Teltonika TMT250 User manual

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
TMT250 First Start
From Wiki Knowledge Base | Teltonika Mobility
Main Page > Personal Trackers > TMT250 > TMT250 First Start
Contents
1 How to insert micro SIM card and connect the battery to TMT250
1.1 Correct Battery Connection
1.2 PC Connection (Windows)
1.3 How to install USB drivers (Windows)
1.4 Conguration (Windows)
1.5 Quick SMS conguration
1.6 Precautions
How to insert micro SIM card and connect the battery to TMT250
1. Unscrew 4 screws counterclockwise.
2. Remove the cover.
3. Insert Micro-SIM card as shown. Make sure that Micro-SIM card cut-o corner is pointing forward to slot.
4. Connect the battery as shown to the device.
5. Attach device cover back and screw in all 4 screws.
6. Device is ready to be used.

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
NOTE: In order to prevent device's cover from mechanical damage it is recommended to use screwdriver, which is included in the package.
Correct Battery Connection

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
PC Connection (Windows)
1. Connect device to computer using Magnetic USB cable or Bluetooth connection:
Using Magnetic USB cable
You will need to install USB drivers, see "How to install USB drivers (Windows)"
Using Bluetooth
TMT250 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth.
Choose your device named – “TMT250_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect
and then select Done.
2. You are now ready to use the device on your computer.

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
How to install USB drivers (Windows)
1. Please download COM port drivers from Teltonika here (https://teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip).
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the conrmation window will appear. Click Finish to complete the setup.
Conguration (Windows)
At rst TMT250 device will have default factory settings set. These settings should be changed according to the user's needs.
Main conguration can be performed via Teltonika Congurator software. Get the latest TMT250 Congurator version from here. Congurator
operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements
Operating system MS .NET Framework
version Version Link
Windows
Vista
Windows 7
Windows
8.1
Windows 10
MS .NET Framework 4.6.2 32 and 64
bit
www.microsoft.com
(https://dotnet.micro
soft.com/en-us/down
load/dotnet-framewo
rk)
Downloaded Congurator will be in compressed archive. Extract it and launch Congurator.exe. After launch software language can be changed
by clicking in the right bottom corner:

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
Conguration process begins by pressing on connected device:
After connection to Congurator Status window will be displayed:

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. TMT250 has one user editable prole, which can
be loaded and saved to the device. After any modication of conguration the changes need to be saved to device using Save to device button.
Main buttons oer following functionality:
1. Load from device – loads conguration from device.
2. Save to device – saves conguration to device.
3. Load from le – loads conguration from le.
4. Save to le – saves conguration to le.
5. Update rmware – updates rmware on device.
6. Read records – read records from device.
7. Reboot device – restarts device.
8. Reset conguration – sets device conguration to default.

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
Most important congurator section is GPRS – where all your server and GPRS settings can be congured and Data Acquisition – where data
acquiring parameters can be congured. More details about TMT250 conguration using Congurator can be found here.
Quick SMS conguration
Default conguration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
Note: Before SMS text, two space symbols should be inserted.
Default conguration settings
Movement detection:
Movement will be detected by
accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes Angle dierence between last coordinate
and current position is greater than 10°
GPRS settings:
2001 – APN
2002 – APN username (if there are no APN username, empty eld
should be left)
2003 – APN password (if there are no APN password, empty eld
should be left)
Server settings:
2004 – Domain
2005 – Port
2006 – Data sending protocol (0 – TCP, 1 – UDP)

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
degrees
Traveled distance is more than 100
meters
Speed dierence between last coordinate
and current position is greater than 10
km/h
Device makes a record On Stop if:
1 hour passes while device is
stationary
Records sending to server:
If device has made a record it is sent
to the server every 120 seconds
After successful SMS conguration, TMT250 device will synchronize time and update records to congured
server. Time intervals and default I/O elements can be changed by using Teltonika Congurator or SMS
parameters.
Precautions

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
Operate the device in suitable conditions
Do not use the device where mobile connectivity is forbidden.
Road safety rst
Comply with local trac laws, always hold your hands on a steering wheel when using a device. Your safety is of utmost importance when you drive.
Interference
All wireless devices are sensitive to electromagnetic interference, as a result wireless devices aect the performance of each other.
Limit the use of device in hospitals
Please follow all restrictions. Turn o the device in the vicinity of medical devices when required.
Limit the use of device in vehicles
Please follow all restrictions. Wireless devices can interfere with other electronic equipment in vehicles.
Be cautious near ammable materials and liquids
Charging precautions
SELV LPS chargers, personal computers or laptops that device will be connected to must comply with the requirements of IEC 60950:2005 standard.
Use only original batteries
Using uncertied manufacturer or dierent type batteries may cause an explosion.
Use batteries safely
Protect batteries from moisture. Place them in a cool and dry place when storing. Avoid extensive operation at high temperatures. Do not attempt charging battery
directly from the electrical mains. All utilised batteries shall comply with IEC 62133.

Saltoniškių g. 9B-1,
LT-08105 Vilnius
Tel. [phone]
Faks. [phone]
www.teltonika-iot-group.com
[email protected]
Power supplies
Power supply circuits used to charge the device connection must have safeguards, which prevent power leakage, short circuits or incorrect electrical grounding. Any
used switches ought to be installed in a readily accessible location. Power must be uninterrupted and the distance between the contacts must be 3 mm or larger.
Remove device safely
Device must be disconnected from computer or charger by unplugging the magnetic USB cable from the device.
Other
In order to prevent device from mechanical damage it is advisable to transport it in a shock–resistant packaging. If device stopped working properly regardless of the
settings only a qualied specialist can help. It is recommended to contact your local seller or your UAB Teltonika manager in such a case.
Use the right screwdriver
In order to prevent device's cover from mechanical damage it is recommended to use screwdriver, which is included in the package. Do not use electrical screwdrivers.
https://teltonika-mobility.com/product/mini-tracker-easy/
Retrieved from "https://wiki.teltonika-mobility.com/wikibase/index.php?title=TMT250_First_Start&oldid=60414"