TESI XE18PB06 Specification sheet

Via Piave, 20/11
20080 Vermezzo - Milano - ITALY
Tel. 003902 - 9440501 - Fax 003902 - 9449087
http://www.tesigroup.com
e-mail: [email protected]

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 1
This publication consists of 64 pages, which are so subdivided:
No. OF PAGES REVISION BASE
CHAPTER 1
From 1-1 to 1-11 00 February 2009
CHAPTER 2
From 2-1 to 2-3 00 February 2009
CHAPTER 3
From 3-1 to 3-5 00 February 2009
CHAPTER 4
From 4-1 to 4-6 00 February 2009
CHAPTER 5
From 5-1 to 5-3 00 February 2009
CHAPTER 6
From 6-1 to 6-3 00 February 2009
CHAPTER 7
From 7-1 to 7-6 00 February 2009
CHAPTER 8
From 8-1 to 8-1 00 February 2009
CHAPTER 9
From 9-1 to 9-1 00 February 2009

2 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 3
INDEX REVISIONS
REVISION
DESCRIPTION
01
02
03
04
05
06
07

4 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 5
Page
1. INTRODUCTION .....................................................................................................................................9
1.1. DEVICE IDENTIFICATION DATA.............................................................................................10
1.2. IDENTIFICATION OF THIS PUBLICATION............................................................................10
1.3. JOINED PUBBLICATIONS.......................................................................................................11
1.4. PURPOSE OF THIS PUBLICATION ........................................................................................11
1.5. USE OF THIS MANUAL............................................................................................................11
1.6. REVISION.................................................................................................................................12
1.7. CONVENTIONS FOR DEFINING THE ORIENTATION...........................................................12
1.8. GLOSSARY AND ABBREVIATIONS........................................................................................13
1.8.1. GLOSSARY...............................................................................................................................13
1.8.2. ABBREVIATIONS .....................................................................................................................13
1.9. SAFETY WARNINGS ...............................................................................................................14
1.9.1. GENERAL WARNINGS............................................................................................................14
1.9.2. PERSONNEL QUALIFICATION ...............................................................................................14
1.9.3. PERSONAL SAFETY MEANS..................................................................................................15
1.9.4. SAFETY STICKERS .................................................................................................................15
1.10. PERSONNEL TRAINING..........................................................................................................15
1.11. CUSTOMER SERVICE.............................................................................................................16
1.11.1. AFTER-SALES TECHNICAL SERVICE ...................................................................................17
1.11.2. SPARE PARTS.........................................................................................................................17
2. GENERAL TECHNICAL INFORMATION.............................................................................................19
2.1FOREWORD.............................................................................................................................20
2.1.1. USE DESTINATION..................................................................................................................20
2.1.2. OPERATOR..............................................................................................................................20
2.1.3. WORK ENVIRONMENT ...........................................................................................................20
2.1.4. ENVIRONMENTAL REQUIREMENTS.....................................................................................20
2.1.5. NOISE EMISSION ....................................................................................................................20
2.2 GENERAL DESCRIPTION .......................................................................................................21
2.2.1. PORTABLE HIGH ENERGY IGNITIER....................................................................................22
2.2.1.1.DISCHARGE CIRCUIT .............................................................................................................23
2.2.1.2.RECHARGEABLE BATTERY...................................................................................................23
2.2.1.3.BATTERY CHARGER...............................................................................................................23
2.2.1.4.CAPACITOR .............................................................................................................................23
2.2.2 IGNITOR CONNECTION CABLE.............................................................................................23
2.2.3 IGNITION LANCE .....................................................................................................................24
2.2.4. CHARGE CABLE......................................................................................................................24
2.3. PORTABLE HIGH-ENERGY IGNITER XE18PB06 TECHNICAL DATA..................................25
2.3.1 DIMENSIONS AND WEIGHT ...................................................................................................25
2.3.2 ELECTRICAL CHARACTERISTICS........................................................................................25
2.3.3 PACKINGS’ DIMENSIONS AND WEIGHT...............................................................................25

6 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
3. SAFETY RULES................................................................................................................................... 27
3.1 SAFETY GENERAL PRINCIPLES...........................................................................................28
3.2 SAFETY INFORMATION .........................................................................................................29
3.3 EMERGENCY BEHAVIOURS.................................................................................................. 30
3.3.1. FIRE.......................................................................................................................................... 30
3.3.2. BURNS..................................................................................................................................... 30
3.3.3. CORROSION............................................................................................................................ 31
3.3.4. ELECTRIC SHOCK..................................................................................................................31
3.3.5. WOUNDS AND FRACTURES.............................................................................................. 31
3.3.6. ELASTOMERIC MATERIAL................................................................................................. 31
3.3.6.1. FIRST AID............................................................................................................................. 32
3.4 SAFETY IN MAINTENANCE...................................................................................................32
3.5 SAFETY DEVICE ..................................................................................................................... 34
3.5.1 LIFTING ACCESORIES........................................................................................................... 34
3.5.2 ELECTRICAL SYSTEM............................................................................................................ 34
4. PACKING, RECEPTION, STORAGE AND DISMANTLING............................................................... 35
4.1 GENERAL WARNINGS............................................................................................................ 36
4.2 PRELIMINARY OPERATIONS................................................................................................. 36
4.3 PACKING.................................................................................................................................. 36
4.4 RECEIVING CONTROL........................................................................................................... 36
4.5 STORAGE................................................................................................................................37
4.5.1. GENERAL.............................................................................................................................37
4.5.2. ENVIRONMENTAL REQUIREMENTS................................................................................. 37
4.5.3. RUN FROM OPERATIONS BEFORE POWER STORAGE DEVICE.................................. 37
4.6 DISMANTLING.........................................................................................................................37
5. INSTALLATION.................................................................................................................................... 39
5.1 GENERAL................................................................................................................................. 40
5.2 REMOVAL OF PROTECTIVE PACKING AND GETTINGS STARTED................................... 40
5.3 INSTALLATION OF IGNITION DEVICE ..................................................................................40
5.3.1. CONNECTING THE BATTERY............................................................................................ 40
5.3.2. ELECTRICAL CONNECTION BETWEEN POWER AND IGNITOR.................................... 41
6. USE....................................................................................................................................................... 43
6.1 GENERAL................................................................................................................................. 44
6.2 COMMAND AND CONTROL ...................................................................................................44
6.2.1. GENERAL.............................................................................................................................44
6.2.2. CONTROL PANEL................................................................................................................ 44
6.3 USE ..........................................................................................................................................45
6.3.1. POSITIONING OF IGNITION IN THE BURNER.................................................................. 45
6.3.2. UNIT IGNITION STARTING .................................................................................................45
6.3.3. CHECKS DURING OPERATION .........................................................................................46
7. MAINTENANCE.................................................................................................................................... 47
7.1 GENERAL................................................................................................................................. 48
7.2 INTRODUCTION......................................................................................................................48
7.3 CUSTOMER SERVICE ............................................................................................................ 48
7.4 AUTHORIZED PERSONNEL................................................................................................... 48
7.5 MAINTENANCE .......................................................................................................................49
7.5.1. CONTROL CONNECTOR ON THE DEVICE...................................................................... 49
7.5.2.CHECKING THE CONDITION OF THE CABLES SUPPLIED.............................................49
7.5.3. CHECKING THE BATTERY CHARGE.................................................................................50
7.5.4. STATE CONTROL OF THE TIP SURFACE......................................................................... 50
7.6 CORRECTIVE MAINTENANCE............................................................................................... 51
7.6.1. REPLACING THE ELECTRONIC BOARD...........................................................................52
7.6.2. REPLACING THE BATTERY ...............................................................................................53
7.6.3. REPLACING THE CAPACITOR........................................................................................... 54

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 7
7.6.4. REPLACING OF THE SPARK GAP......................................................................................55
8. DIAGNOSTICS......................................................................................................................................57
8.1 GENERAL.................................................................................................................................58
8.1.1. RISK OF MALFUNCTION.....................................................................................................58
9. OPTIONAL ACCESSORIES.................................................................................................................61
9.1 GENERAL.................................................................................................................................62

8 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 9
1. INTRODUCTION
We jointly want to thank you for having preferred TESI s.r.l. and to congratulate you on the choice you made;
by purchasing your new portable high-energy igniter you provided yourself with a product characterized by
excellent performances, high efficiency and reliability.

10 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
1.1. DEVICE IDENTIFICATION DATA
Here following, the portable high-energy igniter XE18PB06 TESI s.r.l. identification plates which this manual
refers to, are reported:
a. Identification plate applied on the portable high-energy igniter XE18PB06
1.2. IDENTIFICATION OF THIS PUBLICATION
The "USE AND MAINTENANCE INSTRUCTIONS" manual is an official document issued by TESI s.r.l. and
represents an integral part of the portable high-energy igniter XE18PB06. It is countermarked by a publication
number (No.), reported on the third coversheet, allowing an easy identification, traceability of the manual itself,
as well as any later reference to it.
All the information contained in this manual were updated to its publication date. TESI s.r.l. have the right to
modify without giving any previous notice the contents of this manual and decline any responsibility for the
possible errors and/or omissions present inside it.

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 11
1.3. JOINED PUBBLICATIONS
-Portable High energy Igniters wiring diagram
1.4. PURPOSE OF THIS PUBLICATION
This manual, meant for the users of the portable high-energy igniter XE18PB06, contains all the information
required for its handling, its installation, its operation and its maintenance. It moreover supplies the information
for the personnel training, facilitates the procedure for ordering spare parts and gives indications about the
safety devices and the possible residual risks.
On a careful and rational observance of the rules contained in this manual will depend both the correct
operation and the useful lifespan of the high-energy igniter XE18PB06, as well as the safeguard and
protection of the operator’s safety.
It is strongly recommended to carefully read and to strictly observe the directives contained in this publication,
which are organized, as far as possible, according with a chronological scheme of use of the portable high-
energy igniter XE18PB06.
This manual represents a useful support for the user and a valid mean for reminding him of all the primary
operations to be carried out; anyway, some minimum specific technical knowledge is required for using the
Portable High-Energy Igniter XE18PB06 on fully safe conditions.
1.5. USE OF THIS MANUAL
NOTE
This manual must be carefully preserved for the whole lifespan of the Portable High-
Energy Igniters XE18PB06.
Should the High-Energy Igniters XE18PB06 be sold, the manual shall be delivered to the
new owner together with the unit itself.
The manual is subdivided into two parts; the first part, whose pages are numbered in Arabian numerals,
consists of the Title Page, the List of the valid pages, the Additions’ and Variants’ Record and the Table of
Contents.
The Table of Contents allows to exactly locate the pages containing the topic you are interested in.
The second part, whose pages are numbered in Arabic numerals, is articulated in such a way to supply the
user with the necessary indications for operating by fully observing the safety rules in all the installation, setup,
use and maintenance phases of the portable high-energy igniter XE18PB06 .
Within the text, some "symbols" are used, in order to both highlight and visually distinguish the importance of
the different types of information.
Graphic representation of the symbols and relevant meaning:
NOTE
Indicates important complementary information.
CAUTION
The inobservance of the relevant indications can cause even irreparable damages to the
portable high-energy igniter XE18PB06

12 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
WARNING
Highlights any situation possibly dangerous for people.
PROHIBITION
Indicates the prohibition of carrying out actions, procedures, etc.. The inobservance of
such a prohibition can cause even irreparable damages to the portable high-energy
igniter XE18PB06, seriously damage the environment or create dangerous situations for
people.
The manual, together with the relevant enclosures and integrations, must be kept with the utmost care and be
always complete, integral and legible in every part, for being preserved jointly with the portable high-energy
igniter XE18PB06, up to the final elimination of this last one.
Should the manual be lost, a duplicate shall be immediately got by contacting TESI s.r.l. Should the safety
stickers originally applied on the portable high-energy igniter XE18PB06 be either lost, damaged, or should
they result to be even only partially incomprehensible, they shall be promptly replaced.
1.6. REVISION
Should the product be modified, TESI s.r.l. is exonerated from updating previous products or from revising
previous manuals, exception made for exceptional cases.
This can lead to some inadequacy of the old manuals, and, therefore, the user can ask for the last revision of
the manual itself or for any technical information by directly contacting TESI s.r.l..
The revisions which TESI s.r.l. will possibly transmit to the owner of the portable high-energy igniter
XE18PB06 shall be annexed to this manual.
TESI s.r.l. will be glad to accept any possible suggestions made by the user, purposed to improve the manual,
as well as your possible communication about any property change, in case of sale of the Portable High-
Energy Igniters XE18PB06 to a new owner.
1.7. CONVENTIONS FOR DEFINING THE ORIENTATION
In order to facilitate the comprehension of this manual, here following the conventions for defining the
orientation are reported.
The definitions used for identifying the displacement of portable high-energy igniter XE18PB06 components
include the following terms:
 front;
 upper;
 right:
 left.
The “front” part is that where the box cover, and its fixing devices, is located; also the stickers with the safety
warnings is located on the “front” part.
The “upper” part is that where the command button, signal lamps and lifting handle are located.
The “right” and “left” sides are referred to an operator positioned in front of the box cover (front) and looking
toward it. Particularly on the left is the connector for the charge cable and the identification plate while, on the

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 13
right, is the connector for the ignition lance cable.
1.8. GLOSSARY AND ABBREVIATIONS
In this paragraph, a list containing not common terms, or terms anyway used with a meaning different from the
common one, as well as the abbreviations and the units of measure used in this text, are supplied.
1.8.1. GLOSSARY
The 2006/42/CE Machinery Directive (Annex I, 1.1.1.) means by:
DANGEROUS AREA - an area inside and/or near the machine, in which the presence of an exposed
person represents a risk for the safety and the health of the person himself;
EXPOSED PERSON - any person situated either fully or partially in a dangerous area;
OPERATOR - a person charged with the task of installing, operating, setting, carrying out the
maintenance, cleaning, repairing and transporting the machine.
MAN-MACHINE INTERACTION - any situation in which an operator interacts with the machine, in any of the
operative phases and in any moment of the machine lifespan.
RESIDUAL DANGER - a danger which couldn’t be possibly either eliminated or sufficiently reduced in the
machine designing phase.
SAFETY COMPONENTS - the components used for protecting the operator, whose faulty or bad operation
can prejudice the safety and the health of the exposed persons (for example fixed or mobile protections,
electric devices, pneumatic devices, etc.).
1.8.2. ABBREVIATIONS
%...........................................................................................................................................................percentage
°C...................................................................................................................Celsius degree (centigrade degree)
H......................................................................................................................................................................hour
Ah ......................................................................................................................................................ampere-hour
cfr..............................................................................................................................................................compare
dB(A)..................................................................................................................... decibel (noise unit of measure)
etc. ...........................................................................................................................................................et cetera
ex. ............................................................................................................................................................example
Hz .................................................................................................................................. hertz (cycles per second)
kg..............................................................................................................................................................kilogram
kW..............................................................................................................................................................Kilowatt
M....................................................................................................................................................................meter
Max.........................................................................................................................................................Maximum
Min...........................................................................................................................................................Minimum
s..................................................................................................................................................................second
min...............................................................................................................................................................minute
mm.........................................................................................................................................................millimeters
No...............................................................................................................................................................number
Pr........................................................................................................................................... Progressive number
V .......................................................................................................................................................................volt
Vac. .......................................................................................................................................alternate current volt
J…….....……………………………………………………………………………………………………………….Joule
W .....................................................................................................................................................................watt
J/s............................................................................................................................................. Joules per second

14 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
1.9. SAFETY WARNINGS
1.9.1. GENERAL WARNINGS
WARNING
Carefully read the information reported in Chapter 3 "Safety rules" before carrying out
any operation on the High Energy Igniters
You are moreover here reminded that:
The portable high-energy igniter XE18PB06 must not be used, neither any intervention can be carried out
on it, without having previously read and fully understood this manual in every part;
It is forbidden to use the portable high-energy igniter XE18PB06 for any use, other than those indicated in
the manual, and TESI s.r.l. can’t be held as being responsible for failures, inconveniences and accidents
due to lack of knowledge of what reported in this manual;
It is forbidden to either tamper with the equipments treated in the instruction manual, to alter or to modify
them, even partially, in particular as far as the protection guards and the safety devices installed on the
High Energy Igniters and foreseen for granting people safety, are concerned;
It is forbidden either to operate in any different way from the indicated one or to neglect the operations
purposed for granting a full safety.
NOTE
It must be considered that the rules contained in this manual can’t possibly foresee some
particular situations, which could occur during the different working phases.
1.9.2. PERSONNEL QUALIFICATION
All the operations relevant to the portable high-energy igniter XE18PB06, from the maintenance up to its final
elimination, require the presence of personnel with an adequate training level, in order to reduce to the
minimum the risks due to a lack of professional specialization.
For this purpose, as far as the qualification of the personnel to be employed is concerned, reference shall be
made to the here following enlisted indications:
USER: is a person trained for using the portable high-energy igniter XE18PB06, such to grant a good
knowledge of the procedures both on usual and on emergency conditions;
MECHANICAL MAINTAINER: he must have either a mechanical or an electro-technical qualification,
perfectly know the contents of this manual and be adequately trained on the safety rules, in order to be
authorized to operate on the portable high-energy igniter XE18PB06.
ELECTRIC MAINTAINER: he must have either an electro-technical or an electro-mechanical qualification,
perfectly know the contents of this manual and be adequately trained on the safety rules, in order to be
authorized to operate on the portable high-energy igniter XE18PB06.
PROHIBITION
Don’t employ any personnel having a qualification different from the indicated one.

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 15
1.9.3. PERSONAL SAFETY MEANS
When using the portable high-energy igniter XE18PB06, the operator shall always wear the here following
enlisted personal safety gear:
safety shoes;
protective gloves;
eyes protection;
helmet;
protective ear-guards;
safety faceplate;
body protective overalls
1.9.4. SAFETY STICKERS
In order to safeguard the personnel safety, on the portable high-energy igniter XE18PB06, in the most
adequate places and according with the identified risks, some proper safety stickers were applied.
The following
Table 1.1 reports the safety stickers with their meaning and respective position on the portable high-energy
igniter XE18PB06.
Table 1.1 - Safety stickers
SYMBOL
DESCRIPTION
POSITION ON THE PORTABLE HIGH-
ENERGY IGNITER
Dangerous electric voltage
On the front cover of the device
Grounding point
NOTE
As far as the safety stickers relevant to the personal safety means are concerned,
observe those foreseen by the yard and/or by the relevant rules in force in the country
where the portable high-energy igniter XE18PB06 is used
1.10. PERSONNEL TRAINING
The training of the personnel using and carrying out the maintenance interventions on the portable high-
energy igniter XE18PB06 is quite simple and it is given by reading this manual.
As described in this manual, the operator must execute some normal checks before setting the portable high-
energy igniter XE18PB06 into operation.

16 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
When the Portable High Energy Igniters is operating, the operator must keep the whole functionality under
control and, if necessary, intervene on the devices, if some malfunctions are noticed, or, anyway, he must
know how to operate in case of an emergency.
At the end of the working day, the operator must carry out some other simple checks, purposed to verify the
correct operation of the portable high-energy igniter XE18PB06.
Besides, it is very important that the operator is in a position to intervene for carrying out the routine
maintenance interventions.
1.11. CUSTOMER SERVICE
After having tested the portable high-energy igniter XE18PB06, TESI s.r.l. issue a certificate, by which they
engage themselves to grant that the portable high-energy igniter XE18PB06 fully complies both with the
specifications and with the stated characteristics.
The warranty period is of 12 (twelve) months since delivery (the Delivery Note date will be taken for
reference), exception made for the normal wearing parts, and only foresees the cost-free replacement of
defective elements, when an anomaly due to any defects of materials, machining or assembly errors is
ascertained.
The replaced parts keep being a property of TESI s.r.l. and must be sent back to their factory within 30 days
since reception of the new material; shouldn’t the replaced parts be returned within that term, TESI s.r.l. will
provide to regularly invoice the new parts. TESI s.r.l. reserve to themselves the right of requesting that the
portable high-energy igniter XE18PB06, or a part of it, is transferred for repair to their own factory or to other
factories of their choice, keeping the relevant transport costs charged to the Customer, and without that this
last one can oppose to the machine getting transferred to the TESI s.r.l. or advance any damages’
compensation.
NOTE
The over mentioned warranty period will be valid, only provided that there aren’t any
different conditions reported on the purchase agreement of portable high-energy igniter
XE18PB06
The disassembly and reassembly expenses, as well as those relevant to the transport and packaging of the
parts to be replaced in warranty, will be charged to the Customer.
Besides, if not differently specified in the purchase agreement, the journey costs, inclusive of the travelling
hours, as well as of the logistic expenses of the TESI s.r.l. personnel carrying out the assistance intervention
on warranty terms, will be charged to the Customer.
The denunciation of the defects and the relevant request of intervention shall be made in writing by the user
directly to TESI s.r.l. within a term of 8 days from their manifestation
The warranty legally ceases when:
the customer didn’t observe the payment contract obligations;
the purchaser eliminates, deletes or modifies the digits or the data or the marks directly reported on the
portable high-energy igniter XE18PB06, i.e., on the plates or on the identification plates applied to the TESI
s.r.l. product;
the portable high-energy igniter XE18PB06 is used in a way not complying with the TESI s.r.l.’s

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 17
indications, and, therefore, in case of:
- manoeuvring errors;
- overloads;
- mounting of not original spares or modification of original part;
- inobservance of the maintenance rules.
In none of the over mentioned cases the Customer can exact either the contract cancellation or a
compensation for damages.
1.11.1. AFTER-SALES TECHNICAL SERVICE
For any kind of intervention, the TESI s.r.l. "After-Sales Technical Service" is at their Customers’ full disposal.
Both qualified personnel and specific equipments are available for overhaul and/or repair interventions.
The TESI s.r.l. "After-Sales Technical Service" is always available for supplying explanations and advices, in
order to allow you getting the best performances from your portable high-energy igniter XE18PB06.
In case of a failure on the portable high-energy igniter XE18PB06, TESI s.r.l. suggest to consult, first of all,
Chapter 8 of this manual, which is relevant to the problems’ solution, in order to identify the existing possible
interventions to be carried out by your own personnel, without having to ask for the help of the TESI s.r.l.
"After-Sales Technical Service".
After having consulted Chapter 8, it could anyway still be necessary to ask for the intervention of the TESI
s.r.l. "After-Sales Technical Service" technicians.
The intervention request shall be formulated to TESI s.r.l. by using either the references here following
reported, or those present on the identification plate fastened to the portable high-energy igniter XE18PB06:
TESI s.r.l.
Via Piave, 20/11
20080 Vermezzo, Milano, Italy
Phone...........................................................................................................................................+39 02 9440501
Fax................................................................................................................................................+39 02 9449087
Internet web site ................................................................................................................ www.tesigroup.com
E-Mail:
General Information ..........................................................................................................[email protected]
Customer assistance ..................................................................................................t[email protected]
Sales ............................................................................................................................. [e-mail]
The intervention request procedure must be the following one:
1 Contact TESI s.r.l. either by phone or through E-Mail, specifying the portable high-energy igniter
XE18PB06 data present on the identification plate and then, with the help of a technician, check the
possibility of solving the problem directly on the phone.
2 If a solution can’t be found by phone or through an E-Mail, send a fax or an E-Mail in order to request an
intervention, specifying all the data both relevant to the portable high-energy igniter XE18PB06 and to the
owner and place where the generator itself is installed.
3 Wait for a call from the "After-Sales Technical Service", to make arrangements for defining the service
supply modalities.
1.11.2. SPARE PARTS
The parts to be possibly replaced must be " TESI ORIGINAL SPARE PARTS", to be purchased at our central

18 PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00
store.
Using not original spare parts not only causes the warranty loss, but also exonerates TESI s.r.l. from any
responsibility.
When ordering any spare parts, always specify the following data:
portable high-energy igniter XE18PB06 type;
Serial number;
Year of manufacture.

PORTABLE HIGH-ENERGY IGNITER –XE18PB06 - Rev.00 19
2. GENERAL TECHNICAL INFORMATION