Tennant i-charge 2 User manual

i-charge2
Battery charger
User manual
Model Part No.
1264543
Tennant Company
10400 Clean Street, Eden Prairie,
MN 55344-2650
Telephone: [phone]
Internet: www.tennantco.com
To view, print, download the parts
manual visit:
www.tennantco.com/manuals
Revision: 00 (10/2022)

2
Original user manual, written in the English Language
Tennant Company
10400 Clean Street, Eden Prairie, MN 55344-2650
Telephone: [phone]
Internet: www.tennantco.com
Date:26/10/2022
Model: i-charge 2
Product code: 1264543
Version: v.1.0

3
Preface
Thank you for purchasing the i-charge® 2. The i-charge 2 is made to charge i-power batteries
in a short amount of time. The quick exchange i-power battery system makes our battery
powered machines a real cleaning workforce.
The i-charge 2 is easy to use when you follow the instructions. Please read the user manual
carefully. Become familiar with the correct operation and maintenance procedures. Store the
manual in a safe place. The manual is an essential part of the i-charge 2 and must be handed
over to the new owner upon resale or exchange. Each i-charge 2 has a unique identification
number that can be found on the bottom.
Purpose of the user manual
The purpose of the user manual is to provide the user with information during the life of the
i-charge 2 in such a way that the i-charge 2 is used correctly, efficiently and safely, even in
the event of reasonably foreseeable misuse.
The user manual contains instructions regarding:
•personal operator safety;
•intended and non-intended use of the i-charge 2;
•instructions for daily use;
•maintenance instructions;
•storage conditions;
•disposal of the i-charge 2.
These instructions must be considered to avoid risks that could lead to physical and/or
material damage.
Target audience
This user manual is intended for operators of the i-charge 2 and their supervisors, as well as
partners and importers.
Operators of the i-charge 2
The i-charge 2 may only be operated by a person who:
•has correctly read and understood the instructions in this manual;
•is trained by an experienced operator who has read and understood the instructions in
this manual.

4
Reading guide
The following symbols and terms are used throughout this manual to alert the reader to
safety issues and important information:
Symbol
Term
Explanation
WARNING
Indicates a hazardous situation which, if the safety
instructions are not followed, can lead to injuries of
the operator or bystanders, light and/or moderate
damage to the product or the environment.
CAUTION
Indicates a hazardous situation which, if the safety
instructions are not followed, can lead to light and /
or moderate damage to the product or the
environment.
ATTENTION
Indicates a liability situation, where the
manufacturer or its partners and affiliates cannot be
held accountable for damages caused by non-
compliance.
BATTERIES
Indicates a battery-operated machine, batteries
must be charged according to the instructions in
this user manual. Batteries must be disposed of
according to your local laws and regulations.

5
Content
Preface ..............................................................................................................................................................................................3
Purpose of the user manual......................................................................................................................................................3
Target audience.............................................................................................................................................................................3
Operators of the i-charge 2 ......................................................................................................................................................3
Reading guide ................................................................................................................................................................................ 4
1Introduction ...........................................................................................................................................................................7
1.1 Intended use of the product ................................................................................................................................. 7
1.2 Non-intended use of the product.......................................................................................................................7
1.3 Modifications .............................................................................................................................................................. 7
1.4 Specifications ............................................................................................................................................................. 8
1.5 Warranty...................................................................................................................................................................... 9
1.6 Identification ...............................................................................................................................................................9
2Description ......................................................................................................................................................................... 10
2.1 Battery charge displays ...................................................................................................................................... 11
3Safety.................................................................................................................................................................................... 12
3.1 General Safety Instructions ............................................................................................................................... 12
3.1.1 Batteries............................................................................................................................................................... 12
3.2 Risks during operation......................................................................................................................................... 13
4Transport and storage ................................................................................................................................................... 14
5Assembly and installation............................................................................................................................................ 15
5.1 Unboxing................................................................................................................................................................... 15
5.2 Assembly.................................................................................................................................................................. 16
6Operation ............................................................................................................................................................................ 17
6.1 Before you start...................................................................................................................................................... 17
6.2 Operation.................................................................................................................................................................. 17
6.2.1 After operation .................................................................................................................................................. 18
6.3 Cleaning and storage........................................................................................................................................... 18
6.3.1 Cleaning ............................................................................................................................................................... 18
6.3.2 Storage ................................................................................................................................................................. 18
7Maintenance ...................................................................................................................................................................... 19
8Trouble shooting.............................................................................................................................................................. 20

6
9Decommissioning and disposal ................................................................................................................................. 21

7
1Introduction
The i-charge® 2 is easy and safe to use. You will be surprised how fast and effective the i-
charge 2 is. This manual helps you get started and explains the operation and maintenance
procedure.
This manual is intended for those who work with the i-charge 2 and perform daily
maintenance. The manual must be read in full before the first actions. This manual describes
the correct method of use, safety measures, maintenance and transport.
The manufacturer continuously improves all their products based on user experience and
feedback. Any deviations between the texts and/or images from the manual and your i-
charge 2 can therefore arise from the difference in model or from possible changes due to
continuous development and innovation.
1.1 Intended use of the product
The i-charge 2 should be used indoors in a dry and well ventilated open environment.
ONLY use original Lithium - Ion batteries provided by the manufacturer.
1.2 Non-intended use of the product
WARNING
Non-intended use can have consequences for the safety of operators and
bystanders and will void the warranty on the product.
The i-charge 2 is not intended for use outdoors or in a wet or closed environment.
Do not charge non original batteries or non-rechargeable batteries with the i-charge 2.
Alternative products will void the manufacturer’s warranty, more importantly they may also
cause serious harm to the operator. Non-original batteries, for instance, can burst open.
1.3 Modifications
It is not permitted to make modifications to the design of the i-charge 2 without consultation
and permission from the manufacturer. This affects the warranty, see section 1.5.

8
1.4 Specifications
Figure 1
Product size:
265 x 214 x 110 mm | 10.4”x 8.4 “x 4.3”
Weight:
1.2 kg | 2.6 lbs
Battery capacity:
2 batteries/63 Hz
Power supply:
100-240 V, 50/60 Hz per side
Fuse
6.3 A / 300ms
Charge current:
2.5 A per side
Standby power:
2 W
Average charging time:
i-power 9: 4 hours ; i-power 14: 6 hours
Operation temperature and humidity:
10 C - 50 C : 20% - 90% RH, no condensing
Storage temperature and humidity:
10 C - 85 C : 10% - 95% RH, no condensing
Output voltage:
DC 29.4 V per side

9
1.5 Warranty
The i-charge® 2 should only be operated with the materials supplied. Using alternative
supplies may cause damage to the i-charge 2 and may cause a risk to the operator. The use
of alternative supplies voids manufacturer's warranty.
1.6 Identification
Each i-charge 2 has a unique serial number that can be found on the bottom of the body. Your
i-team partner needs this number when you order parts.
Explanation type plate:
Figure 2

10
2Description
The compact i-charge® 2 is designed to charge 2 batteries in parallel.
The i-charge 2 consists of:
Figure 3
Legend
1.
The battery charge displays.
2.
The power cable.
3.
The main body.
4.
The ON/OFF switch.