Tenda P200 User manual

P200 200Mbps PowerLine Mini Adapter

P200 200Mbps PowerLine Mini Adapter
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names mentioned herein
are the trademarks or registered trademarks of their respective holders.
Copyright of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. Without prior
expressed written permission from Shenzhen Tenda Technology Co., Ltd,
any individual or party is not allowed to copy, plagiarize, reproduce, or
translate it into other languages.
All photos and product specifications mentioned in this manual are for
references only. Upgrades of software and hardware may occur; Tenda
reserves the right to revise this publication and to make changes in the
content hereof without obligation to notify any person or organization of
such revisions or changes. If you would like to know more about our product
information, please visit our website at www.tendacn.com or www.tenda.cn

P200 200Mbps PowerLine Mini Adapter
Table of Contents
CHAPTER 1 PRODUCT OVERVIEW................................1
1.1 PACKAGE CONTENTS ......................................................................1
1.2 LED OVERVIEW .............................................................................2
1.3 INTERFACE /BUTTON OVERVIEW ....................................................3
1.4 FEATURES.......................................................................................3
1.5 SAFETY CONSIDERATIONS ..............................................................4
CHAPTER 2 HARDWARE INSTALLATION......................6
2.1 HARDWARE INSTALLATION.............................................................6
2.2 INSTALLATION INSTRUCTIONS ........................................................7
2.3 VERIFY PHYSICAL CONNECTION.....................................................9
CHAPTER 3 UI INSTALLATION .....................................10
CHAPTER 4 CONFIGURATION......................................15
4.1 INTERFACE OVERVIEW..................................................................15
4.2 ADAPTER......................................................................................17
4.3 QOS .......................................................................................19
4.3.1 QoS---Quick Setup .................................................................. 19
4.3.2 QoS---Advanced ...................................................................... 20
4.4 TOOLS .......................................................................................26
4.5 HELP .......................................................................................31
CHAPTER 5 USING THE PAIR BUTTON.......................32

P200 200Mbps PowerLine Mini Adapter
APPENDIX 1 FAQS.........................................................35
APPENDIX 2 TECHNICAL SPECIFICATIONS ...............37
APPENDIX 3 EMC STATEMENT ....................................38

P200 200Mbps PowerLine Mini Adapter
1
Chapter 1 Product Overview
To build a network at home or office with minimum effort and cost, the
Tenda 200Mbps Powerline Mini Adapter P200 is your choice. In many cases,
Ethernet is just not available in places where network connectivity is needed.
However, almost every room at home or office has power circuitry, which
can be used to extend network connections from your broadband router Just
simply plug one P200 that links to a broadband modem/router into the
power outlet in one room, and plug another P200 linking to a PC or any
Ethernet device in the other, you can then easily and instantly connect to the
network of up to 200Mbps transmission rate. Also, it delivers data to a
distance up to 300 meters away.
P200 provides Quality of Service (QoS) guaranteeing high reliability and
tight control of latency allowing you to quickly assign higher priority to
Internet surfing/IPTV/audio/video/VOIP/online game services or specified
IP/MAC addresses.
The device supports 128-bit AES encryption to secure your data
transmission with simple operation. Plus, the "Pair/Reset" hardware button
allows you to quickly create a private Powerline network with multiple
adapters involved.
1.1 Package Contents
P200 200Mbps Powerline Mini Adapter
CD-ROM (User Guide and Utility included)
Quick Installation Guide
Ethernet Cable

P200 200Mbps PowerLine Mini Adapter
2
1.2 LED Overview
Figure1-1 Front Panel Overview
LED
Color
Status
Description
Power
Green
Off
The device is NOT receiving
electrical power
Solid
The device is receiving electrical
power
Fast Blink
Connecting to other Powerline
devices.
Slow
Blink
The device blinks every 7~8
seconds under power saving
mode.
PLC
Green
Off
The device is NOT connected to a
Powerline network.
Solid
The device is connected to a
Powerline network but is not
transmitting data.
Blink
The device is transmitting data.
LAN
Green
Off
Cable NOT connected
Solid
Cable connected

P200 200Mbps PowerLine Mini Adapter
3
1.3 Interface /Button Overview
Figure2-2 Interface /Button Overview
Interface
/Button
Description
LAN
RJ45 port: Connect it to a PC or other network
devices using an Ethernet cable.
Reset/Pair/Power
Save
System Restore/Pair/Power Save: Pressing the button
twice consecutively within 2 seconds switches the
device to power save mode. Pressing the button once
while in power save mode wakes up the device. Press
for 2-3 seconds to pair with other adapters; press for
9-11 seconds to disconnect from the existing
network; while pressing for over 15 seconds, system
will be restored to factory default settings.
1.4 Features
Compliant with HomePlugAV IEEE802.3 and IEEE802.3u standards
Plug and Play; delivers data and power through existing electric wires
Powerline transmission distance up to 300 meters
Up to 200Mbps Powerline transmission rate
QoS prioritizes specified services or applications
Default network name: HomePlugAV
Compatible with all other manufacturers’ HomePlugAV-compliant
devices

P200 200Mbps PowerLine Mini Adapter
4
Management utility allows you to manage all Tenda Powerline adapters
on the network.
1 x 10/100Mbps Auto-MDIX Fast Ethernet port
1 x Pair/Reset button to quickly establish a secured private Powerline
network
Power Saving mode reduces electrical consumption down to 0.5W
Advanced 128-bit AES encryption to ensure total network security
1.5 Safety Considerations
Observe the following to avoid any potential harm caused from improper
use.
DO NOT expose the device to flammable , conductive or humid objects;
Make sure there is no worn-out electric wire and other appliances are
stably placed.
Operate it in a well-ventilated environment.
DO NOT expose the device to sun shine or other heat sources;
DO NOT expose the device to corrosive substances (such as acid and
alkali, etc)
Connect the device to a wall outlet that matches rated power
requirements.
Input voltage fluctuation should be less than 10%. For optimal result,
connect the device to a regular wall outlet without any other devices
like hair drier, electric iron, fridge or charger connected to the same
outlet.
Read the Quick Installation Guide before using the device.
Note all safety instructions stated in both user guide and quick
installation guide.
Use of accessories that are not included to this product may cause fire or
damage.
DO NOT place any objects on the device.
DO NOT expose the device to water. Keep it clean.

P200 200Mbps PowerLine Mini Adapter
5
It is advisable to disconnect the device from power outlet and any
other connections in lightning and storm weather though it is
lightning-proof;
Clean the device with a piece of soft and dry cloth instead of using
liquid or aerosol cleaner. Do unplug it from wall outlet before cleaning.
DO disconnect the device from power supply when not in use.
Keep ventilator clean and unblocked. Substances or objects that fall
into it may cause short circuit, worse even, cause fire or damage the
device. DO NOT spray any liquid onto the device surface.
DO NOT open the device’s shell/outer case whether working or not；
Be careful when unplugging the device from wall outlet. It may be hot.
Contact Tenda technical staff if you are running into problems that you
are not able to solve.

P200 200Mbps PowerLine Mini Adapter
6
Chapter 2 Hardware Installation
2.1 Hardware Installation
Method 1:
As seen below: Establishing network for rooms under a single electricity
meter using the Tenda P200 devices requires no extra cable deployment.
Simply plug two P200 devices into the wall outlets in such rooms
respectively and connect 2 PCs to the 2 P200 devices respectively.
Figure 1-3 Establish Powerline Network
Method 2:
As seen below: Rooms A-B are under a single electricity meter. Connect the
first P200 to an ADSL Modem Router in room A using an Ethernet cable, plug
the second P200, connected to a PC, into the wall outlet in room B.