TELUS Optik TV User manual

TELUS Optik TV®
Self-Install Guide

Table of Contents
Before you get started ............................................................................................Page 1
Step 1: Setting up your 4K wireless digital box .......................................................Page 2
Step 2: Pairing with your wireless access point.......................................................Page 3
Step 3: Pairing the remote control ..........................................................................Page 4
Power supply 4K wireless digital box
What you'll find in your kit:
Optik TV remote AAA batteries HDMI cable
Additional support:
If you need help during installation, TELUS technical support representatives
are available 24/7.
Please call 310-MYTV (6988) for assistance or visit telus.com/selfinstall
for additional information.
Optik TV in 4K:
Please visit telus.com/4Krequirements for the minimum requirements to watch
4K television content. Your 4K wireless digital box will function normally for HD
and SD content.

Before you get started
Conrm your TV has an HDMI input and a remote:
Your kit includes an HDMI cable to connect your
wireless digital box to the back of your TV. You will
need the original TV manufacturer's remote to select
the HDMI input you use.
Conrm whether you have a wireless access point:
You will already have a wireless access point installed
in your home. This is the device you will pair with the
wireless digital box.
Back of TV
HDMI IN
1 2
HDMI inputs
Wireless access point
Note:
Model
may vary
1

HDMI OUTOPTICAL USBPOWER NETWORK
Step 1: Setting up your 4K wireless digital box
Using your TV manufacturer's remote,
turn on your TV and use the input/source
button to select the input used in
the previous step. It may take a few
minutes for the first set-up screen
to appear while the box is initializing.
Select HDMI input
Using the HDMI cable included in your
kit, connect the wireless digital box to
any available HDMI input on your TV.
1b
1a
1c
Connect the power supply for the wireless
digital box to an outlet. The green power
light will appear on the front.
HDMI IN
1 2
HDMI OUTOPTICAL USBPOWER NETWORK
2
© 2020 TELUS. 03/20 2375290

OK
Step 2: Pairing with your wireless access point
When the screen on the right
appears, press the OK button
on your Optik TV remote.
2b
2a
2c
Follow the instructions on
screen, press and hold the
button on the front of your
wireless access point for
10 seconds and let go.
The lights on the device will
flash indicating that pairing
is in progress.
Press and hold
for 10 seconds
Wireless
access point
A screen will appear indicating that pairing
was successful (it may take a few minutes).
You are now ready to watch TV.
For additional support and troubleshooting,
visit telus.com/selfinstall.
Step 2: Pairing with your wireless access point
3

Step 3: Pairing the remote control
Please visit telus.com/programremote to pair the promoted
remote with your TV.
3
4