Texas Instruments TI-34 - MultiView Scientific Calculator User manual

TI-34 MultiView
Clear previous data:
Press .
You will see CLEAR CNVRSN and a list underneath. Press the number ke .
Entering Data (single list of data point
with each with frequency 1
Entering Data (from a frequency
distribution
Press .
You should see L1, L2, and L3 lists
Input the first data number under L1.
Press .
Input the second data number.
Press .
Continue until ou have entered all the
data.
Calculating mean and standard
deviation
Press (above the
ke ).
You will see 1: 1-Var Stats. Press the
number ke .
You will see
1-Var Stats
Data: L1 L2 L3
Frq: ONE L1 L2 L3
You want there to be a black background
and white letters on L1 in the data list and
ONE in the frq list. If ou have to change
these, ou press to switch to the
data and . Then press
Press .
You should see L1, L2, and L3 lists
Input the first data number under L1.
Press .
Input the second data number.
Press .
Continue until ou have entered all the
data.
Now press to move to L2.
Input the first frequenc number under L2.
Press .
Input the second frequenc number.
Press .
Continue until ou have entered all the
frequenc
.
Calculating mean and standard
deviation
Press (above the
ke ).
You will see 1: 1-Var Stats. Press the

to switch to the frq and
Press ( ou see a black box
around CALC on the bottom right. Press
.
x
is the mean.
x
S
is the standard deviation.
number ke .
You will see
1-Var Stats
Data: L1 L2 L3
Frq: ONE L1 L2 L3
You want there to be a black background
and white letters on L1 in the data list and
L2 in the frq list. If ou have to change
these, ou press to switch to the
data and . Then press
to switch to the frq and press
and
Press ( ou see a black box
around CALC on the bottom right. Press
.
x
is the mean.
x
S
is the standard deviation.

2nd
STAT
DATA
down arrow
ENTER
right
arrow