time (ID=1555)................................................................................................ 69
8.5.2.7 Min Speed (ID=1556).......................................................................................................... 69
8.5.2.8 Min Speed Source (ID=1557) .............................................................................................. 69
8.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 69
8.5.3.1 Min Period (ID=1560) ......................................................................................................... 69
8.5.3.2 Min Saved Records (ID=1563)............................................................................................. 70
8.5.3.3 Send Period (ID=1564)........................................................................................................ 70
8.5.3.4 GPRS Week Time (ID=1565)................................................................................................ 70
8.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 70
8.5.4.1 Min Period (ID=1570) ......................................................................................................... 70
8.5.4.2 Min Distance (ID=1571)...................................................................................................... 70
8.5.4.3 Min Angle (ID=1572) .......................................................................................................... 70
8.5.4.4 Min Saved Records (ID=1573)............................................................................................. 71
8.5.4.5 Send Period (ID=1574)........................................................................................................ 71
8.5.4.6 GPRS Week Time (ID=1575)................................................................................................ 71
8.5.4.7 Min Speed (ID=1576).......................................................................................................... 71
8.5.4.8 Min Speed Source (ID=1577) .............................................................................................. 71
8.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 72
8.5.5.1 Min Period (ID=1580) ......................................................................................................... 72
8.5.5.2 Min Saved Records (ID=1583)............................................................................................. 72
8.5.5.3 Send Period (ID=1584)........................................................................................................ 72
8.5.5.4 GPRS Week Time (ID=1585)................................................................................................ 72
8.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 72
8.5.6.1 Min Period (ID=1590) ......................................................................................................... 72
8.5.6.2 Min Distance (ID=1591)...................................................................................................... 72
8.5.6.3 Min Angle (ID=1592) .......................................................................................................... 73
8.5.6.4 Min Saved Records (ID=1593)............................................................................................. 73
8.5.6.5 Send Period (ID=1594)........................................................................................................ 73
8.5.6.6 GPRS Week Time (ID=1595)................................................................................................ 73
Read chapter 8.5.1.4........................................................................................................................... 73
8.5.6.7 Min Speed (ID=1596).......................................................................................................... 73
8.5.6.8 Min Speed Source (ID=1597) .............................................................................................. 74
8.6 FEATURES PARAMETERS ......................................................................................................... 74
8.6.1 Green driving scenario (ID=1890) ........................................................................... 74
8.6.2 Green Driving digital output control (ID=1891) ...................................................... 74
8.6.3 Max Acceleration Force (ID=1892) ......................................................................... 74
8.6.4 Max Braking Force (ID=1893) ................................................................................. 74
8.6.5 Max Cornering Force (ID=1894) ............................................................................. 74
8.6.6 Overspeeding scenario (ID=1895)........................................................................... 75
8.6.7 Over Speeding digital output control (ID=1896)..................................................... 75
8.6.8 Max allowed speed (ID=1897) ................................................................................ 75
8.6.9 Jamming scenario (ID=1898) .................................................................................. 75
8.6.10 Jamming digital output control (ID=1899) ............................................................. 75
8.6.11 Jamming sensitivity (ID=1900)................................................................................ 75

5
8.6.12 Jamming Timeout (ID=1901) .................................................................................. 76
8.6.13 Jamming Pulse duration (ID=1902) ........................................................................ 76
8.6.14 Immobilizer scenario (ID=1903).............................................................................. 76
8.6.15 Immobilizer digital output control (ID=1904) ......................................................... 76
8.6.16 iButton list checking (ID=1905)............................................................................... 76
8.6.17 Trip (ID=1280)......................................................................................................... 76
8.6.18 Start Speed (ID=1281)............................................................................................. 77
8.6.19 Ignition Off Timeout (ID=1282)............................................................................... 77
8.6.20 Trip Continuous distance counting (ID=1283) ........................................................ 77
8.6.21 Remember iButton ID (ID=1284) ............................................................................ 77
8.6.22 Odometer value (ID=1285) ..................................................................................... 77
8.6.23 Geofencing.............................................................................................................. 77
8.6.23.1 Frame border (ID=1020)................................................................................................... 77
8.6.23.2 Geofence Zone #1 Shape (ID=1030) ................................................................................. 78
8.6.23.3 Geofence Zone #1 Priority (ID=1031)................................................................................ 78
8.6.23.4 Geofence Zone #1 Generate Event (ID=1032)................................................................... 78
8.6.23.5 Geofence Zone #1 Longitude (X1) (ID=1033) .................................................................... 78
8.6.23.6 Geofence Zone #1 Latitude (Y1) (ID=1034)....................................................................... 78
8.6.23.7 Geofence Zone #1 Longitude (X2) (ID=1035) .................................................................... 78
8.6.23.8 Geofence Zone #1 Latitude (Y2) (ID=1036) ..................................................................... 79
8.6.24 AutoGeofencing...................................................................................................... 79
8.6.24.1 Enable/Disable (ID=1101)................................................................................................. 79
8.6.24.2 Activation Timeout (ID=1102) .......................................................................................... 79
8.6.24.3 Deactivate by (ID=1100)................................................................................................... 79
8.6.24.4 AutoGeofence event Priority (ID=1103)............................................................................ 80
8.6.24.5 AutoGeofence event generating (ID=1104)...................................................................... 80
8.6.24.6 Radius (ID=1105) .............................................................................................................. 80
8.6.25 Button List (ID=1610-1659) .................................................................................... 80
8.7 I/O PARAMETERS.................................................................................................................. 80
8.7.1 I/O#1 property parameter (ID=1300) ..................................................................... 80
8.7.2 I/O#1 priority (ID=1301) ......................................................................................... 81
8.7.3 I/O#1 High level (ID=1302) ..................................................................................... 81
8.7.4 I/O#1 Low level (ID=1303) ...................................................................................... 81
8.7.5 I/O#1 logic operand (ID=1304) ............................................................................... 81
8.7.6 I/O#1 averaging length (ID=1305).......................................................................... 81
8.8 LV-CAN PARAMETERS........................................................................................................... 83
8.8.1 LVCAN mode (ID=1600) .......................................................................................... 83
8.8.2 Send data with 0, if ignition is off (ID=1601) .......................................................... 83
8.9 SMS EVENT CONFIGURATION .................................................................................................. 83
8.9.1 I/O#1 element SMS event configuration (ID=100).................................................. 83
9FMA120 WITH LV-CAN200 AND ALL-CAN300 CAN ADAPTERS.............................................. 87
9.1 PURPOSE OF CAN ADAPTERS LV-CAN200 AND ALL-CAN300 ..................................................... 87
9.2 LV-CAN200 AND ALL-CAN300 PROGRAM NUMBER SELECTION .................................................. 88
9.2.1 LV-CAN200 and ALL-CAN300 program number configuration via SMS command. 88
9.2.2 Selecting LV-CAN200 and ALL-CAN300 program number manually ...................... 88
9.3 SIMPLE-CAN -CONTACTLESS CAN-BUS READER ............................................................................ 89
9.3 CONNECTING FMA120 CAN ADAPTERS ALL-CAN300 AND LV-CAN200 ...................................... 90
FMA110 CONFIGURATION................................................................................................................. 91
9.4 PARAMETERS ID ................................................................................................................... 95
9.5 SMS CONFIGURATION......................................................................................................... 101
9.6 CAN PROGRAM NUMBER REQUEST BY SMS............................................................................ 102
9.7 GET CAN INFO BY SMS ....................................................................................................... 103
9.8 CLEAR COUNTED PARAMETERS VALUE ..................................................................................... 103
10 MOUNTING RECOMMENDATIONS ................................................................................ 103
10.1 CONNECTING WIRES............................................................................................................ 103
10.2 CONNECTING POWER SOURCE............................................................................................... 103
10.3 CONNECTING IGNITION WIRE................................................................................................ 103

6
10.4 CONNECTING GROUND WIRE................................................................................................ 104
11 CHANGE LOG................................................................................................................. 106

7
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FMA120 has USB interface;
Please use cables provided with FMA120 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FMA120 connection.
1.2 Instructions of safety
This chapter contains information on how to operate FMA120 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FMA120 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x5) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x5 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
The device FMA120 is not designed as a navigational device for boats.

8
1.3 Legal Notice
Copyright © 2016 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FMA120 device.
Acronyms and terms used in document
PC –Personal Computer.
GPRS –General Packet Radio Service
GPS –Global Positioning System
GSM –Global System for Mobile Communications
SMS –Short Message Service
AC/DC –Alternating Current/Direct Current
I/O –Input/Output
Record –AVL data stored in FMA120 memory. AVL data contains GPS and I/O information
AVL packet - data packet that is being sent to server during data transmission. AVL packet
contains from 1 to 50 records.
2BASIC DESCRIPTION
FMA120 is a terminal with GPS and GSM connectivity, which is able to determine the
object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for
applications, which need location acquirement of remote objects. It is important to mention that
FMA120 has additional inputs and outputs, which let you control and monitor other devices on
remote objects. FMA120 also has a USB port for device status log output and entering
configurations.
2.1 Package contents
1
The FMA120 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
FMA120 device;
Input and output power supply cable with a 2x5 connection pins;
USB cable;
170mAh Li-ion rechargeable 3,7V battery
2.2 Basic characteristics
GSM / GPRS features:
•Quad band supported (GSM 850 / 900 / 1800 / 1900 MHz);
•GPRS Multi-Slot Class 12(up to 240 kbps);
1
Package content depends on Order Code, and can be customized by customer needs.

9
•GPRS Mobile Station Class B;
•SMS (text, data).
GNSS features:
•Tracking: 33/ 99 acquisition channels;
•Up to -165 dBm sensitivity;
•Hot start < 1s;
•Warm start < 25s;
•Cold start < 35s;
•NMEA -183 protocol;
•GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS;
•Accuracy < 3m.
Hardware features:
•Cortex®-M3 processor;
•1 MB internal Flash memory;
•Built-in accelerometer.
•170mAh Li-ion rechargeable 3,7V battery
Interface features:
•Power supply: 10 ÷ 30V;
•USB port;
•3 digital inputs;
•1 analog input;
•2 open collector digital outputs;
•1Wire® temperature sensor
•1Wire® iButton
•LEDs indicating device status.
Special features:
•Any element event triggers (external sensor, input, speed, temperature, etc.);
•Highly configurable data acquisition and sending;
•Multiple Geo-fence areas;
•Sleep mode;
•Deep sleep mode;
•Configurable scenarios available;
•Real-time process monitoring;
•Authorized number list for remote access;
•Firmware update over GPRS or USB port;
•Configuration update over GPRS, SMS or USB port;
•TCP/IP or UDP/IP protocol support;
•3500 record storing.
Overvoltage protection (new devices with order code FMA120 Vxxxxx):

10
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off.
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 mili seconds
2.3 Technical features
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 10...30 V DC
2W Max
Energy consumption1:
GPRS: 120 mA r.m.s Max.,
Nominal: average 65 mA r.m.s,
Deep Sleep: average less than
5 mA2
Battery charge current:
average 115 mA,
Operation temperature:
-25⁰C ... +55⁰C
Storage temperature:
-40⁰C ... +70⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Modem LED
LED
Socket 2x5
Tyco Micro MATE-N-LOK™
4-794628-0 or similar
USB
Mini USB socket
Table 1. FMA120 specifications
1Energy consumption has been tested at 12V voltage with no battery charging.
2When in Deep Sleep mode no data storing and sending is activated.

11
Figure 1 FMA120 view & dimensions (tolerance ±2mm)
2.4 Technical Information about internal battery
FMA120 internal battery is used for detecting external voltage disconnection.
Internal back-up battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Charging
temperature
range (◦C)
Li-Polymer rechargeable
battery
3.75～3.90
170
0.64 - 0.66
0 - 45
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery Disposal instructions:
Battery should not be disposed of with general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them to battery recycle bin found in stores.

12
2.5 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
5
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
uA
Drain current (Digital Output ON,
Recommended Operating Conditions)
300
mA
Static Drain-Source resistance (Digital
Output ON)
300
mOhm
Digital Input:
Input resistance (DIN1)
120
kOhm
Input resistance (DIN2, DIN3)
15
kOhm
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input Voltage threshold (DIN1)
7,5
V
Input Voltage threshold (DIN2, DIN3)
2,6
V
Digital Output (Open Drain grade):
Drain Current (Digital Output OFF)
120
uA
Drain Current (Digital Output ON,
Recommended Operating Conditions)
3,3
A
Static Drain-Source Resistance (Digital
Output ON)
300
mOhm
Analog Input:
Input Voltage (Recommended Operating
Conditions), Range1
0
10
V
Input resistance, Range1
120
kOhm
Measurement error
4,4
%
Additional error
±26
mV
Input Voltage (Recommended Operating
Conditions) Range2
0
30
V
Input resistance, Range2
146,7
kOhm
Measurement error
4
%
Additional error
±40
mV

13
Output Supply Voltage 1-Wire:3
Supply Voltage
3,3
3,6
V
Output inner resistance
10
Ohm
Output current (Uout > 3.0V)
30
mA
Short circuit current (Uout = 0)
130
mA
Note: Analog Input error margin can increase if temperature varies. If Analog
input is not connected FMA120 will still measure certain numbers and it cannot
be 0. This measurement is influenced by hardware components.
2.6 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
32
V
Drain-Source clamp threshold voltage (Absolute
Maximum Ratings), (Idrain = 2mA)
36
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V
Analog Input Voltage (Absolute Maximum Ratings)
-32
32
V
3
1-wire Supply voltage PIN is dedicated for 1-wire devices ONLY, do not use it for any other purpose.

14
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert SIM card into FMA120 device:

Gently open FMA120 case using screwdrivers

Remove FMA120 case

Insert SIM card as shown

15

Unscrew antenna holding screw

Insert battery wire to connector

Attach top housing cover

Device is ready
3.2 Installing FMA120 drivers
Software requirements:
•Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .NET Framework V3.5 or later (http://www.microsoft.com).
Drivers:
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM11YX/vcpdriver_v1.3.1_setup.zip
Installing drivers:
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FMA120 device
connected to the computer. Click 'Next' in driver installation window (figures below):

16
Figure 2 Driver installation window
This will launch device driver installation wizard. In the following window click ‘Next’
button again:
Figure 3 Driver installation window
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:
Figure 4 Driver installation window
You have now installed drivers for FMA120 device successfully.

17
3.3 Navigate LED
Behaviour
Meaning
Permanently switched on
GPS signal is not received
Blinking every second
Normal mode, GPS is working
Off
GPS is turned off because:
•Deep sleep mode
Or
•GPS module is turned off
3.4 Status LED
Behaviour
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
•Device is not working
Or
•Device firmware being flashed
3.5 Socket 2  5
DIN 1 (IGNITION)
5
10
Ucc_DALLAS
DIN 2
4
9
DIN 3
OUT 1
3
8
DATA_DALLAS
OUT 2
2
7
AIN 1
VCC (1030)V DC(+)
1
6
GND(VCC(1030)V DC)(-)
Figure 5 2x5 socket pinout

18
Pin
Nr.
Pin Name
Description
1
VCC (1030)V DC (+)
Power supply for module. Power supply range (10...30) V DC
2
OUT 2
Digital output. Channel 2. Open collector output. Max. 300mA.
3
OUT 1
Digital output. Channel 1. Open collector output. Max. 300mA.
4
DIN 2
Digital input, channel 2
5
DIN 1
Digital input, channel 1 DEDICATED FOR IGNITION INPUT
6
GND(VCC(1030)V DC)(-)
Ground pin. (1030)V DC ( ― )
7
AIN 1
Analog input, channel 1. Input range: 0-30V/0-10V DC
8
DATA_DALLAS
Data channel for Dallas 1-Wire® devices
9
DIN 3
Digital input, channel 3
10
Ucc_DALLAS
+ 3,8 V output for Dallas 1-Wire® devices. (max 20mA)
Table 2. Socket 2x5 pinout description
3.6 USB
Mini USB connector
Figure 6 Mini USB type B connector
FMA120 connected to PC creates an STM Virtual COM Port, which can be used as a system
port (to flash firmware and configure the device):
Figure 7 COM-Ports

19
3.7 Accessories
Note: Teltonika does not provide any additional equipment like panic buttons,
door sensors or others.
1 –Wire devices
One of the realized features FMA120 is 1-Wire® data protocol, which enables connection
of thermometer (DS1820, DS18S20 and DS18B20) and I-Button type: DS1990A (Figures 8 and 9
show FMA120 and 1-wire® device connection schemes).
Left row of pins
1
3
4
1
2
2
J1
J2
J3
U1
Right row of pins
1W. PWR
(FMA120 –pin10)
1
1W. Data
(FMA120 –pin8)
2
1
Vpp (+5 Volts DC) –
power source for
external digital
sensor
GND
(FMA120 –pin6)
3
2
Output from external
digital sensor
Digital Input
4
Figure 8 Digital thermometer DS1820 and TTJ100 connection scheme

20
Figure 9 I-Button DS1990A connection scheme
Fuel Tank sensors
A fuel tank level sensor exists in most cars, which shows the
approximate fuel level in the driver’s indicator panel. It is possible
to connect FMA120 Analog input to it (if sensor returns analogue
signal proportional to fuel level). Figure shows the connection
scheme to the FMA120 and fuel tank sensor. After the connection
to the tank fuel level sensor, calibration is needed. Calibration is
needed because most fuel tank sensors are not linear. Calibration
is performed by measuring voltage dependence on volume of fuel
in tank.
Alarm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital
inputs are used to read this information. Figure below shows how to connect alarm button, door
sensor, etc.
Figure 11 Panic button connection
Figure 10 Fuel sensor scheme