Texecom Premier Elite Odyssey 5-W User manual

Technical Support : 91520 10269 : [e-mail]
Press 1234 on the control panel. The below message will be displayed.
Press Yes
Press any free zone number (021) to learn your hooter
Press reset button
When it starts learning you need insert the 8 Batteries into the hooter
Press Menu ( ) two times on the control panel and then press Yes to logoff
from your control panel
Caution: Do not change Zone
type & Wiring type.
Step 1:
Premier Elite Odyssey 5-W (GBT0002)

Technical Support : 91520 10269 : [e-mail]
Caution: If Hold-Off mode is invoked but the tamper circuit is not opened or
remote power is not removed within 15 mins then Hold-Off will automatically
start to cancel, indicated by the LEDs alternating rapidly for a further 2
minutes.
Step 2:
You should Power ON by placing the Jumper.
POWER :
COMFORT LEDs :
ON OFF
SOUNDER TIME :
15mins 3mins
1. How to identify the LED status, when the hooter is not getting activated?
FAQ:
2. Where do I place the 8 batteries in the wireless hooter?
Ans:The right side image will give you an idea on placing
of 8 batteries inside the hooter & here only 4 batteries
will be visible & rest 4 batteries will come back to it.