The Container Store 10054253 User manual

8-Pair Shoe
Organizer
Assembly Instructions
Please read all of the information below before you begin.
Parts and Hardware
Step 1
Attach fixed shelves (A) to side (B) with assembly screws (F).
Assembly Tools Required
A. Fixed Shelf (2)
B. Side Panel (2)
C. 3-Slot Divider (1)
D. 1-Slot Divider (3)
E. Back Panel (1)
F. Screw (8)
G. Screw Cover (8)
H. Nail (10)
I. Dowel Cover (2)
J. Dowel (2)
Hammer
#2 Phillips head screwdriver
Step 2
1. Attach the 2nd side (B) to fixed shelves (A) with assembly screw (F).
2. Cover all exposed screw heads with cover caps (G).
A
A
B
F
AF
G
AC
D
B
E
F
G
H
I
J
unfinished edge
NOTE: Both side panels are identical
unfinished edge
unfinished edge
A
B

WARNING CHOKING HAZARD — This unit contains small parts. Not for children under 3 years old.
©2014 The Container Store Inc. All rights reserved. 22659 8/14
Step 3
Slide the 1-slot dividers (D) and 3-slot dividers (C) together as shown.
Step 4
Insert the combined dividers into the frame (fit into grooves).
Step 5
Position the back panel (E) over the center of the back of the unit.
Secure the back panel with a hammer and nails (H), being careful
to drive the nails straight in (not at an angle).
Step 6
If stacking more than one unit, use the dowels (J) to join them.
Insert the dowel covers (I) into the dowel holes on the top unit.
H
C
D
E
D
finished edge
(front side)
JI
stacked units
D