TH COMMUNICATIONS MZ11D7 User manual

Manual Rev 1.1
MZ11D7
DOOR ACCESS CONTROLLER
QUICK START GUIDE MANUAL
MICRO ID SDN BHD
TH COMMUNICATION SDN BHD www.thcomm.com.my [email protected]

Manual Rev 1.1
USER LIST
Card No.
Name.
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
Card No.
Name.
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085

Manual Rev 1.1
Operation Instruction
i. Restore to factory default settings
Step 1: Switch “Off” power than Switch “On” Power (or Press Reset Button at Controller)
Step 2: Press “0”
Step 3: Press “Enter”
Step 4: Press “888”
Step 5: Press “Esc”
Note: only restore the program password and parameter settings, the authorized cards will
not be deleted
ii. Enter Programming mode
Step 1: Press “Enter”
Step 2: Input program password (default password “1234”)
Note: if entering in program mode successfully, the buzzer will make 2 short “di di” sound
Function setup
a. Key “0”: change programming Pin (4 digits)
Step 1: Enter programming mode
Step 2: Press “0”
Step 3: Input new password
Step 4: Press “Enter”
b. Key “1”: Add Card By Reader
0. Read Card : (Auto save location)
Step 1: Enter programming mode
Step 2: Press “1”
Step 3: Press “0”
Step 4: Present the card
Step 5: Repeat step 4 if got more cards
Step 6: Press “Enter”
Step 7: Press “Esc”
1. Save Card with ID: (Manual save Location )
Step 1: Enter programming mode
Step 2: Press “1”
Step 3: Press “1”
Step 4: Press (000 –999) 3 Digit ID
Step 5: Present the card
Step 6: Press “Enter”
Step 7: Repeat Step 4, 5, 6 if got more cards
Step 8: Press “Esc”
Card added successfully will make 2 short “di di”, otherwise a long “di” sound.
Note:

Manual Rev 1.1
c. Key “2”: Add Card By Keypad
0. Read Card : (Auto save location)
Step 1: Enter programming mode
Step 2: Press “2”
Step 3: Press “0”
Step 4: Enter 5 digit card number.
Step 5: Press “Enter”
Step 6: Repeat step 4, 5 if got more cards
Step 7: Press “Esc”
1. Save Card with ID: (Manual save Location )
Step 1: Enter programming mode
Step 2: Press “2”
Step 3: Press “1”
Step 4: Press (000 –999) 3 Digit ID
Step 5: Enter 5 digit card number.
Step 6: Press “Enter”
Step 7: Repeat Step 4, 5, 6 if got more cards
Step 8: Press “Esc”
Card added successfully will make 2 short “di di”, otherwise a long “di” sound.
d. Key “3”: Delete User
0. Delete card: (Auto Location)
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “0”
Step 4: Present the card
Step 5: Repeat step 4 if more than one card
Step 6: Press “Enter”
1. Delete user id:
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “1”
Step 4: Input user id (000-999)
Step 5: Press “Enter”
Step 6: Repeat step 4, 5if more than one id
Step 7: Press “ESC”
2. Delete Card Number:
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “2”
Step 4: Enter 5 Digit Card Number
Step 5: Press “Enter”
Step 6: Repeat step 4, 5if more than one card number
Step 7: Press “ESC”
Note:

Manual Rev 1.1
3. Delete All :
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “3”
Step 4: Press “999”
Step 5: Wait for 1min to delete all cards.
Note: The back light of the keypad “3,6,9,enter” will be off.
e. Key “4”: Lock Release Mode
0. Lock Release Time: (How long the lock will be open)
Step 1: Enter programming mode
Step 2: Press “4”
Step 3: Press “0”
Step 4: Enter (01-99)s Default : 05 seconds
Step 5: Press “Enter”
1. Toggle Mode:
Step 1: Enter programming mode
Step 2: Press “4”
Step 3: Press “1”
Step 4: Press “Enter”
f. Key “5”: Door Open Time (How long the door can be open before buzzer makes noise)
Step 1: Enter programming mode
Step 2: Press “5”
Step 3: Input time (01 - 99 seconds) Default: 00 seconds
Step 4: Press “Enter”
Note: If time set “00”, this will Disable Alarm.
g. Key “6”: Add User Pin
0. Read card: (Auto Location)
Step 1: Enter programming mode
Step 2: Press “6”
Step 3: Press “0”
Step 4: Present the card
Step 5: Enter 4 Digit Pin.
Step 6: Press “Enter”
Step 7: Repeat step 4, 5, 6 if more than one card
Step 8: Press “ESC”
1. Card Number:
Step 1: Enter programming mode
Step 2: Press “6”
Step 3: Press “1”
Step 4: Enter 5 Digit Card Number
Step 5: Enter 4 Digit Pin.
Step 6: Press “Enter”
Step 7: Repeat step 4, 5, 6 if more than one card number
Step 8: Press “ESC”

Manual Rev 1.1
h. Key “7”: Door Open Mode
0. (Card or Pin –Default)
Step 1: Enter programming mode
Step 2: Press “7”
Step 3: Press “0”
Step 4: Press “Enter”
1. (Card + Pin)
Step 1: Enter programming mode
Step 2: Press “7”
Step 3: Press “1”
Step 4: Press “Enter”
2. (Permanent Open)
Step 1: Enter programming mode
Step 2: Press “7”
Step 3: Press “2”
Step 4: Press “Enter”
3. (Permanent Lock)
Step 1: Enter programming mode
Step 2: Press “7”
Step 3: Press “3”
Step 4: Press “Enter”
4. (Card Only)
Step 1: Enter programming mode
Step 2: Press “7”
Step 3: Press “4”
Step 4: Press “Enter”
i. Key “8”: Common Pin
0. Set Common Pin
Step 1: Enter programming mode
Step 2: Press “8”
Step 3: Press (4 Digit Number)
Step 4: Press “Enter”
1. Delete Common Pin
Step 1: Enter programming mode
Step 2: Press “8”
Step 3: Press “0”
Step 4: Press “Enter”

Manual Rev 1.1
Access Method:
a) Card or Pin
- Batch card at the keypad (or) Press ‘ ESC ’ < 4-digit Pin Number >
b) Card and Pin
- Batch card at the keypad (and)
- 4-digit Pin Number
c) Common Pin Access method
- Press (*)
- Enter 4-digit Common Number
Note:
a) To clear from program mode or any setting
-Press star ‘*’and make sure no LED indication
b) No Backlight and RED light blinking, it’s in ideal mode.
c) When entering programming mode the RED light will stay “ON”
d) When press star ‘*’ and the RED and GREEN light stay “ON” it’s for entering Pin
indication
Indications:
Status
Buzzer
Bi-Color LED
RED
GREEN
Standby Mode
None
Blinking
Programming Mode
None
On
Valid Key Press
1 Beep
Off
Blink Once
Valid Entry
2 Beep
On
Invalid Entry
5 Beep
On
Valid Verification
2 Beep
On
Invalid Verification
5 Beep
On
Enter Pin
None
On
On
Pin Entry
1 Beep
Blink
Stay On
Card Save Success
1 long beep + 2 Beep
Stay On
On (Short)
Card Save Fail
1 long beep + 5 Beep
Stay On
All Clear (Waiting)
None
Off
Off
TH COMMUNICATION SDN BHD www.thcomm.com.my [email protected]