Textron Ransomes CT445 Specifications

Ransomes Way, Ipswich, England, IP3 9QG
RANSOMES
CT445 COMPACT TRACTOR
GB
OPERATORS INSTRUCTIONS
Publication No. 24081G (rev.1) (RSJ 001 101997)

1
PLEASEREADCAREFULLY:
Foracompletelistofthepre-deliveryservicechecksperformedby your dealer, refer to PRE-DELIVERYSERVICEon the upper portion of page
61and 63. The copy on page 61 is your record of the serviceperformed,andthe copy on page 63, which is to be removed from the manual, is
your dealer’s. MAKE SURETHAT YOUAND THE DEALER SIGN BOTH COPIES.
Afteryou have operated your tractorforfiftyhours,takethis manual and your tractortoyour dealer.Hewill then perform thefactory recommended
50-HOURSERVICEaslistedonthelowerportionsofpages61and63-withoutcharge - except for lubricant, oil, or filters replaced as part of
normal maintenance. MAKE SURE THATYOUANDTHE DEALER SIGN BOTH COPIES.
APRODUCTIDENTIFICATION PLATEis located on the left-handsideofthetransmissionhousing.Thenumbersontheplateareimportant
shouldyour tractor requirefutureservice. For your convenience,haveyour dealer recordthenumbers in the appropriatespacesbelow.
RANSOMESpolicy is one of continuous improvement, andtheright to change prices, specification or equipmentatanytime without notice is
reserved.
Alldata given in thisbookis subject to production variations.Dimensionsand weights are approximate onlyand the illustrations donotnecessarily
showtractors in standardcondition. For exact informationaboutany particulartractorplease consult your RANSOMESTractorDealer.

2
INTERNATIONAL SYMBOLS ..................................................................................3
SAFETY PRECAUTIONS ...................................................................................... 4-5
CONTROLS AND INSTRUMENTS....................................................................... 6-13
SEAT AND ROPS ....................................................................................................6
LIGHTING ................................................................................................................7
INSTRUMENT PANEL ........................................................................................... 7-9
THROTTLE CONTROLS .........................................................................................9
BRAKE CONTROLS ...............................................................................................10
DIFFERENTIAL CONTROL ....................................................................................10
TRANSMISSION AND PTO CONTROLS............................................................ 10-12
HYDRAULIC LIFT SYSTEM CONTROLS ........................................................... 12-13
OPERATION ........................................................................................................ 14-29
BREAK-IN PROCEDURES .....................................................................................14
STARTING THE ENGINE .................................................................................... 14-15
STOPPING THE ENGINE ......................................................................................15
OPERATING THE TRANSMISSIONS,
FOUR-WHEEL DRIVE AND PTO........................................................................ 15-18
TOWINGTHETRACTOR.........................................................................................18
OPERATING THE DIFFERENTIAL LOCK .............................................................19
OPERATING THE HYDRAULIC LIFT SYSTEM .................................................. 19-22
DRIVING THE TRACTOR.................................................................................... 22-24
WHEEL TREAD SETTINGS................................................................................ 24-25
TRACTOR WEIGHTING.........................................................................................26
TYRE PRESSURES ............................................................................................ 28-29
LUBRICATION AND MAINTENANCE.................................................................. 30-53
LUBRICATION AND MAINTENANCE CHART .................................................... 30-31
FUEL AND LUBRICANTS.................................................................................... 32-35
FUEL AND LUBRICANT SERVICE PROCEDURES ........................................... 35-40
GENERAL MAINTENANCE ................................................................................. 40-51
TRACTOR STORAGE ......................................................................................... 51-52
GENERAL TORQUE SPECIFICATION TABLE ......................................................53
SPECIFICATIONS ............................................................................................... 54-58
SAFETY DECALS AND INSTRUCTION DECALS .............................................. 59-64
PREDELIVERY AND 50-HOUR SERVICE .......................................................... 65-67
CONTENTS

3
INTERNATIONAL SYMBOLS
Asa guide to the operation ofyourtractor,
variousinternational symbolshave been
utilisedon the instruments and controls.
Thesymbols are shown belowwithan
indicationof their meaning.
Enginespeed
Hoursrecorded
Enginewater
temperature
Airfilter
Engineoil
pressure
Hazardwarning
Axleconnect
Axledisconnect
Continuously
variable
Increase
Decrease
Fuellevel
Creeperrange
High range
Middlerange
Lowrange
Neutral
Dieselfuel
Glow
Enginestop
Engineoil
Parkingbrake
Lights(upper
beam)
Lights(lower
beam)
Lock
Releaselock
Up
Down
Differentiallock
Readoperator’s
manual
Battery
Powertake-off
(on)
Powertake-off
(off)
“Tortoise,”slow or
minimumsetting
“Hare,”fast or
maximumsetting
Warning
Controllever
operating
direction
Rockshaft
(raised)
Rockshaft
(lowered)
Remotecylinder
(float)
Remotecylinder
(retracted)
Remotecylinder
(extended)
Forward
Warning!
contains
asbestos

4
pressurisinglines.
Iffluid is injected into the skin, obtain medical attention
immediatelyor gangrenemay result.
7. Donotmodifyor alter or permit anyone elsetomodify or
alterthis tractor or any of its components or any tractor
function
withoutfirst consulting RANSOMESTractor Dealer.
8. Thefuel oil in the injection system is under highpressure
andcan penetrate the skin.Unqualifiedpersons should not
removeor attempt toadjusta pump, injector, nozzle orany
otherpart of the fuel injection system.Failureto follow these
instructionscan result in serious injury.
9. continuouslongtermcontact with used engine oilmay
causeskin cancer.Avoid prolonged contact with used
engineoil. wash skin promptlywith soap and water.
10. Somecomponentsonyour tractor,such as gasketsand
frictionsurfaces (brake linings, clutch linings etc.), may
containasbestos. Breathing asbestos dust isdangerousto
yourhealth.You are thereforeadvised tohaveany
maintenanceof repair operationson such components
carriedout by an authorised SHIBAUARATractor Dealer. If
however,serviceoperations are tobe undertakenon parts
thatcontain asbestos, theessentialprecautions listed below
mustbe observed:
• Work out of doors orinawell ventilated area.
•. Dustfoundonthe tractor or produced during work on the
tractorshould be removedby extraction notbyblowing.
• Dustwaste should be dampened,placedin a sealed
containerand marked toensuresafe disposal.
• Ifany cutting, drilling, etc., is attempted onmaterials
containingasbestos, the itemshould be dampened andonly
handtools or low speedpower tools used.
OPERATING THE TRACTOR
1. Applythe parkingbrake, place theP.T.O. lever in the “OFF”
position,the lift control lever inthe down position, the remote
controlvalve levers intheneutral position, andthe
transmissionin neutral before startingthe tractor.
2. Donotstartthe engine or operate controlswhilestanding
besidethe tractor.Always sit in the tractor seat when
startingthe engine oroperatingcontrols.
3. Donot bypasstheneutral start switches. consult your
RANSOMESTractor Dealer if your neutral start controls
malfunction.Use jumper cables onlyin the recommended
manner.Improperuse can result intractorrunaway.
4. Avoid accidental contactwith thegearshiftlevers while the
engineis running. Unexpectedtractormovement can result
fromsuch contact.
5. Donot get offthe tractor while it is in motion.
6. DisengagePTO,shut offthe engineandapplythe parking
brakebefore getting off the tractor.
7. Donot parkthetractoron a steep incline.
8. Donotoperatethe tractor engine inanenclosed building
withoutadequate ventilation.Exhaustfumes cancause
death.
9. Ifpowersteeringor engine ceases operating,stopthe
tractorimmediately.
10. Pullonlyfrom the drawbar or the lowerlinkdrawbar in the
downposition. Use only a drawbar pinthatlocks in place.
Pullingfrom the tractorrearaxle or any pointabovethe axle
maycause the tractor to upset.
SAFETY PRECAUTIONS
Thefollowing precautions aresuggestedto help prevent accidents.
Acareful operator is the best operator. Most accidents canbe
avoidedby observingcertainprecautions. Readandtake the
followingprecautions before operatingthistractor to helpprevent
accidents.Equipment should beoperatedonly by thosewhoare
responsibleand instructed to do so.
THE TRACTOR
1. ReadtheOperator’sManualcarefully before using the
tractor.Lackof operating knowledge canleadto accidents.
2. Ensurethatanyattached equipment or accessoriesare
correctlyinstalled,are approved for use withthetractor,do
notoverload thetractorand are operatedand maintained in
accordancewith the instructions issued bytheequipment or
accessorymanufacturer.
3. UseanapprovedRoll bar and Seat Beltforsafe operation.
Overturninga tractor without a roll bar can resultindeathor
injury. If your tractor is not equipped with a roll bar andseat
belt,see your RANSOMESTractor Dealer. Always use the
seatbelt. Do not use the seat belt if the roll bar has been
removedfrom the tractor.
4. Ifa front end loader is to be installed, always useaFOPS
canopyto avoid injury fromfallingobjects.
5. Usethe handholdsandstep plates when getting on and off
thetractor to prevent falls. Keepstepsand platform cleared
ofmud and debris.
6. Donotpermitanyone but the operator torideon the tractor.
Thereis no safe place for extra riders.
7. Rememberthatyourtractor,ifabusedor incorrectly used,
canbe dangerous and becomea hazard to boththe
operatorand bystanders. Donotoverload or operatewith
attachedequipment which is unsafe, notdesignedfor the
particulartasks or is poorlymaintained.
8. Replaceallmissing,illegible, or damaged safetydecals.
Seelist of decals on page 53.
9. Keepsafety decalscleanof dirt and grime.
SERVICING THE TRACTOR
1. Thecooling systemoperatesunder pressure which is
controlledby the radiator cap.Itis dangerous to removethe
capwhile system is hot. Always turn cap slowly to the first
stopand allow thepressureto escape before removingthe
capentirely.
2. Donotsmokewhile refuelling the tractor.Keep anytypeof
openflame away.wait forengineto cool before refuelling.
3. Keepthetractorand equipment, particularlybrakesand
steering,maintained in areliableand satisfactory condition
toensure your safetyandcomply with legalrequirements.
4. Keepopenflameaway from batteryorcold weather starting
aidsto prevent fires or explosions.Usejumpercables
accordingto instructions to prevent sparks which could
causeexplosion.
5. Stoptheenginebefore performing anyserviceon the
tractor.
6. Escapinghydraulic/dieselfluidunderpressure can
penetratethe skin causing seriousinjury.
• DoNOT use your hand to check for leaks. Use a piece of
cardboardor paper to search forleaks.
• Stopengine and relievepressurebefore connecting or
disconnectinglines.
• tightenall connections beforestartingengine or

5
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS (Continued)
11. Ifthe front end of the tractor tends to rise when heavy
implementsare attached to thethree-pointhitch, install front
endor front wheel weights. Donotoperate the tractor with a
lightfront end.
12. Alwayssetthe hydraulic selector leverinposition control
whenattaching equipmentandwhen transporting
equipment.Be sure hydrauliccouplersare properly
mountedand will disconnect safely in caseofaccidental
detachmentof implement.
13. Donotleave equipment intheraised position.
DRIVING THE TRACTOR
1. watchwhereyouare going especially atrow ends, on roads,
aroundtrees and lowhanging obstacles.
2. Toavoidupsetsdrivethe tractor with care and at speeds
compatiblewithsafety,especially whenoperatingover rough
ground,when crossing ditches or slopes, and whenturning
corners.
3. Locktractorbrakepedals together whentransportingon
roadsto providetwowheel braking.
4. Keepthetractorin the same gear whengoingdownhill as
usedwhen going uphill. Do not coastorfree wheel down
hills.
5. Anytowedvehiclewhose total weightexceeds that of the
towingtractor must be equipped with brakesforsafe
operation.
6. whenthe tractor is stuck ortiresarefrozentothe ground,
backup the tractor to prevent upset.
7. Alwayscheckoverhead clearance, especiallywhen
transportingthe tractor.
8. Whenoperating atnight,adjust lights to prevent blinding an
oncomingdriver.
OPERATING THE PTO
1. Whenoperating P.T.O driven equipment, shut offthe engine
andwait until the P.T.O. stopsbefore getting off the tractor
anddisconnecting theequipment.
2. Donotwearloose clothing whenoperating the power
takeoff,orwhen near rotating equipment.
3. WhenoperatingstationaryP.T.O.drivenequipment, always
placeboth gear shift levers inneutral,applythe tractor
parkingbrake and block the rearwheelsfront and back.
4. To avoid injury,donot clean, adjust, unclog or service P.T.O.
drivenequipment when thetractorengine is running.
5. Makesure the P.T.O.master shield is installed at all times
andalways replace the P.T.O. shield capwhentheP.T.O.is
notin use.
DIESEL FUEL
1. Undernocircumstancesshould gasoline, alcohol or
blendedfuels be added todieselfuel. These combinations
cancreate an increased fireorexplosive hazard. Such
blendsare more explosivethanpure gasoline inaclosed
containersuch as a fuel tank. Do not use these blends.
2. Neverremovethefuel cap or refuel withtheengine running
orhot.
3. Donotsmokewhile refuelling or when standingnearfuel.
4. Maintaincontrol ofthefuel filler pipe nozzle when filling the
tank.
5. Donot fill the fuel tank to capacity.Allow room for
expansion.
6. Wipeupspilled fuel immediately.
7. Alwaystightenthefuel tankcap securely.
8. Ifthe original fuel tank cap is lost, replace it with a
RANSOMESapproved cap.Anon-approved, proprietary
capmay not be safe.
9. Keepequipmentclean andproperlymaintained.
10. Donotdrive equipment near openfires.
11. Neveruse fuel for cleaning purposes.
12. Arrangefuelpurchases so that summer grade fuels are not
heldover and used in thewinter.
SAFETY FRAME (ROPS)
IfyourRANSOMESTractor is equipped with a safety frame it must
bemaintained in aserviceablecondition. Be carefulwhendriving
throughdoorways or workinginconfined spaces withlowheadroom.
Underno circumstances:
1. .. . . modify, drill or alter the safety frame in any way as
doingso could renderyouliable to legal prosecution.
2. .. . . attempt to straighten orweldanypartofthemainframe
orretainingbracketswhichhave suffered damage. By doing
soyou may weakenthe structure andendangeryour safety.
3. .. . . secure any parts on the main frame or attach your
safetyframe with other than the specialhightensile bolts
andnuts specified.
4. .. . . attach chains or ropes to the main frame for pulling
purposes.
5. .. ..takeunnecessary risks even though your safety frame
affords you themaximumprotection possible.
5
When you See this symbol it means: ATTENTION! BECOME ALERT! YOUR SAFETY IS Involved!

6
CONTROLS AND INSTRUMENTS
SEAT AND ROPS
TRACTOR SEAT
Your RANSOMES Tractor is equipped with a
suspension seat as shown in Figure 1. The seat is
adjustable to obtain the most comfortable position.
To move the seat fore and aft, move the seat
release lever to the right and slide the seat fore and
aft as desired, Figure 2.
To adjust the seat for flotation, turn the flotation
adjusting bolt right for a firm ride, or left for a soft
ride, Figure 2.
Figure 1 - Tractor Seat and ROPS
Figure 2 - Tractor Seat Adjustment
ROLLOVER PROTECTIVE STRUCTURE (ROPS)
A Roll Over Protective Structure (ROPS) are
optional equipment for this tractor at time of factory
assembly. If the ROPS was deleted by the original
purchaser or has been removed, it is recommended
that you equip your tractor with a Roll Over
Protective Structure (ROPS). ROPS are effective in
reducing injuries during tractor over-turn accidents.
Overturning tractor without a ROPS can result in
serious injury or death.
Roll Over Protective Structure (ROPS) are available
from your RANSOMES Tractor Dealer.
The safety offered by the roll bar is minimised.
WARNING: DO NOT attach chains or
ropes to the roll bar for pulling purposes
poses since the tractor can tip
backward. Always pull from the tractor
drawbar. Be careful when driving
through door openings or under low
overhead objects. Make sure there is
sufficient overhead clearance for the
roll bar.

7
CONTROLS AND INSTRUMENTS
LIGHTING
FLASHER WARNING LAMP
Your RANSOMES tractor is equipped with flasher
warning lights, Figure 3. The switch, Figure 4 for the
warning lights is located on the instrument panel.
Figure 3 - Flasher Warning andTail Lamp
The light switch must be turned to one of the “ON”
positions before the flasher will operate. For your
protection, use the safety flasher lights when
travelling on public roads, day or night.
LIGHT SWITCH
The light switch, shown in Figure 4, is a pull type
switch. lts positions are
1 st position OFF”
2nd position Tail Lamp “ON”
3rd position Headlights (Low Beam), and Tail Lamp
“ON”
4th position Headlights (High Beam), and Tail Lamp
“ON”
Figure 4 - Light Switch
INSTRUMENT PANEL
KEY SWITCH
The key switch is shown in Figure 5. Turning the
‘key to the left will activate the cold-start aid.
Turning the key to the right to the “on” position will
activate the warning lights and instruments. Turning
mg the key further right to the “start” position will
start the engine. Upon release, the key will spring
return to the “on” position.
Figure 5 - Instrument Panel
The starting circuit can only be activated when the
clutch pedal is. fully depressed and P.T.O. control
lever and MID P.T.O. control lever (if equipped) are
in the “OFF” position. Always check to make certain
the transmission main shift lever and P.T.O. levers
are in neutral before attempting to start the engine.
Refer to page 14 for complete starting instructions.

8
CONTROLS AND INSTRUMENTS
FUEL GAUGE
The fuel gauge is shown in Figure 5 and 6. The
needle indicates the amount of fuel in the tank.
Figure 6 - Temperature Gauge and Fuel Gauge
FUEL SHUTOFF VALVE
The fuel shutoff valve is shown in Figure 7. To open
the fuel shutoff valve, move the handle so
Figure 7 - Fuel Shutoff Valve
that it points straight up and down. To close the fuel
shutoff valve, move the handle to the horizontal
position. Always shut off the valve ‘When servicing
any portion of the fuel system.
WARNING LIGHTS
The engine oil pressure, charge indicator, glow plug
indicator and air cleaner warning lights are located
as shown in Figure 5. When the key switch is turned
“ON” these lights will come on. After the engine has
been started, the lights should go out within a few
seconds. If they do not go out:
• Engine oil pressure warning light : Stop the
engine immediately and investigate the
cause. It is important to remember that this
light indicates oil pressure only. The operator
must regularly check the crankcase for proper
oil level.
• Charge indicator warning light : This is an
indication that the charging system is not
operating normally. Investigate the cause as
soon as possible, otherwise the battery will
become fully discharged.
• The glow plug indicator warning light : This
light comes on when turning the key switch to
the “HEAT” position and “START” position.
Refer to page 14 for starting engine
information.
• Coolant warning light: If the light comes on,
check the coolant level in the coolant reserior.
Add coolant so the level is between FULL and
LOW marks on the side of the reseroir.
• Air cleaner warning light : This is an
indication that the air cleaner element is
clogged. Disassemble the air cleaner, and
clean. Refer to page 40.
• Parking brake warning light: This light comes
on only when the parking brake is applied.
Release the parking brake before moving the
tractor.
NOTE: Make certain that all warning lights turn on
for a moment when turning the key switch to the
“START” position. If one of the warning lights does
not turn on, the bulb should be replaced.
PROOF-METER
The Proof-Meter is located on the right side of the
instrument panel, Figure 5 The Proof-Meter
indicates: