Tenma 72-14515 User manual

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <1> V1.004/03/19
Borescope User Manual
Part Number: 72-14515

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <2> V1.004/03/19
Installation
This model Includes
1. Main device
2. Camera probe
3. 4 AA batteries
Step 1:
Connect the device with the camera probe, and tightly screw the plug into the bolt
Step 2:
Assemble the batteries according to the polarity indications.
Functional keys
Operations
1. Long press the power key to turn on the device; if the camera probe is correctly connected, an image will display.
2. Press the saturation adjustment key to get desirable image quality.
3. Press the LED brightness adjustment key to get desirable brightness.
4. Press the ip image key to ip an image when necessary.
5. The camera probe can be applied in different places and shapes.
Instructions
Power on/off
1. Long press the key for 2s to power on;
2. Image displays 1s after the TENMA;

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <3> V1.004/03/19
3. Red power icon ashes when the battery is low, and the device is automatically turned off after several 5 seconds
4. The device can detect if the camera probe is connected in real time; ‘connect to cable’ displays when disconnecting;
5. Press the power key to turn off the device.
Image saturation (see the gure below)
1. Image saturation can be adjusted from level 1 to level 6, and the setting can be automatically saved.
2. Short press the key to adjust once; long press it to adjust cyclically.
The similar display of icons and levels when adjusting saturation
Lens LED brightness
1. The lens LED brightness can be adjusted from level 1 to level 4. When LED display is off, the level is 0 and the progress
bar is not lled. The relative setting can be automatically saved; short press the key to adjust once; long press it to adjust
cyclically; the similar display of icons and levels when adjusting LED brightness is as bellows.
Image ips
1. Press the key to ip an image once;
2. Icons keep displaying on the upper left of an image;
3. Images ip from left to right, then from up to down.
Power display
1. When battery is low, the battery box turns red . When battery is almost dead, the battery box turns red and ashes every
1 second. The device will be automatically turned off after about 50 seconds.
(see the gure below).
Notes
• Do not apply the device in medical sector or for body check.
• Put the device in places that cannot be easily reached by kids.
• Do not use the device when you are not familiar with it. Device maintenance: factors like camera probe connection and
binding, parts damage etc. can inuence the device’s function.
• Do not use the device when it fumes or gives off gas. Use it again after repair.
• Use the device, its accessories and other tools according to the manual and the working condition.
• Remove batteries before cleaning with dry cloth; keep the camera lens clean.
• Only use AA batteries for replacement, and pay attention to its Battery maintenance.

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <4> V1.004/03/19
• Keep batteries in storage away from other metal parts, such as paper clips, coins, keys, nails, screws, or other small metal
parts that can connect the ends.
• Do not touch battery uid when it seeps out. Rinse it with clean water after coming in contact with body. If it accidentally
splashes to eyes, go to the hospital for help.
• Please handle camera probe with care, it is sensitive equipment.
• Contact dealers or shops for device repair. Use the same parts for replacement.
• Do not disassemble the device or make new power systems.
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Tenma is the registered trademark of the Group. © Premier Farnell Limited 2016.