TELUS Optik TV User manual

TELUS Optik TV®
Self-Install Guide

Table of Contents
Before you get started ............................................................................................Page 1
Step 1: Setting up your wireless digital box.............................................................Page 2
Step 2: Pairing with your wireless access point.......................................................Page 3
Step 3: Pairing the remote control ..........................................................................Page 4
What you'll find in your kit:
Additional support:
1x Optik TV remote 2x AAA batteries 1x HDMI cable
1x Power supply 1x Wireless digital box
If you need help during installation, TELUS technical
support representatives are available 24/7.
Please call 310-MYTV (6988) for assistance or
visit telus.com/selfinstall for additional information.
OK
We are continually listening to our customers to make your experience better every day.
Amazing service, it’s what sets us apart.

Before you get started
Conrm your TV has an available HDMI input:
Your kit includes an HDMI cable to connect
your wireless digital box to your TV. If your TV
doesn't have an HDMI input, you can use
component audio and visual cables instead.
Visit telus.com/selfinstall for details.
Conrm whether you have a wireless access point:
You will already have a wireless access point installed
in your home. This is the device you will pair with the
wireless digital box.
1
Back of TV
Pb Y L R
VIDEOHDMI IN AUDIO
1 2 Pr
HDMI inputs Component inputs
(only use if HDMI not available)
Wireless access point
Note:
Model
may vary

Step 1: Setting up your wireless digital box
Using your TV manufacturer's remote,
turn on your TV and use the input/source
button to select the input used for the
wireless digital box.
Select HDMI input
Using the HDMI cable included in your
kit, connect the wireless digital box to
any available HDMI input on your TV.
1b
1a
1c
Connect the power supply for the wireless digital box.
2
© 2020 TELUS. 03/20 2371535
OK
Pb YAUDIO
OUT
VIDEO
OUT
HDMI OPTICAL POWER
Pr
NETWORK
Pb Y L R
VIDEOHDMI IN AUDIO
1 2 Pr

Step 2: Pairing with your wireless access point
Follow the instructions on
screen, press and hold the
button on the front of your
wireless access point for
10 seconds and let go.
The lights on the device will
flash indicating that pairing
is in progress.
When the screen on the right
appears, press the OK button
on your Optik TV remote.
Press and hold
for 10 seconds
3
A screen will appear indicating that pairing
was successful (it may take a few minutes).
You are now ready to watch TV.
For additional support and troubleshooting,
visit telus.com/selfinstall.
2b
2a
2c
OK
Wireless
access point

4
Please visit telus.com/programremote to pair the promoted
remote with your TV.
3
Step 3: Pairing the remote control