Teltonika RUT240 User manual

Namespaces
PagePage
Variants
Views
Read
View source
View history
More
Download as PDF
Read
View source
View history
Page
Discussion
Search
Search Teltonika Networks
Search
Go
QSG RUT240
From Teltonika Networks Wiki
Main Page > RUT Routers > RUT240 > QSG RUT240
English
日本
This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUT240 LTE Router. Here you will nd an overview of the various
components on the front and back of a RUT240 device, hardware installation instructions, rst login information, device specications, and general
safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed
version of the Quick Start Guide in the packaging box of your device.
Contents
1 Safety information
1.1 General
1.2 RF exposure
1.3 Operating
conditions
1.4 Faulty and
damaged
products
1.5 Electrical
safety
1.6 Product
handling
2 Front view
3 Back view
4 Connectors
5 Video Quick Start
Guide
6 Video Quick Start
Guide
7 Hardware installation

8 Congure your
computer (Windows)
9 Login to device
10 SIM card
recommendations
Safety information
Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions
presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully
follow the safety instructions and recommendations provided with the device.
General
Radio specications
RF technologies 2G, 3G, 4G, WiFi
Max RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@WiFi
Bundled accessories specifications*
Power adapter Input: 0.45A@100-240 VAC, Output: 9 VDC, 1A, 4-pin plug
Mobile antenna 698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 4 dBi, omnidirectional, SMA male connector
WiFi antenna 2400~2500 MHz, 50Ω, VSWR<2.5, gain** 5dBi, omnidirectional, RP-SMA male connector
* Order code dependant.
** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
RUT240 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the
utilization of the communication module in prescribed applications and environments.
CE Declaration of Conformity

[BG] Bulgarian С настоящето, TELTONIKA NETWORKS декларира, че RUT240 е в съответствие със съществените изисквания и другитеприложими разпоредби на
Директива 2014/53/EU
[HR] Croatian Ovim TELTONIKA NETWORKS izjavljuje da je ovaj RUT240 u skladu s bitnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU
[CZ] Czech TELTONIKA NETWORKS tímto prohlašuje, že RUT240 splňuje základní požadavky a všechna příslušná ustanoveni Směrnice 2014/53/EU
[DK] Danish Undertegnede TELTONIKA NETWORKS erklærer herved, at følgende udstyr RUT240 overholder de væsentlige krav og øvrige relevante krav i direktiv
2014/53/EU
[NL] Dutch Hierbij verklaart TELTONIKA NETWORKS dat het toestel I RUT240 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 2014/53/EU
[EE] Estonian Käesolevaga kinnitab TELTONIKA NETWORKS seadme RUT240 vastavust direktiivi 2014/53/EU põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele
[FI] Finish TELTONIKA NETWORKS vakuuttaa täten että RUT240 tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen
[FR] French TELTONIKA NETWORKS déclare que cette RUT240 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU
[DE] German Hiermit erklärt TELTONIKA NETWORKS, dass dieser RUT240 den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie
2014/53/EU entspricht
[GR] Greek ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ TELTONIKA NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ RUT240 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EU
[HU]
Hungarian
A TELTONIKA NETWORKS ezzennel kijelenti, hogy a RUT240 típusú berendezés teljesíti az alapvető követelményeket és más 2014/53/EU irányelvben
meghatározott vonatkozó rendelkezéseket
[IE] Irish Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUT240 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU
[IT] Italian Con la presente, TELTONIKA NETWORKS dichiara che questo RUT240 è conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttiva
2014/53/EU
[LV] Latvian Ar šo TELTONIKA NETWORKS deklarē, ka RUT240 atbilst Direktīvas 2014/53/EU būtiskajām prasībām un citiem ar to saistītajiem noteikumiem
[LT] Lithuanian Šiuo dokumentu UAB TELTONIKA NETWORKS deklaruoja, kad šis RUT240 atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas
[MT] Maltese Hawnhekk, TELTONIKA NETWORKS tiddikjara li dan l-RUT240 huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħra tad Direttiva 2014/53/EU
[NO]
Norwegian TELTONIKA NETWORKS Erklærer herved at RUT240 er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU
[PL] Polish Niniejszym TELTONIKA NETWORKS deklaruje że RUT240 jest zgodny z zasadniczymi wymaganiami i innymi właściwymi postanowieniami Dyrektywy
2014/53/EU
[PT]
Portuguese Eu, TELTONIKA NETWORKS declaro que o RUT240 cumpre os requisitos essenciais e outras provisões relevantes da Directiva 2014/53/EU
[RO]
Romanian
Prin prezenta, TELTONIKA NETWORKS declară că aparatul RUT240 este în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale Directivei
2014/53/EU
[SK] Slovak Spoločnosť TELTONIKA NETWORKS týmto vyhlasuje, že smerovač RUT240 je v súlade so základnými požiadavkami a ďalšími príslušnými ustanoveniami
smernice 2014/53/EU
[SI] Slovenian TELTONIKA NETWORKS izjavlja, da je ta RUT240 v skladu z bistvenimi zahtevami in drugimi relevantnimi določili direktive 2014/53/EU
[ES] Spanish Por la presente, TELTONIKA NETWORKS declara que este RUT240 cumple con los requisitos esenciales y otras exigencias relevantes de la Directiva 2014/53/EU
[SE] Swedish Härmed intygar TELTONIKA NETWORKS att denna RUT240 är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 2014/53/EU
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

ISED Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-
exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
ANATEL
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados
Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br (http://www.anatel.gov.br).
NOM
La operación de este equipo está sujeta a las siguientes dos condiciones:
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.
2. Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Detailed compliance information is available at the following internet address: wiki.teltonika-networks.com/view/Certicates (https://wiki.teltonika-ne
tworks.com/view/Certicates).
This sign means that is necessary to read the User's Manual before you start using the device.
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
Hereby, TELTONIKA NETWORKS declares that this RUT240 is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://wiki.teltonika-
networks.com/view/RUT240_CE/RED.
Hereby, TELTONIKA NETWORKS declares that the radio equipment type RUT240 is in compliance with Radio Equipment Regulations 2017. The
full text of the UK declaration of conformity is available at the following internet address: https://wiki.teltonika-networks.com/view/RUT240_UKCA.
RF exposure
This device meets the ocial requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a
person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding
the applicable limits.
External antennas used with RUT240 must be installed to provide a distance of at least 20 cm from any people and must not be co-located or
operated in conjunction with any other antenna or transmitter.
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.
Maximum transmission power
GSM 33 dBm
WCDMA 24 dBm
LTE 23 dBm
WiFi 20 dBm
FCC Radiation Exposure Statement:
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation
distance of at least 20 cm from all persons.

ISED Canada Radiation Exposure Statement:
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Operating conditions
Operating temperature: -40° to +75° Celsius
Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
Out of direct sunlight
Away from the heat source, corrosive substances, salts, and ammable gases
Attention: operation outside the permissible range can considerably shorten the service life of the device.
Faulty and damaged products
Do not attempt to disassemble the device or its accessories.
Only qualied personnel must service or repair the device or its accessories.
If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked
at an authorized service center.
Electrical safety
Only use approved accessories.
Do not connect with incompatible products or accessories.
It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result
in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.
Product handling
You alone are responsible for how you use your device and any consequences related to its use.
Use of your device is subject to safety measures designed to protect users and their environment.
Always treat your device and its accessories with care and keep it in a clean and dust-free place.
Do not expose your device or its accessories to open ames, lit tobacco products, liquid, moisture, or high humidity.
Do not drop, throw or try to bend your device or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
Do not paint your device or its accessories.
Do not attempt to disassemble your device (exemptions for devices that require disassembly for SIM insertion) or its accessories: it does not
contain any user-serviceable parts. For safety reasons, the equipment should be opened only by qualied personnel.
Make sure to use ESD personal protective equipment while the equipment is serviced.
Do not use your device in an enclosed environment where heat dissipation is poor.
Prolonged use in such space may cause excessive heat and raise ambient temperature, which will lead to the automatic shutdown of your
device or the disconnection of the mobile network connection for your safety. To use your device again after such a shutdown, cool it in a well-
ventilated place before turning it on.
Please check all national laws and local regulations for the disposal of electronic products.
Do not operate the device where ventilation is restricted.
Do not use or install this product near water to avoid re or shock hazards.
Avoid exposing the equipment to rain or damp areas.
Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them.
Ensure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an
inappropriate power source.
During a thunderstorm, no operations should be carried out on the device and cables.
The unit must be powered o where blasting is in progress and explosive atmospheres are present or near medical life support equipment.
Do not leave your device and its accessories within reach of small children or allow them to play with it. They could hurt themselves or others
and could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury choking hazard.
Like any wireless device, this device operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must
never rely solely on any wireless device for emergency communications or otherwise use the device in situations where the interruption of data
connectivity could lead to death, personal injury, property damage, data, or other loss.

The device may become warm during regular use.
Front view
Back view
Connectors
POWER SOCKET PINOUT
Video Quick Start Guide
Need some help setting up your new Teltonika Networks RUT240 industrial cellular router? Watch our quick start guide video and follow the step by
step instructions to easily set up your new router for operation.
Video Quick Start Guide
Need some help setting up your new Teltonika Networks TRB500 Industrial 5G Gateway? Watch our quick start guide video and follow the step-by-
step instructions to easily set up your new gateway for operation.

RUT240 Industrial Cellular Router Quick Start Guide | TeltonRUT240 Industrial Cellular Router Quick Start Guide | Telton……
Hardware installation

Congure your computer (Windows)
1. Ensure the Wireless network connection is Enabled.
Go to Start — Control Panel — Network and Internet —
Network and Sharing Center. Click on the Change
adapter settings in the left panel, then right-click on
Wireless Network Adapter, and select Enable.
2. Check if IP and DNS are obtained automatically. Right-
click on Wireless Network Adapter and select Properties.
Then select Internet Protocol Version 4 and click
Properties.
3. If not selected, check to obtain an IP address and
obtain DNS server address automatically. Click OK.

4. Connect to a wireless network by right-clicking on
Wireless Network Adapter and selecting Connect.
5. Choose the wireless network RUT240 **** from the
list and click Connect. Enter the WiFi password located
on the device's label.
Login to device
1. To enter the router's Web interface (WebUI), type
http://192.168.1.1 into the URL eld of your Internet
browser.
2. When prompted for authentication enter the
username admin and enter the password located on the
device information label/engraving.

3. After logging in, you must set a new password for
security reasons. You will not be able to interact with
the router’s WebUI until the default password is
changed. The new password must consist of a minimum
of 8 characters. Requirements: one uppercase letter,
one lowercase letter, and one digit.
4. Next, the Conguration Wizard will start to help you
set up some of the router's main operational
parameters.
5. Finally, let's verify the Mobile signal strength. Go to
the Status — Network page and pay attention to the
Signal Strength indication.
To achieve the best signal conditions and maximize
cellular performance, try adjusting the antennas or
changing the location of your device. You can nd
information on signal strength recommendations here.
SIM card recommendations
Before installing the SIM cards, please apply a thin layer of dielectric grease to the SIM card contacts for devices used in environments with
high-vibration levels. This will help avoid SIM cards losing touch with the SIM slot and prevent unexpected failures.
Industrial Grade SIM cards are recommended for devices requiring a long lifespan used in environments with extreme temperatures, corrosive
or extra humid climates, or hard-to-reach locations.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=QSG_RUT240&oldid=101640"
This page was last edited on 12 January 2023, at 10:20.
Products
Modems
Gateways
Routers
Switches
IoT platforms
Accessories
Custom Product
Industries
Industrial & Automation
Energy & Utilities
Smart City

Transportation
Enterprise
Retail
All Use Cases
Support
Wiki Knowledge Base
Crowd Support Forum
Report a Vulnerability
Warranty & Repair
GPL Code Center
EOL Policy
Resources
Webinars
Video Archive
Articles Archive
Newsletter
About us
News
COVID-19 Response
Who We Are
Networks IoT academy
Policies & Certicates
Career
Contacts
Privacy
All Policies
Sitemap
Copyright © 2023, Teltonika
Newsletter
Email Address
Subscribe
Connect
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy
with it.OkRead more